Typical stove installation costs at Lowes or similar retailers involve a mix of delivery, haul-away, and professional hookup. Main drivers include stove type, required electrical or gas work, and the complexity of routing utilities. This article provides cost ranges in USD, with clear low–average–high estimates and per-unit insights for budgeting.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Delivery | $50 | $100 | $250 | Distance and stairs affect price |
| Unboxing & setup | $0 | $50 | $100 | Typically included if installed |
| Electrical work | $100 | $300 | $800 | Needed for electric ranges or upgrades |
| Gas hookup | $150 | $400 | $1,200 | Required for gas stoves; permits may apply |
| Vent hood/distance run | $100 | $350 | $900 | Includes ductwork and wall cap |
| Permits & inspections | $0 | $75 | $250 | Depends on local rules |
| Haul-away of old unit | $20 | $60 | $180 | Per item; some promos waive fee |
| Total project | $320 | $1,165 | $3,580 | Ranges by stove type & scope |
Overview Of Costs
Total project ranges for installing a stove through a major retailer like Lowes typically span from about $320 to $3,600, with many standard electric stoves landing in the $800–$1,600 range including delivery and basic hookup. For gas stoves, the range broadens to roughly $1,000–$3,600 due to gas line work and potential permit needs. Per-unit scales include $50–$250 for delivery per unit and $150–$800 for electrical or gas hookups, depending on existing utilities. Assumptions: region, stove type, and required permissions.
Cost Breakdown
Below is a table of common cost components for stove installation:
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $0 | $0–$50 | $150 | Power cords, adapters, vent parts |
| Labor | $100 | $250–$500 | $1,000 | Includes installation time and basic calibration |
| Electrical / Gas Work | $100 | $300–$600 | $1,000 | Code-compliant hookups |
| Permits | $0 | $75 | $250 | Local code requirements |
| Delivery & Haul-Away | $50 | $60–$150 | $250 | One-time service |
| Vent/Duct & Installation | $100 | $250–$500 | $900 | Escape routes and ductwork |
Factors That Affect Price
Key price drivers include stove type, existing utility readiness, and installation complexity. Electric ranges usually require basic wiring and a dedicated circuit, while gas ranges demand gas line work and potentially a vent hood with ducting. The length of the run from the stove to the electrical panel or gas shutoff, plus any necessary cabinetry adjustments, can push costs up. Regional labor rates and the need for permits vary by municipality, impacting total estimates.
Ways To Save
Plan ahead and bundle services where possible to reduce costs. Ask about in-store promotions, delivery windows, and whether haul-away of the old unit is included. If existing utilities already align with the new stove’s requirements, the installation cost can drop significantly. Scheduling during off-peak times or in-store promotions can also lower the average price.
Regional Price Differences
Prices vary by region due to labor markets and permit costs. In the Northeast urban markets, total project estimates tend to sit higher, roughly 10–20% above national averages. In the Midwest suburban areas, costs often align with the national average or slightly below. In rural or Western regions, travel fees and contractor availability can widen the spread by 5–15%. These deltas reflect typical ranges for delivery, labor, and permit requirements.
Labor, Hours & Rates
Labor time is typically 1–4 hours for electric installs and 3–8 hours for gas or complex venting. Rates commonly range from $80 to $150 per hour depending on region and contractor expertise. For a basic electric stove install, expect 1–2 hours of labor; for gas hookup with venting, qualify for 4–6 hours. A calculator-style guideline: labor hours × hourly rate yields a significant portion of the total cost, especially for gas conversions or custom cabinet work.
Additional & Hidden Costs
Potential extras include wiring upgrades, breaker panel checks, or wall alterations. Some stores require a permit if local codes demand it, which can add to the total. Accessories like anti-tip brackets or anti-gravity stoppers may incur small fees. If stairs, narrow hallways, or elevator access are involved, delivery and setup fees can rise. Always verify what is included in the quoted price to avoid surprises.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes under common conditions.
-
Basic Electric Install — Electric range, no venting changes, standard delivery.
- Assumptions: single-story home, new circuit or existing 240V outlet
- Labor: 1.5–2 hours; Rate: $90–$120/hr
- Totals: Delivery $60; Labor $180; Electrical $150; Total $390–$540
-
Mid-Range Gas Upgrade — Gas range, simple vent hood, minor cabinet adjustment.
- Assumptions: existing gas line, 30–40 ft run
- Labor: 4–6 hours; Rate: $100–$130/hr
- Totals: Delivery $100; Gas Hookup $350; Vent $350; Labor $420–$780; Permits $60–$150
- Assumptions: region, specs, labor hours.
- Total: $1,280–$2,090
-
Premium Installation With Full Venting — High-end range, custom cabinet work, ducting to exterior.
- Assumptions: multi-story with long vent run, high-end hood
- Labor: 6–8 hours; Rate: $120–$150/hr
- Totals: Delivery $150; Vent & Duct $800; Electrical $600; Labor $720–$1,200; Permits $100
- Total: $2,370–$2,900
Assumptions: region, specs, labor hours.