Buyers typically see a broad range for triple wide homes, driven by size, finishes, and site work. The cost and price depend on the base unit, delivery, setup, and local codes. This guide summarizes typical ranges and cost drivers to help with budgeting.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Base Triple-Wide Unit | $60,000 | $120,000 | $200,000 | 2–3 bedrooms is common; modern interiors vary widely |
| Delivery | $5,000 | $15,000 | $25,000 | Distance and road restrictions affect cost |
| Site Prep & Foundation | $10,000 | $40,000 | $100,000 | Grading, piers, or slab can add up |
| Setup & Utilities Hookups | $8,000 | $20,000 | $40,000 | Plumbing, electrical, and gas tie-ins |
| Permits & Inspections | $1,000 | $5,000 | $15,000 | Varies by municipality |
| Delivery Accessories & Skirting | $1,500 | $5,000 | $12,000 | Exterior finishing options |
| Taxes & Fees | $2,000 | $8,000 | $20,000 | State and local variations |
| Total Estimated Range | $87,500 | $213,000 | $412,000 | Assumes standard finishes and moderate site work |
Assumptions: region, specs, labor hours.
Overview Of Costs
The price for a triple wide home combines the base unit, delivery, site work, and permitting, resulting in a wide range from affordable to premium finishes. In general, installed costs fall in the range of $150,000 to $400,000, with per-square-foot pricing often shown as $100 to $180 per sq ft for the finished home. Higher-end materials, upgraded kitchens, and enhanced energy efficiency push costs toward the upper end.
Cost Breakdown
Below is an itemized look at common cost components for a typical triple wide installation. The table uses a mix of totals and per-unit costs to aid budgeting.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $60,000 | $120,000 | $200,000 | Cabinets, flooring, fixtures |
| Labor | $15,000 | $40,000 | $90,000 | Installation crew, site labor |
| Equipment | $5,000 | $15,000 | $25,000 | Machinery, scrapers, leveling |
| Permits | $1,000 | $5,000 | $15,000 | Building and utility permits |
| Delivery/Disposal | $4,000 | $12,000 | $25,000 | Haul-away and placement |
| Warranty & Aftercare | $1,000 | $4,000 | $8,000 | Limited lifetime or year warranties |
| Overhead | $2,000 | $6,000 | $12,000 | Administration, permitting support |
| Taxes | $2,000 | $8,000 | $20,000 | State/local impact |
Assumptions: region, specs, labor hours.
What Drives Price
Material quality and interior finishes are the primary price levers. Length and layout complexity of the triple-wide also influence costs, as does site readiness, foundation type, and utility connections. For example, upgrades like solid wood cabinetry or high-efficiency HVAC add tangible cost, while simple finishes and standard appliances reduce the total.
Factors That Affect Price
Regional differences, labor rates, and local codes can shift totals by significant margins. The smallest price variations often come from foundation type and site prep complexity, while large variations stem from the base unit’s size, interior finish choices, and energy systems.
Regional Price Differences
Prices vary across regions due to labor, permitting, and transport costs. In the table, three broad categories illustrate typical deltas: Urban, Suburban, and Rural, with ± adjustments relative to national averages.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Urban | $170,000 | $260,000 | $430,000 | Higher labor and delivery complexity |
| Suburban | $150,000 | $230,000 | $380,000 | Most common range |
| Rural | $130,000 | $200,000 | $320,000 | Lower land and permitting friction |
Labor, Hours & Rates
Install time for a triple wide typically spans a few days to weeks, depending on site readiness and crew size. Labor costs often range from 30% to 50% of total costs, with regional wage differences causing notable shifts. A mini formula can help: data-formula=”labor_hours × hourly_rate”>
Ways To Save
Cost-conscious buyers can pursue phased upgrades and standard finishes to curb early outlays. Options include selecting standard appliances, using factory-backed warranties, coordinating with a single-point contractor, and scheduling site work in off-peak seasons to reduce delivery and labor costs.
Real-World Pricing Examples
Three scenario cards illustrate how choices affect total cost. All include standard delivery and basic site work, with variations in finishes and utilities.
Basic Scenario: 26×60 triple-wide, standard finishes, modest site prep. Labor 120 hours; materials at $70,000; total around $150,000–$190,000.
Mid-Range Scenario: 28×72, upgraded kitchen, energy-efficient HVAC, concrete pad. Labor 180 hours; materials at $110,000; total about $230,000–$300,000.
Premium Scenario: 30×80 with premium cabinets, luxury fixtures, advanced insulation, and extensive site prep. Labor 240 hours; materials at $170,000; total roughly $380,000–$450,000+