Homeowners typically pay a broad range for a 10×14 concrete slab, driven by concrete cost, reinforcement, labor, and site preparation. This guide frames the cost landscape with clear low–average–high ranges and per-square-foot estimates to help budgeting.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (concrete) @ $2.50–$4.50/sq ft | $350 | $490 | $630 | Excludes special mixes |
| Labor (pour, finish) @ $4.50–$9.50/sq ft | $630 | $980 | $1,330 | Includes forming, finishing |
| Equipment & tools | $70 | $70 | $70 | Rental or mobilization |
| Permits | $50 | $150 | $400 | Local requirements vary |
| Delivery/Haul-away | $0 | $75 | $150 | Site access dependent |
| Contingency & Misc. | $0 | $30 | $150 | Hidden costs |
| Total estimate | $1,100 | $1,720 | $2,580 | Assumes standard site prep |
| Per sq ft | $7.86 | $12.29 | $18.57 | Based on 140 sq ft |
Overview Of Costs
Typical project cost ranges for a 10×14 slab span from about $1,100 up to $2,600, depending on concrete grade, reinforcement, site prep, and local labor rates. Assumptions include standard rebar or wire mesh, simple formwork, and no decorative finishes. Per-square-foot pricing commonly falls in the $7–$19 range.
Cost Breakdown
Below is a table that breaks out common cost elements for a 10×14 slab, with brief assumptions and typical ranges. Prices vary by region and site conditions.
| Element | Low | Average | High | Assumptions |
|---|---|---|---|---|
| Materials | $350 | $490 | $630 | Plain concrete mix, standard slump |
| Labor | $630 | $980 | $1,330 | Pour, strike-off, broom finish |
| Equipment | $70 | $70 | $70 | Form setup, tooling |
| Permits | $50 | $150 | $400 | Municipal permit where required |
| Delivery/Disposal | $0 | $75 | $150 | Local access impact |
| Contingency | $0 | $30 | $150 | Weather, crack repair reserve |
| Total | $1,100 | $1,720 | $2,580 | Assumes standard site prep |
Assumptions: region, specs, labor hours.
data-formula=”labor_hours × hourly_rate”>
What Drives Price
Major price factors include concrete mix type, reinforcement method, slab thickness, and site preparation. A thicker slab or higher-strength concrete increases material and labor costs. Subgrade conditions, drainage work, and accessibility significantly influence labor time and mobilization fees.
Regional Price Differences
Prices vary by region due to labor markets and material costs. In urban areas, expect higher labor rates and permit costs; suburban markets around mid-range; rural areas may offer lower labor but higher transport fees for materials. A typical delta can be ±20% between regions.
Labor, Hours & Rates
Pouring and finishing time scales with slab complexity. Standard 10×14 slabs may require 6–12 hours of labor for a crew of 2–4, with hourly rates ranging from $60 to $150 per hour depending on locale and crew skill. Include setup and curing time but note that curing does not add labor beyond initial pour.
Real-World Pricing Examples
Three scenario snapshots help illustrate variability across projects.
- Basic — Plain slab, standard subgrade, no reinforcement upgrade: 6 hours labor, materials at low end; total ≈ $1,100–$1,400; ≈ $8–$10/sq ft
- Mid-Range — Concrete with mesh reinforcement, basic edge finishes, minor site prep: 8–10 hours labor; total ≈ $1,600–$2,000; ≈ $11–$14/sq ft
- Premium — High-strength mix, rebar, thicker edge, substantial site work or drainage: 10–12 hours labor; total ≈ $2,200–$2,600; ≈ $16–$19/sq ft
Assumptions: region, specs, labor hours.
Additional & Hidden Costs
Surprises often come from site preparation and finishes. Common extras include moisture barriers, decorative toppings, sealed edges, or added slope to drain water away from structures. Permits and inspections may incur fees not included in initial bids and delivery charges can vary with distance from the supplier.
Ways To Save
Smart planning can trim expenses without sacrificing quality. Consider scheduling during off-peak seasons, consolidating projects to lower mobilization costs, using standard finishes rather than decorative options, and obtaining multiple bids to benchmark pricing.
Price At A Glance
National snapshot: 10×14 concrete slab cost ranges from approximately $1,100 to $2,580 before curb appeal or extra features. Per-square-foot pricing typically spans $7.90–$18.60, reflecting regional labor markets and material choices.