The cost of Apollo concrete coatings in the United States typically ranges from modest to premium based on surface area, coating type, and preparation work. This article covers price estimates, factors, and budgeting tips to help buyers plan with confidence, including exact cost and price ranges.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Coating Material | $2.50/sq ft | $4.00/sq ft | $7.50/sq ft | Epoxy or polyurethane systems vary by chemistry |
| Labor & Installation | $1.50/sq ft | $2.50/sq ft | $4.00/sq ft | Includes surface prep and curing time |
| Surface Prep | $0.60-$1.20/sq ft | $0.90-$2.00/sq ft | $3.00+/sq ft | Crack repair, lifting, or grinding may raise cost |
| Sealers & Topcoats | $0.30-$0.70/sq ft | $0.60-$1.20/sq ft | $2.00+/sq ft | Additional layers for UV and chemical resistance |
| Other Costs | $100-$300 | $300-$800 | $1,500+ | Permits, disposal, and waste handling |
Assumptions: region, coating type, surface condition, and labor hours.
Overview Of Costs
Typical project ranges show total project costs and per-unit pricing. For a standard two-car garage (approximately 400–450 sq ft) using a mid-range epoxy system, total costs commonly fall in the $2,000 to $5,000 band, with per-square-foot pricing near $4 to $6.50. Higher-end, chemical-resistant systems or extensive surface prep can push the total well beyond $6,000.
Per-unit pricing matters for budgeting. Expect material costs around $3.50 to $6.50 per sq ft and labor around $2 to $4 per sq ft, depending on the coat thickness, number of coatings, and preparation complexity.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.50/sq ft | $4.00/sq ft | $7.50+/sq ft | Includes base epoxy or polyurea systems |
| Labor | $1.50/sq ft | $2.50/sq ft | $4.00/sq ft | Labor hours depend on readiness and coating complexity |
| Preparation | $0.60-$1.20/sq ft | $0.90-$2.00/sq ft | $3.00+/sq ft | Crack repair, moisture mitigation, grind time |
| Permits | $0 | $50-$150 | $300 | Local requirements |
| Delivery/Disposal | $0-$20 | $50-$120 | $300 | Disposal of waste, packaging |
| Warranty | $0 | $50-$150 | $500 | Limited coverage may vary by system |
| Taxes | $0-$20 | $40-$100 | $200 | Based on local rate |
data-formula=”labor_hours × hourly_rate”> Assumptions: region, surface condition, and coating system selection.
What Drives Price
Pricing hinges on coating type, surface area, and prep quality. A basic epoxy typically costs less than fiber-reinforced or polyaspartic systems. Larger areas increase material and labor costs nonlinearly, and poor prep adds costly remediation later. A garage floor with cracks or moisture issues requires more time and materials.
Key pricing drivers include coating thickness (mil), cure time, and UV resistance requirements. For commercial spaces, higher abrasion resistance and chemical tolerance raise both material and labor costs. Higher-end systems may include color flecks or decorative finishes that add to per-square-foot pricing.
Ways To Save
Budget-conscious buyers can lower upfront costs with phased applications or simpler finishes. Choosing a mid-range epoxy over a specialty system, refining surface prep to reduce grind time, and bundling multiple spaces in a single project can yield savings. Seasonal scheduling and advance booking sometimes unlock lower labor rates in off-peak periods.
Cost control also comes from accurate area measurement, avoiding changes mid-project, and selecting warranties aligned with expected use. If a space has unusual dimensions, request a measured estimate to prevent surprises later.
Regional Price Differences
Prices vary by region due to labor markets and material availability. In the Northeast, expect higher installation costs than the Southwest due to wage levels and regulatory requirements. Urban markets can be 10–20% higher than suburban areas, while rural regions may be 5–15% lower on average. Regional shortages of certain resin systems can briefly drive up material costs by 5–10% in tight markets.
Labor & Installation Time
Labor time directly affects total cost and project duration. Typical garage floor installations take 1–2 days for prep and coating, with curing times extending the project by 2–3 more days for walkable readiness. Complex prep, crack repair, or large commercial spaces can add 1–2 extra days. Labor rates commonly range from $1.80 to $3.50 per sq ft, depending on region and crew qualifications.
Consider a span for scheduling: the more surfaces and the thicker the coating, the longer the cure window and the higher the cost due to labor and equipment use. A small residential project will generally be at the lower end of the range, while a large industrial floor reaches the upper end.
Real-World Pricing Examples
Three scenario cards illustrate typical quotes with varying scopes.
Basic: 300 sq ft Garage
Coating: standard epoxy, minimal prep, single coat
Labor: 3–4 hours
Materials: $1,200
Labor: $900
Total: $2,100–$2,400
Mid-Range: 600 sq ft Shop
Coating: epoxy with gradual color specks, moderate prep
Labor: 1–2 days
Materials: $2,600
Labor: $1,400
Total: $4,000–$6,000
Premium: 1,000 sq ft Warehouse
Coating: polyurea/polyaspartic dual system, extensive prep
Labor: 2–3 days
Materials: $5,000
Labor: $4,000
Total: $9,000–$12,000
Assumptions: region, specs, labor hours.
Price By Region
Regional deltas typically range from -10% to +15% around the national average. For example, a mid-range 500 sq ft coating project might be $3,000 in a mid-Atlantic market, $2,700 in the Sun Belt, and $3,450 in a Northeast metro, reflecting local labor costs and material availability.
Additional & Hidden Costs
Hidden items can shift the final invoice. Surprises include moisture mitigation, extra crack repair, disposal fees, and extended curing times. Some projects incur a one-time cleanup or disposal surcharge, and coatings may require maintenance coatings sooner than anticipated in high-traffic environments. Always request a scoped estimate with explicit line items to avoid surprise charges.
Real-World Pricing Snapshots
Three real-world style snapshots provide typical quotes by project type.
-
Residential Floor 350–420 sq ft garage, standard epoxy, moderate prep.
- Materials: $1,400–$1,800
- Labor: $800–$1,400
- Prep/Sealing: $400–$700
- Total: $2,600–$3,900
-
Small Commercial Room 500–600 sq ft, epoxy with color flecks, good prep.
- Materials: $2,000–$2,800
- Labor: $1,300–$2,200
- Prep/Disposal: $400–$900
- Total: $3,700–$5,900
-
Industrial Floor 1,200–1,500 sq ft, polyurea, extensive prep.
- Materials: $6,000–$9,000
- Labor: $4,000–$6,000
- Prep/Permits: $1,000–$2,500
- Total: $11,000–$17,500