For a 12-yard concrete pour, buyers typically face costs shaped by material price, delivery, and site work. The price range depends on concrete strength, reinforcement, and forms. This guide presents clear cost estimates and practical saving tips.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Concrete (12 yd³, standard mix) | $1,680 | $2,040 | $2,520 | Assumes $140–$210/yd³ |
| Delivery | $320 | $450 | $600 | Fuel surcharge may apply |
| Reinforcement & Forms | $400 | $1,000 | $2,000 | Rebar, wire mesh, wooden forms |
| Labor & Finishing | $800 | $1,500 | $2,500 | Finishing, jointing, curing |
| Permits & Fees | $0 | $50 | $200 | Local requirements vary |
| Subtotal (before tax) | $3,200 | $5,040 | $7,820 | |
| Taxes & Overhead | $0 | $150 | $400 | State/local taxes |
| Total Estimated | $3,200 | $5,190 | $8,220 | Includes 12 yd³ concrete, delivery, and core work |
Assumptions: region, mix strength (e.g., 3000–4000 psi), site access, and curing requirements.
Overview Of Costs
Typical project ranges for a 12-yard concrete pour cover material, delivery, and basic site work. The total price generally spans from the low end around $3,200 to a high near $8,200, depending on concrete strength, reinforcement, forms, and labor demands. Per-cubic-yard estimates commonly fall between $140 and $210, with delivery and finishing adding several hundred dollars.
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $1,680 | $2,040 | $2,520 | Concrete mix, additives |
| Labor | $800 | $1,500 | $2,500 | Pouring crew, finishing |
| Equipment | $100 | $300 | $600 | Tools, small mixer |
| Delivery | $320 | $450 | $600 | Truck + fuel surcharge |
| Reinforcement | $400 | $1,000 | $2,000 | Rebar or mesh |
| Permits | $0 | $50 | $200 | Location dependent |
| Taxes & Overhead | $0 | $150 | $400 | Regional variations |
| Total | $3,200 | $5,190 | $8,220 | All-inclusive estimate |
data-formula=”labor_hours × hourly_rate”>Assumptions: 12 yd³ pour, level surface, standard compaction, and proper curing.
What Drives Price
Concrete strength, yardage, and site access largely shape cost. Higher-strength mixes (eg, 4000 psi) raise material costs. Larger or irregular pours incur more labor and forms. Easy site access reduces equipment time and mobilization fees, while restricted access can add setup time and additional personnel.
Ways To Save
Plan for off-peak scheduling and optimize reinforcement choices. Savings can come from batching concrete at the supplier’s plant, selecting standard slump mixes, and coordinating the pour with neighboring projects to reduce mobilization costs. Consider replacing steel reinforcement with wire mesh where appropriate and batching multiple small pours into a single day where feasible.
Regional Price Differences
Prices vary by region due to labor markets and material costs. In the West, higher delivery fees can push totals up by 5–12% relative to the Midwest. In urban coastal zones, permit fees and access constraints may add 3–8% more. Rural areas often see lower labor rates but longer travel times that shift delivery charges.
Labor, Hours & Rates
Labor costs depend on crew size and time. A typical crew might include a supervisor, two to four workers, and finishers. For 12 yd³, labor hours commonly range from 4 to 10 hours, with per-hour rates from $60 to $120 depending on region and demand. Local unions, permits, and overtime rules can influence totals significantly.
Real-World Pricing Examples
Basic Scenario: 12 yd³ standard concrete, no extra reinforcement, standard forms. 6 hours of labor, standard delivery. Total: around $3,200–$3,800.
Mid-Range Scenario: 12 yd³ concrete with moderate reinforcement and mild site prep. 8 hours labor, delivery with surcharge. Total: around $4,800–$6,000.
Premium Scenario: 12 yd³ high-strength mix (4000 psi), full reinforcement, complex forms, and expedited curing. 10–12 hours labor, premium delivery. Total: around $6,500–$8,200.
Assumptions: region, specs, labor hours.