The cost to replace a GE dishwasher control board typically includes a new part, labor, and minor related expenses. Price ranges depend on the board model, diagnostic time, and whether additional components are required. Understanding the cost helps buyers plan budgets and compare estimates.
Assumptions: region, specs, labor hours.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| GE Control Board | $70 | $150 | $260 | OEM or reputable aftermarket parts |
| Labor | $120 | $190 | $250 | Typical service window; varies by access and diagnostics |
| Diagnostics & Trip Charge | $0 | $40 | $80 | Often included in labor or billed separately |
| Delivery/Return (if needed) | $0 | $15 | $30 | Part availability affects cost |
| Taxes & Misc | $0 | $5 | $20 | Applicable in some regions |
Overview Of Costs
Typical project ranges combine the part, labor, and minor ancillary charges. A straightforward swap often lands in the $290-$520 range, while complex installations can reach $600 or more. For quick reference, the per-unit price for the control board itself commonly spans $70-$260, with labor driving the majority of the total in many markets.
Cost Breakdown
| Category | Low | Average | High | Explanation | Itemized Notes |
|---|---|---|---|---|---|
| Materials | $70 | $150 | $260 | Control board and basic connectors | OEM vs. aftermarket; compatibility matters |
| Labor | $120 | $190 | $250 | On-site replacement and testing | Access, dishwasher model, error codes |
| Equipment | $0 | $20 | $40 | Special tools or diagnostic devices | Small tools typically included in service call |
| Permits | $0 | $0 | $0 | Permits not usually required for residential repairs | Regional rules may vary |
| Delivery/Disposal | $0 | $15 | $30 | Return or disposal of old parts | Shop vs. field service differences |
| Warranty | $0 | $0 | $0 | Parts warranty typically applies | Check manufacturer terms |
| Contingency | $0 | $15 | $40 | Unforeseen issues | Door seals, wiring harness checks |
data-formula=”labor_hours × hourly_rate”>
Pricing Variables
Sorter of price drivers includes the GE dishwasher model line (standard vs. Profile vs. Ultra), whether a wiring harness or sensor module must be replaced, and the total diagnostic time. A basic replacement for a common model without extra parts may stay near the low end, while high-efficiency or high-end models with extended harnesses push toward the high end.
Regional Price Differences
Prices vary by region due to labor rates and parts availability. In the Midwest, expect middle-range totals near the national average. In the Northeast, higher labor costs can lift totals by roughly 5–15%. In rural areas, travel time and per-visit charges may add 5–10% to the overall price.
Labor, Hours & Rates
Typical install time ranges from 1.5 to 3 hours for a straightforward board swap, with 3–5 hours for complex layouts or difficult access. Labor rates commonly fall between $60-$120 per hour, depending on the technician and market. A formula example is below: data-formula=”labor_hours × hourly_rate”>
Additional & Hidden Costs
Hidden costs can include diagnostic fees if confirmed non-warranty, expedited service surcharges, and tax on parts. Some outfits bill a flat diagnostic fee plus credit toward the replacement if approved. Always confirm whether the quote includes diagnostic time and disposal of the old board.
Real-World Pricing Examples
Scenario Cards
Basic—GE dishwasher, standard control board, no extra parts: Parts $70, Labor $120, Diagnostics $0; Total $190-$210.
Mid-Range—Board with minor harness replacement, standard model: Parts $150, Labor $180, Delivery $15; Total $345-$380.
Premium—High-end model, multiple sensors and extended harness, added components: Parts $260, Labor $230, Delivery $30, Taxes $20; Total $540-$570.