Homeowners typically pay for aluminum siding based on factors such as panel style, thickness, labor, and regional pricing. The main cost drivers include material grades, removal of old siding, and installation complexity. The price range below helps establish a realistic budget for replacement or new installation.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material | 1.75 | 3.50 | 6.50 | Per sq ft; includes standard 0.019 inch to 0.032 inch thickness |
| Installation Labor | 2.50 | 4.50 | 7.50 | Per sq ft; removal of old siding adds time |
| Removal & Disposal | 0.60 | 1.50 | 2.50 | Per sq ft; varies by debris handling |
| Cleanup & Prep | 0.25 | 0.75 | 1.25 | Per sq ft; minor to moderate prep |
| Permits & Inspections | 50 | 150 | 350 | Region dependent |
| Delivery & Waste Fees | 20 | 60 | 120 | Variable by project size |
| Warranty & Extras | 0 | 0.75 | 2.00 | Pro-rated by contract |
Assumptions: region, project size, siding profile, and labor hours are typical for mid sized homes in suburban markets.
Overview Of Costs
Typical cost range for installed aluminum siding is roughly $3.50 to $8.00 per sq ft depending on profile and region. data-formula=”labor_hours × hourly_rate”> A full exterior removal and replacement on a standard 1,500 sq ft home commonly falls in the $12,000 to $24,000 band before any discounts or rebates. The per unit measure helps compare materials and labor quickly, with aluminum siding commonly priced as a total per sq ft rather than a fixed package.
Cost Breakdown
Table above summarizes the main components and how they contribute to the final price. The largest share typically goes to labor and removal, followed by material cost. Additional items such as permits, delivery, and waste disposal can add to the project total. Assumptions: single story home, standard aluminum profiles, no custom color or heavy decorative trim.
What Drives Price
Key drivers include siding thickness and profile, color options, and whether the project includes removing old material. Thicker gauges and premium profiles raise material costs, while labor costs vary with crew size, height, and roof line complexity. Material choice like smooth vs textured finishes also shifts pricing slightly. Assumptions: typical 0.019–0.032 inch aluminum, smooth or lightly textured finish.
Ways To Save
Bulk project planning and accurate measurements reduce waste and overage by avoiding multiple trips and returns. Choosing standard colors and profiles lowers material costs, while self prepping surfaces and scheduling during off peak season can lower labor rates. Assumptions: project scope remains single building envelope with standard eaves.
Regional Price Differences
Prices vary by region due to labor markets and material sourcing. In the Northeast, insulation and access constraints can raise average costs by about 5 to 12 percent compared with the Midwest. The West may see 3 to 10 percent higher due to shipping and permit variability, while the Southeast often sits around the national average with regional fluctuation. Assumptions: three distinct markets with typical climate and labor norms.
Labor & Installation Time
Typical install times range from 2 to 5 days depending on house size and height, with labor costs reflecting crew size and hours worked. A 1,500 sq ft home on one story often requires a 2 to 3 person crew for 2 to 3 days. A two story or multi section home may extend to 4 days or more. Assumptions: standard ladder access, no structural repairs, no unusual weather.
Additional & Hidden Costs
Hidden costs can emerge from old siding removal, disposal, and site prep. Extra charges may include roof edge protection, trim replacement, corner posts, and caulking. Some contractors bill for freight, permits, and dumpster rentals separately. Assumptions: no storm damage or asbestos presence; standard city permits where required.
Real World Pricing Examples
Three scenario cards illustrate practical budgets. Each includes a mix of materials, labor, and add ons to reflect different project goals.
Scenario A Basic
Specs: standard 0.028 inch panel, smooth finish, single story, 1,500 sq ft. Labor 20–28 hours; material 1,500 sq ft; no premium trim. Total may be around 12,000 to 14,500 dollars. Assumptions: suburban area, mid tier contractor.
Scenario B Mid Range
Specs: 0.032 inch panel, textured finish, two story, 1,800 sq ft. Labor 30–40 hours; materials 1,800 sq ft; includes removal of old siding and basic trim. Total about 18,000 to 26,000 dollars. Assumptions: regional market with moderate permit requirements.
Scenario C Premium
Specs: premium profile, high color durability, three story, 2,000 sq ft. Labor 45–60 hours; materials 2,000 sq ft; includes upgraded trim and waste disposal. Total around 28,000 to 40,000 dollars. Assumptions: high service level and complex roof lines.