Homeowners typically pay a broad range to add shower doors to a tub, with cost influenced by door style, glass thickness, tub opening size, and the complexity of installation. This guide provides practical pricing in USD, including low, average, and high ranges, plus key cost drivers and savings tips.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door System (Framed) | $350 | $600 | $1,050 | Basic framed kit for standard 60″ opening |
| Door System (Frameless) | $800 | $1,500 | $2,700 | Glass, hardware, and install for frameless panels |
| Delivery & Old-Door Removal | $15 | $50 | $150 | Variable by location and disposal needs |
| All-In Total Project | $1,100 | $1,900 | $3,250 | Includes materials, labor, and basic setup |
Assumptions: region, specs, labor hours.
Typical Cost Range
For most tubs, a basic framed door installation runs about $500-$1,200, while frameless glass doors commonly run $1,000-$3,000, including installation. Prices vary by region, door type, glass thickness, and whether existing trim must be modified.
Cost Breakdown
This table displays major cost components and typical ranges for a standard tub-door project. The figures assume a standard 60-inch opening and a single-door setup; larger openings or added hardware raise costs.
| Item | Materials | Labor | Equipment | Permits | Delivery/Disposal | Contingency |
|---|---|---|---|---|---|---|
| Basic Framed Door System | $350-$600 | $150-$400 | $0-$50 | $0-$20 | $15-$40 | $25-$60 |
| Frameless Glass Door System | $800-$1,500 | $400-$800 | $50-$150 | $0-$30 | $30-$60 | $60-$150 |
| Add-Ons & Upgrades | $50-$150 | $50-$150 | $0-$20 | $0-$20 | $0-$20 | $10-$40 |
Cost Drivers
The two largest price levers are door style and glass thickness. Frameless doors and thicker glass add substantial cost, while standard framed systems are the most budget-friendly. Other drivers include tub width, existing trim, and labor time.
- Door style: Framed doors are typically cheaper than frameless; a frameless system can add several hundred to thousands of dollars.
- Glass thickness: 1/4″ glass is cheaper; 3/8″ adds more, and 1/2″ often commands the top end of pricing.
- Opening width and height: Wider or taller openings increase materials and labor requirements; expect higher costs beyond 60″ openings by roughly $150-$400 for frames and $400-$1,000 for frameless.
- Existing surround and trim: If tile repair or trim modifications are needed, add $100-$500 depending on scope.
- Installation complexity: If derouting pipes, adjusting plumbing, or removing built-ins is required, labor can increase by 5-15 hours or more at regional rates.
Ways To Save
Smart planning and material choices can significantly reduce costs. Consider the following to trim price without sacrificing quality.
- Choose a framed door instead of frameless when possible.
- Reuse existing tracks or hardware if compatible with a new door system.
- Shop door kits during sales or promotions and request quotes from multiple local installers.
- Limit customizations, such as extra hardware, seals, or specialty finishes, to essential upgrades only.
- Schedule installation during off-peak seasons when contractors have more availability.
Regional Price Differences
Prices vary by market, with noticeable differences among regions. In practice, regional adjustments typically fall within these ranges relative to national averages:
- Northeast: typically 5%–15% higher than national averages due to labor costs and material availability.
- Midwest: often aligns with or slightly below national averages, about -5% to +5% depending on city and vendor.
- Southwest & West: generally near national averages, with possible increases of 0%–12% for frameless systems in high-cost metro areas.
Labor & Installation Time
Most installations fall within a handful of hours, with frameless doors needing more time. Typical installation durations and labor-rate ranges help shape the final price. See the shorthand below for planning:
- Framed door installation: roughly 2–4 hours in a standard tub opening; labor rate commonly $60–$110 per hour depending on region and contractor.
- Frameless door installation: roughly 4–6 hours; labor rate commonly $80–$120 per hour in many markets.
- Labor time notes: complex tile layouts, multiple cuts, or plumbing adjustments extend both time and cost.
Mini-labor cost formula: data-formula=”labor_hours × hourly_rate”> Use hours and local hourly rate to estimate total labor costs.
Additional & Hidden Costs
Hidden costs can surprise if not anticipated. Understanding potential extras helps prevent budget overruns and keeps the project on track.
- Removal of old door and disposal: typically $20–$80 per item, depending on location and disposal requirements.
- Tile or surround repairs: $150–$600 if sealant or tile work is needed after removing or installing the door.
- Sealants, finishes, and edge treatments: $20–$120, depending on the material and durability.
- Travel fees or minimum service charges: $0–$75 in some markets; check with local installers.
- Warranties or extended service plans: $50–$250, depending on coverage length and components.
Real-World Pricing Examples
Basic Scenario
Specs: Standard framed door, 60″ opening, basic hardware, 1/4″ tempered glass; 2–3 hours of labor. Estimated total: Materials $350–$500; Labor $150–$350; Hardware $20–$60; Delivery/Removal $15–$40; Total project range $530–$950.
Mid-Range Scenario
Specs: Frameless door, 60″ opening, 3/8″ tempered glass, mid-grade hardware; 3–5 hours of labor. Estimated total: Materials $1,000–$1,500; Labor $350–$650; Hardware $40–$90; Delivery/Removal $30–$60; Total project range $1,420–$2,300.
Premium Scenario
Specs: Frameless door, 72″ opening, 1/2″ or thicker glass, premium hardware, minor surround modifications; 6–8 hours of labor. Estimated total: Materials $1,800–$2,800; Labor $600–$1,200; Hardware $60–$150; Delivery/Removal $60–$120; Total project range $2,520–$4,270.