Readers typically pay for Hardie Plank siding by the square foot, with total project costs influenced by house size, profile, and installation labor. This article covers the cost and price ranges, plus practical factors that shape the final estimate.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Siding Materials | $2.75 | $4.50 | $6.50 | Per sq ft, 5/16 in thickness |
| Labor (Installation) | $2.00 | $4.00 | $6.50 | Per sq ft; crew rate varies by region |
| Prep & Repair | $0.50 | $1.50 | $3.00 | Sheathing prep, nail holes |
| Trim & Accessories | $0.40 | $1.20 | $2.50 | Corners, J channels, sealants |
| Permits & Inspections | $0 | $200 | $800 | Depends on locality |
| Delivery | $0 | $150 | $500 | Based on distance |
| dispose & Clean up | $0 | $100 | $300 | Debris handling |
| Warranty & Extras | $0 | $200 | $600 | Material and labor coverage |
Overview Of Costs
Cost ranges for Hardie Plank siding reflect material grade, board width, and project scope. For a typical single story home, expect total project costs in the $11,000 to $28,000 band, including removal of old siding and prep work. A smaller 1 story home under 1,200 sq ft may fall near the lower end, while larger homes with complex edges push toward the higher end. Assumptions: region, specs, labor hours.
Cost Breakdown
Below is a detailed breakdown with a combined total and per‑unit figures. The table shows a mid‑range scenario for clarity.
| Category | Low | Average | High | Units | Notes |
|---|---|---|---|---|---|
| Materials | $2.75 | $4.50 | $6.50 | $ / sq ft | 5/16 in thickness Hardie Plank |
| Labor | $2.00 | $4.00 | $6.50 | $ / sq ft | Weather and access impact hours |
| Prep & Repairs | $0.50 | $1.50 | $3.00 | $ / sq ft | Structural fixes if needed |
| Trim & Accessories | $0.40 | $1.20 | $2.50 | $ / linear ft | Corner posts, J channels |
| Permits | $0 | $200 | $800 | permits | Local rules vary |
| Delivery | $0 | $150 | $500 | delivery | Distance dependent |
| Disposal | $0 | $100 | $300 | lot | Debris handling |
| Warranty | $0 | $200 | $600 | coverage | Material and workmanship |
Assumptions: region, specs, labor hours.
What Drives Price
Regional differences influence contractor bids. The same project can vary by ±10 to 20 percent between urban, suburban, and rural markets due to labor supply and permit costs. For Hardie Plank, material costs are relatively stable, but installation complexity matters. A multi‑story home or a structure with many corners raises both labor hours and trim needs.
Labor, Hours & Rates
Labor costs depend on crew size and local wage standards. Typical crews charge per sq ft and can range from $2 to $6.50 for labor alone. An experienced crew may complete 1,200 to 2,000 sq ft per week on a straightforward job; complex edges or hooded soffits slow progress. data-formula=”labor_hours × hourly_rate”>
Regional Price Differences
Local markets show three distinct patterns. In the Northeast, expect higher permitting and labor costs; the Midwest often presents mid‑range pricing; the Southwest may run closer to the lower end due to milder weather and lower winter downtime. Estimates typically reflect these deltas: Northeast +10 to +15 percent, Midwest ±0 to +10 percent, Southwest −5 to +15 percent compared with national averages. Assumptions: region, specs, labor hours.
Labor & Installation Time
Install time scales with home size and board pattern. A standard 1,500 sq ft home may require 4–6 days of work for a crew of 3–4, while larger or complex homes extend to 1–2 weeks. Labor hours and crew composition directly impact total price, with higher hourly rates in dense urban zones.
Additional & Hidden Costs
Surprises can occur if there are preexisting moisture issues, rotten sheathing, or extensive window/door trim work. Add 8–15 percent contingency for contingencies and permits. Hidden costs can include scaffolding rental for two or more stories and disposal fees for old siding, which vary by municipality.
Real-World Pricing Examples
Three scenario cards illustrate practical budgeting.
Basic scenario covers a small single‑story 1,100 sq ft home with standard 6 ¼ in planks, in a suburban market. Materials and labor are modest; assume minimal prep. Total around $11,000 to $14,500.
Mid‑range scenario encompasses a 1,600 sq ft home with moderate prep, standard plank width, in a typical suburban area. Total around $16,000 to $22,000.
Premium scenario involves a 2,200 sq ft two‑story home with complex edges, extra trim, and faster project turnover in a high‑cost market. Total around $28,000 to $38,000.
Assumptions: region, specs, labor hours.
Pricing FAQ
How many square feet does Hardie Plank cover per carton varies by board width; typical coverage is 9.2 to 20 ft per board, translating to about 0.5 to 0.6 sq ft per linear foot depending on exposure. A standard 1,500 sq ft house might use roughly 15–18 thousand square feet of siding when including openings and waste.
Ways To Save
Buy in bulk with the same supplier for material discounts, and request a fixed hourly rate contract to avoid price creep. Assumptions: region, specs, labor hours.