What buyers typically pay for Cambria quartz countertops includes material, fabrication, and installation. The main cost drivers are slab quality, edge profile, surface finish, kitchen size, and labor time for measurement, cutting, and installation. This article provides cost ranges, per-unit prices, and practical budgeting guidance for U.S. buyers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cambria quartz material (per sq ft) | $28 | $40 | $60 | Retail pricing varies by color/collection. |
| Fabrication & edge work (per sq ft) | $12 | $20 | $40 | Includes cutting, edge profiles, and seams. |
| Labor & installation (per sq ft) | $20 | $30 | $50 | Includes removal of old countertops on most projects. |
| Delivery & handling (flat) | $50 | $120 | $200 | Distance from supplier to home affects price. |
| Remodel-related materials | $0 | $200 | $800 | Adhesives, sealants, and edge accents. |
| Permits, if required | $0 | $50 | $150 | Typically not required for simple installations. |
Overview Of Costs
Cambria countertop costs vary by project size and options. Typical installations for a standard 30–40 square foot kitchen fall in the range of $2,000 to $6,000 installed. On a per-square-foot basis, expect about $60 to $110 for most colors and profiles. Assumptions: standard 3 cm slabs, common edge profiles, straightforward layout, and no major plumbing or cabinet changes. The total price combines material, fabrication, labor, and delivery, with extras for specialty edges or large islands.
Cost Breakdown
The table below shows how a Cambria countertop project may assemble financially. Estimates assume a mid-sized kitchen, standard 3 cm slabs, and typical edge profiles.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $1,100 | $2,000 | $3,000 | Based on $28–$40/sq ft for 40 sq ft. |
| Labor & Installation | $600 | $1,200 | $2,000 | Includes measurement, cutting, and set in place. |
| Fabrication & Edges | $480 | $800 | $1,600 | Common edge profiles like eased, mitred, or bevel. |
| Delivery/Removal | $50 | $120 | $200 | Delivery distance affects cost. |
| Permits & Misc. | $0 | $50 | $150 | Occasional permitting or special hardware. |
Assumptions: region, specs, labor hours.
What Drives Price
Material price tiers, edge details, and installation complexity drive total cost. Cambria color families with rare patterns command higher material pricing, while edge profiles such as full bullnose or mitered corners raise fabrication time and costs.Island features, sink cutouts, and under-mount appliances add layers of labor and potential delivery fees. Per-unit costs are sensitive to kitchen size; larger areas dilute labor costs per square foot but increase total material use.
Ways To Save
Budget-conscious shoppers can lower costs without sacrificing quality. Choose standard edge profiles and colors with strong resale appeal. Plan layout to minimize seams and waste, and schedule installation during off-peak periods to reduce labor charges. Consider combining projects with adjacent remodels to optimize delivery and crew time. When feasible, request a single quote that itemizes materials, fabrication, and installation.
Regional Price Differences
Pricing for Cambria countertops can vary by region due to labor markets and delivery distances. In the Northeast, total installed costs often run higher because of urban labor rates, while the Midwest may show mid-range totals. The South and Mountain states frequently present lower per-square-foot averages, but regional supply and travel charges may offset these savings. As a rule, expect regional deltas of approximately ±15% to ±25% compared with national averages.
Real-World Pricing Examples
The following scenario cards illustrate common project profiles and prices. Each card assumes Cambria material and standard installation practices, with modest variations in size and edge work.
Basic Scenario
Size: 28 sq ft; Edge: simple edge; Islands: none. labor hours: ~15. Total: $1,800–$2,600. Per sq ft: $64–$93.
Mid-Range Scenario
Size: 40 sq ft; Edge: eased edge; Islands: small island. labor hours: ~22. Total: $2,800–$4,200. Per sq ft: $70–$105.
Premium Scenario
Size: 50 sq ft; Edge: full bullnose; Color: high-end pattern; Additional seams or complex layout. labor hours: ~30. Total: $4,200–$6,000. Per sq ft: $84–$120.
Assumptions: region, specs, labor hours.
Pricing FAQ
Typical questions include: Is Cambria more expensive than other quartz brands? How does color choice affect cost? Do I need a special installer for Cambria? In most cases, Cambria is competitively priced within premium quartz categories, with price differences driven mainly by color, edge, and island complexity rather than material necessity.