Homeowners typically pay for longboard aluminum siding based on panel length, thickness, and finish quality. Main cost drivers include material grade, labor for installation, and any underlayment or trim work required. This guide outlines price ranges and common factors to help set a budget for projects of varying sizes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material (longboard Aluminum Panels) | $2.50 | $4.20 | $6.50 | Per sq ft; includes mid-grade finishes |
| Material (Total Installed) | $3,000 | $6,500 | $11,000 | Assumes 1,500 sq ft house |
| Labor | $1.50 | $3.00 | $5.50 | Per sq ft; crew of 2–3 |
| Fasteners & Trim | $300 | $900 | $1,800 | Includes corner trims and starter strips |
| Underlayment & Weather Barrier | $200 | $600 | $1,200 | |
| Permits & Inspections | $0 | $300 | $1,000 | Depends on jurisdiction |
| Delivery / Handling | $100 | $350 | $700 | |
| Warranty (Limited) | $0 | $150 | $400 | |
| Contingency | $0 | $500 | $1,500 |
Overview Of Costs
Cost estimates for longboard aluminum siding usually span a broad range. The total project commonly runs from about $4,000 to $14,000, depending on house size and chosen finish. A mid-range project often lands near $6,500–$9,000 for 1,200–2,000 sq ft with standard finishes. For premium materials and complex rooflines, costs can exceed $12,000. Assumptions: region, house size, and labor hours influence the spread.
Assumptions: region, specs, labor hours.
Cost Breakdown
The cost breakdown below uses a table format with typical columns and demonstrates how expenses accumulate. The figures below reflect installed pricing and include some common regional adjustments.
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Overhead | Taxes | Contingency |
|---|---|---|---|---|---|---|---|---|
| $3,000–$11,000 | $1,500–$5,000 | $200–$1,200 | $0–$1,000 | $100–$700 | $0–$400 | $400–$1,000 | $0–$1,500 | $0–$1,500 |
What Drives Price
Price is impacted by several factors beyond basic material choice. Panel thickness and profile affect both durability and price. Higher gauge aluminum or thicker panels resist denting but cost more. Finish quality—for example, powder-coated or anodized finishes—adds to the cost but improves longevity. Roofing or siding complexity, such as multi-story sections, gables, or irregular angles, also raises labor time and expenses.
Regional Price Differences
Prices vary by region due to labor rates and material transport. In the Northeast, installed costs may run 5–10% higher than the national average. The Midwest often shows mid-range pricing with occasional regional promos. In the South and Southwest, milder climates can lower some weather-related labor overhead, but shipping costs for materials may offset this.
Labor, Hours & Rates
Labor is typically charged by the square foot or by the hour. A two- to three-person crew commonly works 8–12 hours for a mid-size home, translating to a per-square-foot rate of roughly $1.50–$5.50 depending on local wages and crew efficiency. Labor hours increase with complex trim, windows, and door openings or difficult access.
Extra & Hidden Costs
Hidden costs can include scaffolding or ladders for multi-story homes, disposal fees for old siding, and internal damage repair discovered during removal. If existing sheathing requires replacement, budget an extra 10–20% for materials and labor. Seasonal demand can also push prices higher in peak remodeling months.
Ways To Save
To reduce overall expense, consider some practical options. Choose standard finishes rather than premium textures, align installation with off-peak seasons, and obtain multiple quotes to compare labor rates. A project staged over multiple weekends may also reduce labor bottlenecks and allow price negotiation on materials. Request itemized estimates to identify where savings can be applied.
Real-World Pricing Examples
Three scenario cards illustrate typical project ranges with varying specifications. All scenarios assume an existing wall with clean sheathing and standard windows; prices reflect installed work in a suburban U.S. market.
Basic — 1,200 sq ft, standard 0.032–0.040 in thick aluminum panels, standard finish, minimal trim. Labor: 9–12 hours; Materials: $4,000–$6,000; Total: $6,000–$9,000.
Mid-Range — 1,500 sq ft, mid-grade finish, added corner trims, weather barrier. Labor: 12–16 hours; Materials: $6,000–$9,000; Total: $9,500–$12,500.
Premium — 2,000 sq ft, premium powder coat, custom flashing, roofline complexity, higher-grade aluminum. Labor: 16–24 hours; Materials: $9,000–$11,000; Total: $14,000–$20,000.
Labor hours × hourly_rate