Buyers typically pay for LP SmartSide board and batten siding by materials and installed price. Key cost drivers include material grade, square footage, labor rates, and local permitting or disposal fees. This article outlines cost ranges in USD and ≈ per-unit estimates to help plan a project budget.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material (LP SmartSide Board & Batten) | $1.80 | $3.20 | $5.50 | Typical siding panels; does not include installation |
| Labor & Installation | $3.50 | $6.50 | $10.50 | Includes prep, fastening, and basic finish |
| Trim & Accessories | $0.40 | $1.20 | $3.00 | J-channels, corner posts, fasteners |
| Delivery/Disposal | $0.20 | $0.60 | $2.00 | Depends on distance and debris removal needs |
| Permits & Fees | $0 | $200 | $600 | Varies by city/county |
Overview Of Costs
Cost ranges reflect typical residential siding projects using LP SmartSide board and batten, installed. Material is commonly priced per square foot, while labor is per hour or per square foot installed. For a standard 1,500 square foot wall area, expect total project costs to fall roughly in the range of $9,000-$20,000, depending on local labor and job specifics.
Total project ranges assume standard siding profile and 8-inch exposure, with common trim and weatherproofing. Per-unit ranges include both materials and installation in many markets, often expressed as $6.00-$12.00 per sq ft installed or $2.60-$4.50 per sq ft for material alone.
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (LP SmartSide boards & battens) | $1.80 | $3.20 | $5.50 | Includes seams and basic moisture barriers |
| Labor | $3.50 | $6.50 | $10.50 | Crew costs, surface prep, nail/screw install |
| Trim & Accessories | $0.40 | $1.20 | $3.00 | J-channels, corner posts, fasteners |
| Delivery/Disposal | $0.20 | $0.60 | $2.00 | Transport and debris removal |
| Permits | $0 | $200 | $600 | Local permit requirements |
What Drives Price
Material grade and profile—higher-grade LP SmartSide, premium priming, and battens with deeper grooves increase cost. Project size and complexity—larger homes or multi-story installations raise labor and scaffolding needs. Site access—restricted or elevated locations add labor time and safety considerations.
Regional Price Differences
Prices vary by region due to labor markets, disposal costs, and supply availability. In the Northeast, total installed costs can be 5-12% higher than the national average, while the Midwest may stay near average. The West often shows higher material shipping costs, influencing overall price by roughly 3-9% compared with the South. Assume typical suburban homes with standard access.
Labor, Hours & Rates
Labor costs reflect crew size and local wages. A two-person crew might rate $60-$80 per hour in many markets, with total installation times of 2-5 days for a typical 1,500 sq ft wall area. data-formula=”labor_hours × hourly_rate”>
Regional Pricing Snapshots
The following are illustrative regional deltas for LP SmartSide board and batten installations, excluding unusual site conditions. Urban areas usually incur higher labor and permit costs, while Rural areas may see lower labor costs but longer delivery times.
Real-World Pricing Examples
Basic—1,200 sq ft of LP SmartSide board and batten, standard 8″ exposure, no special finishes. Materials: $2.50 per sq ft; Labor: $5.50 per sq ft; Total: about $9,500. Assumptions: single-story, standard local crew, no permit fees.
Mid-Range—1,500 sq ft, basic trim, weatherproofing, and moisture barrier. Materials: $3.20 per sq ft; Labor: $6.50 per sq ft; Total: about $15,000. Assumptions: access manageable, mid-size home, disposal included.
Premium—2,000 sq ft, premium priming, extra battens, complex corners, and higher waste. Materials: $4.20 per sq ft; Labor: $9.00 per sq ft; Total: about $28,000. Assumptions: multi-story with scaffolding, permits, and added waste management.
Ways To Save
Compare quotes from multiple contractors to identify best pricing on LP SmartSide siding and batten; bundle labor with other exterior work to reduce mobilization charges; consider off-peak scheduling if regional price trends show seasonal dips.
Assumptions: region, specs, labor hours.