Buyers typically pay a modest fee to rekey a Schlage lock, with main cost drivers including lock type, the number of cylinders, and labor time. The price range covers parts, service, and any basic hardware adjustments needed for a secure, up-to-date keying system.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Rekey Service | $60 | $120 | $200 | Includes key matching and cylinder reconfiguration |
| Lock Type Surcharge | $0 | $20 | $60 | Single cylinder vs deadbolt variations |
| Labor (hourly) | $40 | $85 | $120 | Typical 1–2 hours |
| Trip / Call Fee | $0 | $25 | $60 | Depending on distance or service window |
| Replacement Hardware | $0 | $15 | $40 | New keys, pins, or springs if needed |
| Warranty / Support | $0 | $10 | $20 | Limited coverage on rekey work |
Overview Of Costs
When rekeying a Schlage lock, the total project cost generally falls in the $60-$200 range for basic service and increases with more complex hardware or longer service areas. The per-unit price typically sits around $60-$150 for the essential rekey operation, with labor driving most of the variance. Assumptions: standard residential single-cylinder deadbolt, typical two-to-four pin cylinder, within normal service hours. Assumptions: region, specs, labor hours.
Cost Breakdown
The following table summarizes costs by component for a typical Schlage rekey job.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Rekeying Materials | $0 | $15 | $40 | Pins, tumbler changes if needed |
| Labor | $40 | $85 | $120 | 1–2 hours typical |
| Lock Type Surcharge | $0 | $20 | $60 | Deadbolt vs passage or knob variants |
| Trip / Service Call | $0 | $25 | $60 | Distance-based |
| Parts Replacement | $0 | $15 | $40 | Additional hardware if cylinders wear |
| Taxes / Fees | $0 | $8 | $20 | Local tax where applicable |
What Drives Price
Key price drivers include lock complexity, cylinder type, and travel time for a Schlage rekey. A standard residential rekey assumes a single-cylinder deadbolt or knob with a straightforward pin kit. If the lock is a high-security model or uses a multi-cylinder setup, costs increase due to more pins, longer service time, and potential core changes. Labor rates vary by region and installer qualifications, typically $40–$85 per hour, with total hours commonly 1–2 for straightforward jobs. Labor hours × hourly rate can be used to estimate the final bill.
Ways To Save
Low-cost options include scheduling during off-peak hours when labor rates drop and combining rekeying with adjacent hardware work in one trip. If the existing cylinder shows wear, replacing only the necessary pins instead of a full core can trim costs. Some providers offer flat-rate rekey packages for common Schlage models, which helps budgeting. Ask about travel fees and whether a one-time visit covers multiple locks on the same property.
Regional Price Differences
Prices vary by region due to labor markets and travel considerations. In urban areas, expect higher labor rates and potential surcharge for same-day service. Suburban regions typically show mid-range pricing, while rural locations may incur travel charges that push the total higher relative to local labor rates. Typical regional deltas: Urban +10% to +25%, Suburban ±0% to +10%, Rural +5% to +15% over base rates. Regional pricing variations depend on proximity to technicians and demand.
Labor & Installation Time
Most rekeys take 1–2 hours, but some Schlage models require more time due to additional pins or security features. Labor costs scale with hours and hourly rate. For a two-lock rekey in one visit, the combined labor could be 2–3 hours, translating to $80–$255 in labor alone depending on the rate. data-formula=”labor_hours × hourly_rate”> Pro tip: confirm whether the quote includes any core or tumbler changes beyond basic rekeying.
Real-World Pricing Examples
Three scenario cards illustrate common outcomes for typical homes.
- Basic: Single-cylinder deadbolt, standard pins, within 5 miles. Specs: 1 lock, 1 key set. Hours: 1.0–1.5. Parts: minimal. Total: $60–$100. Per-unit: $60–$70. Notes: Call fee may apply.
- Mid-Range: 1 deadbolt plus entry knob, multi-pin cylinder, within 15 miles. Hours: 1.5–2.0. Parts: pins, minor hardware. Total: $110–$180. Per-unit: $75–$100. Notes: Possible travel surcharge.
- Premium: High-security Schlage model, multi-cylinder setup, 2 locks, 20+ pins, within 25 miles. Hours: 2.0–3.0. Parts: pins, cores, replacement hardware. Total: $170–$260. Per-unit: $85–$130. Notes: Higher travel and core costs.
Assumptions: region, specs, labor hours.