The price to install a range hood is largely driven by labor time, ducting complexity, electrical work, and the homeowner’s existing setup. Expect most projects to fall within a broad range depending on hood type, ceiling height, and local rates. This guide presents cost estimates and practical pricing for U.S. buyers, with focus on labor costs and related price drivers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Labor only (installation) | $150 | $450 | $1,000 | Typical labor for standard wall mounted, ducted hood |
| Electrical work | $150 | $350 | $800 | Outlets, wiring, switches as needed |
| Ducting & venting materials | $100 | $300 | $800 | Metal duct, elbows, caps |
| Permits & inspections | $0 | $100 | $300 | Depends on jurisdiction |
| Disposal & clean-up | $25 | $75 | $200 | Old hood and scraps |
| Total project (labor + materials) | $525 | $1,275 | $3,100 | Assumes standard hood and ducting |
Overview Of Costs
Typical project ranges reflect labor time, hood type, and ducting complexity. For a standard recirculating or vented wall-mount hood, labor hours usually fall between 3–8 hours, with electrical and ducting shaping the final bill. Assumptions: region, specs, labor hours.
Cost Breakdown
Costs come from several components that add up beyond the hood price. The table below shows how labor and related items contribute to a full installation estimate.
| Category | Low | Average | High | Notes | Index |
|---|---|---|---|---|---|
| Materials | $0 | $0 | $0 | Hood price not included here | |
| Labor | $150 | $450 | $1,000 | Time to mount, connect wiring, vent | |
| Equipment | $0 | $0 | $0 | Ladders, drills, safety gear | |
| Permits | $0 | $100 | $300 | Varies by city and scope | |
| Delivery/Removal | $0 | $50 | $150 | Transport of hood, disposal of old unit | |
| Warranty & Aftercare | $0 | $50 | $150 | Labor-only warranty assumptions | |
| Overhead & Profit | $0 | $100 | $300 | Contractor margin | |
| Taxes | $0 | $30 | $120 | Sales tax based on location |
data-formula=’labor_hours × hourly_rate’>
What Drives Price
Price is mainly affected by hood type, ducting route, and electrical requirements. A simple under-cabinet or wall-mount hood with short, straight ducting tends to cost less than a remote blower with long ducts or high static pressure requirements. Critical drivers include ceiling height, wall material, and whether new wiring or a dedicated circuit is needed. Complex installations may demand additional time for cutting, patching, or drywall work.
Ways To Save
Putting a few practical steps into place can reduce labor and total cost. ConsiderStandard ducting and a common hood size (30–36 inches) to limit installation complexity. If electrical work is minor or existing wiring is adequate, avoid extra conduit or circuit upgrades. Scheduling during regional off-peak times can shave costs, and choosing reputable, local installers may yield lower hourly rates without sacrificing quality. When feasible, select a hood that uses existing venting to minimize ductwork.
Regional Price Differences
Prices vary by region due to labor markets and permit costs. In the Northeast urban centers, labor rates often run higher than the national average. Suburban markets typically show mid-range pricing, while rural areas may be more affordable though availability can differ. Expect labor rates to differ by up to ±20–35% across these markets, with local code requirements also impacting the final number.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes under common conditions.
-
Basic — 30″ wall-mount hood, simple ducting, existing circuit. Specifications: standard hood, 6 ft ceiling, no ceiling modification. Hours: 3–4. Per-unit: $150–$450 labor; materials/permits: $0–$100. Total: $525–$1,000. Assumptions: standard hood size, single-story kitchen.
-
Mid-Range — 36″ hood with short duct, new outlet on dedicated circuit. Hours: 4–6. Per-unit: $250–$600 labor; electrical: $150–$350; permits: $0–$150. Total: $1,000–$1,750. Assumptions: standard duct path, local permit where required.
-
Premium — 42″ or larger hood, long duct run with elbows, remote blower, drywall work. Hours: 6–9. Per-unit: $450–$1,000 labor; ducting: $200–$600; electrical: $300–$500; permits: $100–$300. Total: $2,000–$3,100. Assumptions: multi-story residence, angled ceiling, high-efficiency hood.