Purchasing new doors in the U.S. typically ranges from a few hundred dollars for basic interior models to several thousand for premium exterior installations. Main cost drivers include door material, size, hardware, labor, and installation complexity.
Assumptions: region, door type, standard size, installed price includes basic workmanship and hardware.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Interior Door (solid core, prehung) | $70 | $230 | $550 | Standard 6’8 height |
| Exterior Door ( fiberglass/steel) | $300 | $900 | $2,400 | Includes basic hardware |
| Door Frame/Jamb Replacement | $180 | $450 | $1,200 | Depending on wall condition |
| Labor & Installation | $150 | $450 | $1,200 | Per door; varies by complexity |
| Hardware Upgrade (knobs, locks) | $20 | $120 | $500 | Smart locks extra |
| Permits & Inspections | $0 | $150 | $600 | Region dependent |
| Delivery/Removal/Disposal | $25 | $100 | $350 | Depends on distance |
Overview Of Costs
New doors can cost as little as a few hundred dollars for basic interior models, while exterior entry doors with premium finishes and security features can push total project prices into the low thousands. The typical installed price range for a standard interior door is roughly $200-$550, and for an exterior door, expect $900-$2,400 depending on material and hardware. Factors such as door size (single vs. French or double doors), whether the door is prehung, and the need for frame work or structural modifications significantly influence totals.
Cost Breakdown
In most projects, door price breaks down into materials, labor, and ancillary costs. A solid core interior door might be priced by the door itself, while exterior doors incur higher material costs and more extensive installation work. The table below presents a typical cost composition for a single-door replacement, with examples for different materials and setups.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $70 | $350 | $1,000 | Solid core or hollow core interior; steel/fiberglass exterior |
| Labor | $150 | $450 | $1,200 | Removal of old door, frame prep, hanging |
| Hardware | $20 | $120 | $500 | Knobs, hinges, strike plates; smart locks add cost |
| Permits | $0 | $100 | $600 | Municipal requirements vary |
| Delivery/Removal | $25 | $100 | $350 | Old door disposal included in some projects |
| Contingency | $0 | $50 | $250 | Unforeseen framing or alignment issues |
Pricing Variables
Price depends on material, door size, and installation complexity. Exterior doors differ by material (steel, fiberglass, wood) and security features; interior doors hinge on style (flush, paneled, French) and whether framing exists. Regional costs for labor and permits add another 5–20% variance depending on local codes and supply chains. For example, a 36-inch exterior fiberglass door with basic hardware may cost $800-$1,400 installed in one market, while the same door in a market with higher labor rates could reach $1,900-$2,400.
What Drives Price
Material quality and door type are the primary drivers. Solid wood or custom raised-panel interior doors cost more than hollow-core equivalents. Exterior doors add costs for weatherstripping, insulation, and security hardware. If a project requires reframing, expanding openings, or weatherproofing, expect an additional $200-$1,500 in labor and materials. For premium installations, look at energy-rated doors with enhanced insulation, extra-wide frames, and multi-point locking systems, which can add $600-$1,800 on top of base door costs.
Ways To Save
Several strategies can reduce upfront door costs without sacrificing function. Consider standard sizes and prehung doors to minimize framing work. Reusing existing hardware when compatible saves on install time and equipment. If a permit is required, plan for the permit cost separately and schedule around off-peak times to reduce labor rates in some markets. Buying from mass retailers vs. specialty installers can shift a portion of the price to materials rather than services, particularly for interior doors.
Regional Price Differences
Prices vary by region due to labor market and material availability. In the Northeast, installed exterior doors tend to be higher due to labor costs and stricter weatherproofing requirements. The Midwest often offers mid-range pricing with good value for fiberglass or steel doors. In the South and West, end prices can skew higher for premium finishes and local code specifics. A three-point spread of about ±10% to ±25% is common when comparing urban, suburban, and rural markets for typical door installations.
Labor & Installation Time
Labor times correlate with door type and home layout. Interior doors typically require 2–4 hours per unit in a standard setup, while exterior doors with frame work and weatherproofing may take 4–8 hours or more, depending on wall condition and insulation needs. If carpentry work is needed to widen an opening, plan for extended schedules and added costs. A typical project range for a single exterior door with standard hardware falls around 1,000–2,200 installed dollars, while a premium entry with smart lock and decorative glass may reach 2,500–4,000.
Additional & Hidden Costs
Expect some extras that can shift the final price. High-efficiency or impact-rated exterior doors may require specialized frames or glass, increasing costs. Matching casing, trim, and painting can add $100–$600. If existing doors sit in a nonstandard opening or a wall requires repair, the project may incur additional labor and material charges. Some suppliers charge delivery fees or minimum order quantities; others include disposal in the install price.
Real-World Pricing Examples
Scenario Card — Basic Interior Update
Specs: 6’8″ hollow-core interior door, standard prehung frame, basic hardware. Labor: 2 hours. Materials: $70. Hardware: $40. Delivery: included. Assumptions: single door, standard opening, light trim adjustments. data-formula=”labor_hours × hourly_rate”>
Costs: Materials $70, Labor $140, Hardware $40, Delivery $0, Permits $0, Tax optional. Total: approximately $250-$320 installed.
Scenario Card — Exterior Steel Door Upgrade
Specs: 36-inch exterior steel door, basic security hardware, weatherstripping, standard frame. Labor: 4–6 hours. Materials: $500. Hardware: $120. Delivery: $40. Assumptions: includes minor frame prep, no structural enlargement. data-formula=”labor_hours × hourly_rate”>
Costs: Materials $500, Labor $600, Hardware $120, Permits $0–$150, Delivery $40, Tax exclude. Total: approximately $1,260-$1,460 installed.
Scenario Card — Premium Fiberglass Entry with Tech Lock
Specs: 42-inch x 82-inch fiberglass door, multi-point locking, insulated glass, decorative panel, upgraded trim. Labor: 6–8 hours. Materials: $1,000. Hardware: $350. Delivery: $60. Assumptions: energy rating and security level above baseline. data-formula=”labor_hours × hourly_rate”>
Costs: Materials $1,000, Labor $1,000, Hardware $350, Permits $0–$200, Delivery $60, Tax exclude. Total: approximately $2,500-$2,900 installed.