Homeowners typically pay a wide range for a 60-by-80-foot concrete slab, driven by thickness, reinforcement, and site work. The price includes materials, labor, and potential extras, with total costs spanning from basic to premium setups. cost and price considerations should be reviewed early to align with budget and project goals.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 60×80 slab area | 4,800 sq ft | 4,800 sq ft | 4,800 sq ft | Foundation footprint |
| Slab thickness | 4 inches | 4 inches | 6 inches | Impact on volume |
| Concrete cost | $140/yd3 | $160/yd3 | $180/yd3 | Delivery, mix, strength |
| Reinforcement | $0-$2,000 | $2,500-$4,500 | $5,000-$7,500 | Rebar or welded wire mesh |
| Labor & installation | $4,500-$6,500 | $10,000-$14,000 | $20,000-$28,000 | Finishing, finishing time |
| Permits & inspections | $0-$500 | $1,000-$2,000 | $3,000-$4,000 | Local rules vary |
| Delivery & mobilization | $500-$1,000 | $1,500-$2,500 | $3,000-$4,500 | Site access impact |
| Finishing options | $0-$1,000 | $2,000-$4,000 | $6,000-$8,000 | Stamps, broom finish, texture |
| Total project cost | $9,000-$12,000 | $25,000-$30,000 | $40,000-$60,000 | Assumes standard job setup |
Overview Of Costs
Estimated project ranges for a 60-by-80-foot concrete slab cover a broad spectrum. For a basic 4-inch slab with minimal reinforcement, total costs often land around $9,000 to $12,000, largely driven by material and basic labor. A mid-range installation with mesh reinforcement, standard finishing, and modest site prep typically sits between $25,000 and $30,000. Premium setups—thicker slabs, substantial rebar, specialty finishes, or complex site work—can exceed $40,000 and approach $60,000. These ranges assume a typical residential site with standard access and no unusual permitting barriers. Assumptions: region, specs, labor hours.
Cost Breakdown
| Category | Low | Average | High | Notes | Units |
|---|---|---|---|---|---|
| Materials | $6,000 | $9,000 | $14,000 | Concrete mix, screed, reinforcement | $/project |
| Labor | $4,500 | $10,000 | $20,000 | Pour, finish, cure | $/project |
| Equipment | $500 | $1,500 | $3,000 | Concrete pump, power trowel | $/project |
| Permits | $0 | $1,000 | $4,000 | Local inspection fees | $ |
| Delivery/Disposal | $500 | $2,000 | $4,500 | Truck time, waste removal | $ |
| Finishes | $0 | $3,000 | $8,000 | Broom, stamped, or textured | $ |
What Drives Price
Volume and thickness directly affect concrete need; a 4-inch slab uses less material than a 6- or 8-inch slab, and larger volumes amplify savings or costs. Site accessibility impacts mobilization, equipment rental, and labor hours, especially in tight lots or multi-story installations.
Key numeric thresholds include thickness choices (4″, 5″, 6″+) and reinforcement decisions (none, mesh, or rebar). For example, add $2,500 to $7,500 for mesh or rebar in a 4-inch slab, depending on spacing and material quality. Another driver is finishing: broom or stamp finishes add 2,000–8,000 or more to the total, depending on texture and pattern.
Ways To Save
Plan for off-peak timing and request multiple quotes to compare price estimates; markets often shift with demand. Consider standard finishes and avoid specialty stamps or colors in early projects to reduce material and labor costs. Coordinating site prep, pour timing with occupants, and limiting subsequent concrete work can minimize delays and add-on charges.
Practical savings also come from combining the slab with adjacent concrete work to optimize mobilization and crew utilization. Assumptions: region, specs, labor hours.
Regional Price Differences
Prices vary across the U.S. due to labor markets, material costs, and permitting. In the Southeast, basic slabs may trend toward the lower end of the spectrum, while the Northeast and West Coast often show higher framing and labor costs. In urban cores vs. suburban sites, delivery, access, and permit fees can swing totals by roughly ±15% to ±30%.
Labor & Installation Time
Typical pour and finish on a 4-inch slab of this size requires a crew of 8–14 workers for a full day or two, depending on weather and site conditions. Labor costs usually dominate in tight markets and can shift based on form work complexity and curing requirements. A longer curing period can extend project duration and add scheduling costs.
Real-World Pricing Examples
Basic scenario: A simple 60×80 slab with 4-inch thickness, no rebar, broom finish, standard access. Specs: 4,800 sq ft, 59 cubic yards, minimal site prep. Labor 2 days, crew of 8, basic delivery. Total around $9,000 to $12,000.
Mid-Range scenario: Adds welded wire mesh, standard rebar grid, moderate site prep, and a light texture finish. Total around $25,000 to $30,000.
Premium scenario: Thickened edges, heavy reinforcement, stamp texture or decorative finish, additional slope work for drainage, and enhanced curing. Total around $40,000 to $60,000.
Understand the full scope and obtain line-item quotes to compare apples-to-apples when evaluating bids for a 60-by-80-foot concrete slab project. Distinct costs for materials, labor, and site work will shape final pricing, with regional differences and project specifics driving the most variance.