Azek decking materials cost per linear foot varies by profile, color, and quantity, with installation prices adding to the total. The main cost drivers are material grade, board width and profile, labor time, and regional pricing. The following figures show typical ranges in USD to help buyers estimate a project budget.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material (AZEK decking boards, per linear ft) | $4.50 | $6.50 | $9.00 | Color, profile (plank vs capped edge), and thickness affect price |
| Installation (labor per linear ft) | $4.00 | $7.00 | $13.00 | Includes fastening, boards, and basic joist connection |
| Total Installed (per linear ft, combined) | $8.50 | $13.50 | $22.00 | Assumes standard 5.5-inch board, typical joist spacing |
Overview Of Costs
Cost ranges reflect material plus installation per linear foot. The total price typically spans from about $8.50 to $22.00 per linear foot, depending on board profile, color, and local labor rates. Assumptions: standard 5.5-inch AZEK deck boards, basic hidden fasteners, and normal outdoor exposure. Regional differences in labor costs and material availability shape the final figure.
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $4.50 | $6.50 | $9.00 | Deck boards, caps, trims |
| Labor | $4.00 | $7.00 | $13.00 | Removal, framing prep, installation |
| Permits/Inspections | $0.00 | $0.50 | $2.00 | Depends on jurisdiction |
| Delivery/Disposal | $0.50 | $1.50 | $3.50 | Material delivery or waste disposal |
| Warranty/Overhead | $0.50 | $1.00 | $2.50 | Manufacturer warranty and contractor overhead |
| Taxes | $0.00 | $0.80 | $2.50 | State/local sales tax |
What Drives Price
Material profile and board width influence cost. AZEK options include different caps and edge treatments; wider boards or specialty colors raise material price. Assumptions: standard no-ornamental edges, solid color, capped polymer technology.
Cost Drivers
A few key drivers affect pricing for AZEK decking per linear foot:
- Board profile and thickness: 5.5-inch boards vs premium profiles can shift material cost by 1–3 USD per ft.
- Color and finish: Specialty colors or textures add to material cost but may offer long-term aesthetics.
- Labor rates by region: Urban areas typically incur higher installation costs than rural areas.
- Joist condition and prep work: Additional framing or repairs increase labor hours.
- Hidden fasteners and trim: premium fastening systems add material and time costs.
Ways To Save
Cost-conscious strategies can trim both materials and labor. Buy in bulk, request bundled quotes, and compare different AZEK profiles to balance price and longevity. Off-peak scheduling may reduce labor charges in some markets. Maintenance practices that extend deck life also lower long-term ownership costs.
Regional Price Differences
Prices vary across regions. In the Northeast, higher labor rates may push installed per-foot costs toward the upper end of the range; the Midwest generally sits near the average; the South often sees lower installation charges. Regional deltas can be ±10–20% depending on demand, weather, and local supply chains. Material costs tend to follow national pricing bands but can shift with freight or retailer promotions.
Labor, Hours & Rates
Labor hours depend on deck size, access, and joist condition. A typical install runs 8–16 hours for a small to mid-size deck, translating to roughly $4–$13 per linear foot in labor. data-formula=”labor_hours × hourly_rate”> Contractors may adjust rates for complex layouts or high elevations.
Real-World Pricing Examples
Three scenario cards illustrate how per-foot pricing translates into total project sums.
- Basic — 250 ft of linear decking, standard profile, straightforward layout. Materials: $1,125; Labor: $1,250; Permits/Delivery: $200; Total: $2,575.
- Mid-Range — 400 ft, premium color, hidden fasteners, modest stairs. Materials: $2,600; Labor: $2,800; Delivery/Warranty: $600; Total: $6,000.
- Premium — 600 ft, high-end profile, complex geometry, color-matched trim. Materials: $4,500; Labor: $5,000; Permits/Disposal: $1,200; Total: $10,700.
Assumptions: region, specs, labor hours.
Price By Region
Regional comparisons help refine expectations. In urban coastal areas, installed AZEK decking per linear foot can trend higher than the national average due to labor availability and permitting; suburban regions often align with the average; rural markets may show modest reductions. The spread often reflects ±12% to ±18% relative to the national midpoint.