Homeowners typically pay a combined total per square foot for brick veneer installation that covers materials and labor, plus limited site adjustments. Cost drivers include brick type, wall height, complexity, and local labor rates. This article outlines price ranges in USD to help buyers estimate a project budget for brick veneer.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Brick veneer installed per sq ft | $11 | $16 | $22 | Includes materials and labor |
| Materials only per sq ft | $4 | $6.50 | $9 | Face brick or thin brick options |
| Labor per sq ft | $7 | $9.50 | $13 | Includes prep and setting |
| Project minimum (100 sq ft) | $1,100 | $1,600 | $2,200 | Small homes or accents |
| Delivery/Disposal | $60 | $2,00 | $4,00 | Depends on distance and debris |
Overview Of Costs
Brick veneer installed costs typically range from about 11 to 22 per square foot, with per unit components showing material costs around 4 to 9 per square foot and labor around 7 to 13 per square foot. Assumptions include standard exterior walls, full veneer panels, and no unusual structural work.
Two common pricing models exist: a total installed price per square foot and a component based estimate that separates materials and labor. The total installed price reflects project management and site prep, while the per unit breakdown clarifies where money goes during a typical installation.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $4 | $6.50 | $9 | Brick type and finish drive cost |
| Labor | $7 | $9.50 | $13 | Installation crew time |
| Equipment | $1 | $2 | $3 | Scaffolding and lifts |
| Permits | $0 | $0-$500 | $1,000 | Depends on jurisdiction |
| Delivery/Disposal | $60 | $200 | $400 | Brick and waste handling |
| Warranty | $0 | $100 | $300 | Material and craft coverage |
| Overhead | $0 | $1.50 | $3 | Project management |
| Contingency | $0 | $1.50 | $3 | Allow 5–10 of project |
Pricing Variables
Brick type and thickness affect cost significantly. Thin brick veneer is usually cheaper than full brick in materials yet may require different substrate prep. Exterior wall height and doorway or window openings add complexity that can increase labor time.
Wall complexity and supports such as ledges, protrusions, or curved surfaces increase labor hours and equipment rental time. Special patterns or custom corners add minor cost increments per square foot.
Regional differences also matter. Climate and local labor markets impact installed price, and shipping costs influence material pricing for remote locations.
Ways To Save
Choose standard brick finishes over premium or rare blends to lower material costs.
Shop multiple quotes and compare both total installed price and itemized components to identify value.
Schedule off season installations in milder months to potentially reduce labor demand and pricing volatility.
Regional Price Differences
Prices vary by region due to labor markets and material availability. In the Northeast, installed costs tend to be higher for labor and scaffolding. The Midwest often shows midrange pricing for materials, while the Southwest may see lower material transport costs but higher temperature related labor adjustments. Expect regional deltas around plus minus 10 to 20 percent from national averages depending on location and season.
Labor & Installation Time
Labor time scales with wall area and complexity. A straightforward exterior wall can require fewer crew hours than a textured pattern with multiple corners. Typical crews include a mason and helper, with additional labor for scaffolding setup and cleanup.
Labor hours estimate for 1,000 sq ft large flat wall is around 60–90 hours, with guidance to adjust for openings and substrate condition.
Additional & Hidden Costs
Hidden costs may include substrate repair, waterproofing, or sealant application at joints. Transport distance and fuel surcharges can add to delivery fees. If permits are required, processing time may affect scheduling and cost.
Hidden fees often show up as contingency allowances or extra days for weather delays that extend labor hours.
Real World Pricing Examples
Basic site has 800 sq ft of exterior wall, standard brick, no special patterns. Materials 5 per sq ft, labor 8 per sq ft, delivery 120, total around 9,920.
Mid Range 1,200 sq ft with a running bond pattern, standard brick, modest substrate work. Materials 6.5 per sq ft, labor 10 per sq ft, permits 600, delivery 250, total around 21,000.
Premium 1,500 sq ft with premium brick, curved sections and additional lintels. Materials 9 per sq ft, labor 13 per sq ft, delivery 400, permits 1,000, total around 30,000.