Homeowners typically pay for redwood fencing based on materials, labor, and location. The average price per linear foot reflects board quality, fence height, and installation complexity. This article provides cost estimates in USD with clear low–average–high ranges and notes the main cost drivers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (redwood boards, rails, posts) | $6.50 | $10.50 | $14.50 | Includes pressure-treated framing and finishing |
| Labor & Installation | $8.00 | $12.50 | $20.00 | Professional crew, standard spans |
| Hardware & Fasteners | $1.50 | $3.50 | $6.00 | Screws, nails, brackets |
| Permits & Inspections | $0 | $200 | $800 | Varies by locality |
| Delivery & Disposal | $0 | $150 | $400 | Distance dependent |
Overview Of Costs
Cost ranges for a typical redwood fence are commonly reported as $7.50–$24.00 per linear foot installed, depending on grade, height, and locale. The Assumptions: region, specs, labor hours. For a standard 6-foot privacy fence using common redwood species, expect a blended per-foot cost near the average line, with higher figures for premium boards or complicated layouts.
Cost Breakdown
The following table summarizes how the total price is allocated in a typical project. Materials dominate the base price for redwood fencing, while labor drives total cost in most markets.
| Component | Typical Range | Per-Foot Basis | Notes |
|---|---|---|---|
| Materials | $6.50–$14.50 | $6.50–$14.50 | Boards, rails, posts, caps |
| Labor | $8.00–$20.00 | $8.00–$20.00 | Cutting, fitting, staining/finishing |
| Hardware | $1.50–$6.00 | $1.50–$6.00 | Hinges, screws, brackets |
| Permits | $0–$800 | $0–$8.00 | Variable by region |
| Delivery/Disposal | $0–$400 | $0–$4.00 | Distance dependent |
What Drives Price
Board quality, height, and length of run are primary price levers. Higher-grade redwood with tight grain and minimal knots costs more per linear foot. Taller fences or long, uninterrupted spans require more posts and bracing, increasing both material and labor hours. Regional labor rates and permit costs also shift overall pricing.
Factors That Affect Price
Several factors can push cost up or down beyond the base ranges. Local labor availability and material sourcing affect both per-foot and total project numbers. Additionally, gate number, hardware quality, and finish (stain/seal) contribute to final pricing.
Ways To Save
Early planning and efficient design reduce waste and labor time. Choosing standard heights and spacing minimizes cut waste. Purchasing materials during off-peak seasons or in volume can yield discounts. Consider composite accents only where desired to limit expensive redwood runs.
Regional Price Differences
Prices vary across the U.S. due to local costs and availability. In general, coastal markets show higher ranges than inland rural areas. Urban areas tend to be 10–20% higher than suburban regions, while rural regions may be 5–15% lower, depending on access and crew demand.
Labor & Installation Time
Labor costs reflect crew size and time required. Typical installation for a 150–200 ft run may require 1–2 workers over 1–3 days. data-formula=”labor_hours × hourly_rate”> Short, straightforward layouts save time; complex gates and custom post caps increase hours and price.
Additional & Hidden Costs
Hidden charges often involve site preparation, grading, and post-hole digging. Some projects incur surprise fees for soil conditions or permit scope changes. Ensure the estimate includes finishing (stain/seal) and warranty terms to avoid later add-ons.
Real-World Pricing Examples
Three scenario cards illustrate plausible budgets for common installations. Assumptions: region, specs, labor hours.
Basic Scenario
Length: 100 ft, 6 ft high, standard redwood boards, few gates. Materials: $8.00/ft; Labor: $10.00/ft; Total: $1,800–$2,600. Per-foot averages reflect economy-grade wood and routine installation.
Mid-Range Scenario
Length: 120 ft, 6 ft high, premium boards, 1 gate. Materials: $11.50/ft; Labor: $12.50/ft; Total: $3,200–$4,000. Includes stain and better hardware.
Premium Scenario
Length: 150 ft, 6 ft high, select-grade redwood, multiple gates, custom posts. Materials: $14.50/ft; Labor: $20.00/ft; Total: $5,600–$7,600. High-end finish and custom components drive the top end.