Bathroom cabinets cost can vary widely depending on size, material, and finish. This guide explains bathroom cabinets cost ranges, price factors, and budgeting tips for U.S. buyers.
Assuming a standard project in a typical home, the total bathroom cabinet cost often ranges from about $1,200 to $6,500, with vanities usually accounting for the largest portion. Per-unit pricing varies by stock vs. semi-custom vs. custom work, with base cabinets and wall cabinets priced separately and countertops or sinks influencing overall expense.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 24″ Base Cabinet (Stock) | $120 | $300 | $650 | Common starter unit; varies by finish/material |
| Wall Cabinet (12–24″) | $80 | $200 | $420 | Above-sink storage option; per unit |
| Vanity Set (60″ with countertop) | $500 | $1,100 | $2,000 | Includes countertop; assembled options vary |
| Hardware & Accessories | $20 | $70 | $200 | Soft-close hinges, pulls/knobs |
| Delivery & Disposal | $40 | $100 | $180 | Site delivery; packaging removal |
| Installation Labor | $150 | $360 | $1,000 | Professional install; varies by project |
Overview Of Costs
Stock options offer the lowest price while custom installs carry the highest cost. Typical bathroom cabinet projects balance price against quality and finish. For many homes, a complete cabinetry upgrade ranges from roughly $1,200 to $6,500, with vanity sets driving most of the expense. Per-unit costs vary: stock base cabinets may run $120-$650 each, while stock wall cabinets commonly cost $80-$420 per unit, and a full 60-inch vanity with countertop can run $500-$2,000 or more. Assumptions: standard bathroom size, midrange materials, and basic installation.
Assumptions: region, specs, labor hours.
Cost Breakdown
Breaking down what drives price helps set a realistic budget for bathroom cabinet projects. The following table presents a clear itemized view of typical cost components and their share of a midrange project. This breakdown can help compare quotes from different contractors or suppliers.
| Item | Materials | Labor | Equipment | Permits | Delivery/Disposal | Contingency |
|---|---|---|---|---|---|---|
| Cabinets & Finish Materials | $800–$2,000 | $0 | $0 | $0 | $0 | $0–$200 |
| Labor (Installation) | $0 | $500–$1,800 | $0 | $0 | $0 | $0 |
| Hardware & Accessories | $50–$250 | $0 | $0 | $0 | $0 | $0 |
| Delivery & Disposal | $0 | $0 | $0 | $0 | $60–$180 | $0 |
| Permits & Inspections | $0 | $0 | $0 | $0–$100 | $0 | $0 |
| Contingency | $0 | $0 | $0 | $0 | $0 | $100–$400 |
| Estimated Total | $1,510–$4,730 |
Assumptions: region, specs, labor hours.
Factors That Affect Price
Material type and construction method have the largest impact on cost. Solid wood construction or plywood boxes with solid panel doors significantly raise price versus MDF or particleboard boxes with vinyl or thermofoil finishes. Thresholds to watch include door style (Shaker vs. raised panel), finish (painted vs. stained vs. laminate), and hardware quality (standard hinges vs. soft-close). vanities and countertops add further cost: a standard 60″ vanity with laminate top is cheaper than a 60″ vanity with engineered stone countertop. Size matters as well: a 72″ vanity often adds several hundred to a few thousand dollars compared with a 60″ option.
- Materials quality: solid wood doors or plywood boxes typically add 20–40% compared with midrange MDF options.
- Construction method: frameless versus framed assemblies can shift costs by 5–15% on typical projects.
- Finish and color: high-end paints, veneers, or specialty finishes may add 10–25% more than standard finishes.
- Hardware: soft-close hinges and full-extension slides commonly add $15–$60 per cabinet.
- Vanity size and countertop: 60″ units are common; 72″ or double-width vanities can push total price higher by 15–30% depending on countertop material.
Ways To Save
Smart choices can significantly reduce bathroom cabinet costs without sacrificing function. Consider stocking inventory rather than custom orders, standard sizes, and simpler finishes. Purchasing flat-pack or ready-to-assemble cabinets often saves money, while hiring a pro for only the installation portion can cut labor costs if the cabinets arrive pre-assembled at the job site. Pairing stock cabinets with a minimal, durable countertop can also trim expenses.
Regional Price Differences
Prices vary by region due to labor markets, shipping, and local codes. The same cabinet package can cost more in high-cost areas and less in regions with lower living costs. In dense urban markets on the coasts, expect higher base prices and delivery fees, while inland or rural areas may offer more favorable rates. Typical three-region contrasts (rough ranges for a standard 60″ vanity with countertop) are summarized below.
- Northeast Urban: Base cabinets $150–$650; Vanity with countertop $1,000–$2,500; Delivery higher due to urban constraints.
- Midwest: Base cabinets $120–$650; Vanity with countertop $900–$2,000; Labor often competitive.
- West (non-coastal to coastal): Base cabinets $130–$700; Vanity with countertop $1,000–$2,200; Shipping can influence final cost.
Regional deltas can be roughly ±10–25% around a national average, with urban coastal markets at the higher end and more rural interiors toward the lower end. Regional planning should account for local taxes, permit costs, and the availability of installers.
Labor & Installation Time
Installation time varies with project scope and access, influencing total cost. A typical bathroom cabinet replacement with a single vanity and a couple of wall cabinets can take about 1–2 days for two installers, assuming existing plumbing does not require major modification. Labor rates typically range from $50 to $120 per hour, depending on region and crew expertise. The total labor hours often fall between 8 and 20 hours for a straightforward install, with more complex tasks potentially extending to 25–40 hours. data-formula=”labor_hours × hourly_rate”>
Key drivers for installation time include plumbing alterations, electrical work for lighting and outlets, and the need to modify walls or flooring to accommodate new cabinet footprints. A straightforward project with standard sizes, preassembled cabinets, and minimal adjustments is at the lower end of the time estimates; bespoke finishes or custom countertops push the timeline and cost higher.
Real-World Pricing Examples
Concrete scenario snapshots illustrate how choices affect total project price. Each card assumes a standard bathroom layout with a single vanity and a few wall cabinets, plus basic hardware and standard installation.
- Basic Scenario — Specs: stock 60″ vanity with laminate countertop, two 24″ base cabinets, two 12″ wall cabinets; Hardware: basic knobs; Labor: 8–12 hours; Per-unit prices: base $120–$300 each, wall $80–$200 each, vanity $500–$900; Total: about $1,600–$2,100.
- Mid-Range Scenario — Specs: plywood boxes with center-molded doors, painted finish, soft-close hardware; 60″ vanity with engineered stone countertop; Labor: 14–20 hours; Per-unit prices: base $250–$500 each, wall $150–$300 each, vanity $1,000–$2,000; Total: about $3,000–$5,000.
- Premium Scenario — Specs: custom cabinetry with solid wood frames, full-height panels, premium veneers, integrated lighting, and stone or quartz countertops; Labor: 20–40 hours; Per-unit prices: base $400–$700 each, wall $250–$400 each, vanity $2,000–$4,000; Total: about $6,000–$12,000.