Buyers often pay for framing, drywall, insulation, doors, and finish work when installing an interior wall with a door. Typical price drivers include wall size, door type, material choices, and labor rates. The following cost overview summarizes what to expect for a standard interior wall with a single passage door.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Wall Framing (wood studs, standard 4×8 or 4×9 layout) | $350 | $1,200 | $2,600 | Includes studs, top/bottom plates, and blocking for the door |
| Drywall (1/2″ standard) | $300 | $1,300 | $2,400 | Finish and sanding may vary by texture |
| Door Assembly (pre-hung interior door) | $150 | $450 | $900 | Includes frame and basic hardware |
| Finishes & Paint | $100 | $600 | $1,200 | Primer, color coats, and touch-ups |
| Insulation (optional) | $40 | $120 | $360 | R-13 or comparable for sound/temperature control |
| Labor (carpentry, drywall, doors) | $600 | $2,000 | $4,000 | Varies by site access, crew size, and region |
| Permits (if required) | $0 | $200 | $600 | Check local rules |
| Delivery/Disposal | $20 | $120 | $350 | Materials handling and waste removal |
| Contingency (unexpected work) | $50 | $200 | $600 | Typically 5–15% of project |
Assumptions: region, wall length, door size, finish level, and crew hours.
Overview Of Costs
Cost ranges reflect typical mid-size projects in residential spaces with a standard interior door (6’8″ or 80 in tall, hollow-core). This section provides totals and per-unit references to help compare options across materials and finishes. For a basic setup, expect the structure with a standard 32″ door to fall in the lower portion of the range; for higher-end doors and thicker drywall or added insulation, costs climb toward the upper end.
Assumptions: interior partition, single doorway, standard ceiling height, suburban market.
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $350 | $1,100 | $2,300 | Includes drywall, studs, fasteners, door frame |
| Labor | $600 | $2,000 | $4,000 | Includes framing, drywall finishing, and door install |
| Equipment | $60 | $260 | $600 | Tools, ladders, misc. rental if needed |
| Permits | $0 | $200 | $600 | Local jurisdiction dependent |
| Delivery/Disposal | $20 | $120 | $350 | Material transport and debris removal |
| Warranty | $0 | $80 | $200 | Limited contractor warranty |
| Overhead & Profit | $0 | $150 | $500 | Contractor markup |
| Taxes | $0 | $100 | $250 | State and local taxes |
data-formula=”labor_hours × hourly_rate”>
What Drives Price
Door type and size are major cost drivers. Hollow-core interior doors are cheaper than solid or engineered options. Wall height, stud spacing (16″ on center standard; 24″ on high-load areas), and drywall thickness (1/2″ versus 5/8″) also influence price. For sound control, add insulated studs or thicker drywall, which adds material and labor time.
Cost By Region
Regional differences matter for labor rates and material access. In the Northeast, expect higher labor and permit costs; the Midwest tends to be lower; the West can be variable depending on urban density. Typical regional deltas run roughly ±15–30% from the national average for similar work.
Labor, Hours & Rates
Most interior wall with a door project runs 1.5–3.5 days for a small to mid-sized room. Labor rates commonly range from $40 to $90 per hour for carpenters, with higher rates for licensed trades in high-cost markets. For a 120–180 sq ft wall, expect 12–40 hours of labor depending on complexity and finishing level.
Regional Price Differences
Three illustrative markets show how prices vary by region. In Urban areas, higher permit, disposal, and labor costs push totals higher. Suburban markets typically fall in the middle, while Rural regions may see lower labor but higher material transport costs. Below are typical deltas to expect in dollars or percentage terms.
- Urban: +15–25% above national average for similar work
- Suburban: near national average with minor variations
- Rural: -10–20% below urban levels, depending on access and crews
Additional & Hidden Costs
Hidden costs can appear if the room requires redirects or unusual framing. Special door hardware, weatherproofing for unfinished spaces, and added soundproofing can add to the total. If walls are load bearing or require fire-rated assemblies, expect higher material and labor costs. Hidden moisture or asbestos concerns must be assessed before drywall removal or new installation.
Real-World Pricing Examples
Three scenario cards illustrate typical quotes for a small interior wall with a door.
Basic
Spec: 8 ft long wall, hollow-core 30″ door, standard drywall finish. Labor 12 hours, materials modest. Total: $1,200–$2,000. Per-square-foot estimate: $12–$22.
Mid-Range
Spec: 12 ft wall, 32″ pre-hung door, 1/2″ drywall, standard paint. Labor 22–28 hours. Total: $2,000–$3,800. Per-square-foot: $16–$28.
Premium
Spec: 16 ft wall, 36″ solid-core or pre-finished door, 5/8″ drywall, sound insulation, textured finish. Labor 30–40 hours. Total: $4,000–$7,000. Per-square-foot: $28–$40.