Beveled cedar siding prices vary widely by wood grade, thickness, bevel angle, and finish. This guide provides typical cost ranges in USD, with clear low–average–high estimates and common price drivers to help buyers plan a budget. The word “cost” and “price” appear here to address pricing inquiries early in the read.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (cedar bevel siding) | $2.00/sq ft | $3.50/sq ft | $5.00+/sq ft | Includes boards, trim; assumes standard 4/4 bevel |
| Labor (installation) | $4.00/sq ft | $6.50/sq ft | $8.50+/sq ft | Includes nailers, flashing prep |
| Equipment & Tools | $0.40/sq ft | $0.90/sq ft | $1.50/sq ft | Power saws, scaffolding, rental |
| Permits & Inspections | $0.10/sq ft | $0.40/sq ft | $1.00/sq ft | Region-dependent |
| Delivery/Disposal | $0.20/sq ft | $0.50/sq ft | $1.00/sq ft | Waste from installation |
| Taxes & Contingency | $0.40/sq ft | $0.90/sq ft | $1.50/sq ft | Contingency for weather/fit issues |
Overview Of Costs
Typical project ranges for beveled cedar siding installation span from roughly $6 to $12 per square foot installed, depending on grade, bevel, and finish. This translates to about $9,000–$18,000 for a 1,500 sq ft home, or $12,000–$28,000 for 2,500 sq ft. Assumptions: region, specs, labor hours.
Cost Breakdown
Beveled cedar siding has multiple cost components. The following table summarizes how each element contributes to the total price, with regional differences and explicit per-unit figures where applicable. Material quality and finish drive the majority of the variance.
| Category | Low | Average | High | Notes | Per-Unit Basis |
|---|---|---|---|---|---|
| Materials | $2.00/sq ft | $3.50/sq ft | $5.00+/sq ft | Includes boards, trim, sealant | $/sq ft |
| Labor | $4.00/sq ft | $6.50/sq ft | $8.50+/sq ft | Installation and fastening | $/sq ft |
| Equipment | $0.40/sq ft | $0.90/sq ft | $1.50/sq ft | Scaffolding, nails, tools | $/sq ft |
| Permits | $0.10/sq ft | $0.40/sq ft | $1.00/sq ft | Local permitting varies | $/sq ft |
| Delivery/Disposal | $0.20/sq ft | $0.50/sq ft | $1.00/sq ft | Transport and waste handling | $/sq ft |
| Taxes & Contingency | $0.40/sq ft | $0.90/sq ft | $1.50/sq ft | Unexpected costs | $/sq ft |
Pricing Variables
Material grade, bevel size, and finish type are the primary cost drivers. Cedar grades range from standard clear to select and clear; higher grades reduce defects but raise material costs. Bevel angle (e.g., 4/12 vs 6/12) changes waste and processing time, affecting labor. Additional drivers include existing siding removal, backer materials, and trim complexity around windows and doors.
Other notable factors include climate considerations, which influence moisture protection needs, and the local labor market. Assumptions: new installation on exterior walls, standard window trim, mid-grade finish.
What Drives Price
Regional price differences can shift totals by a sizable margin due to labor costs, material availability, and transit. In major urban centers, expect higher quotes; rural areas may be more economical but limited supplier options. Per-unit costs may differ for coastal or high-humidity zones due to additional sealants and moisture barriers.
Ways To Save
Buy in bulk and choose mid-grade cedar to balance aesthetics and cost. Scheduling work in off-peak seasons can also reduce labor rates. Purchasing factory-primed or pre-finished bevel siding may cut exterior painting needs, though it shifts upfront material costs. Consider combining siding with moisture barrier upgrades to avoid future repair costs.
Regional Price Differences
Compare three U.S. regional profiles to understand price dispersion. Urban centers typically show the highest installed costs due to labor and logistics, suburban markets sit mid-range, and rural markets often present the lowest price bands due to cheaper labor but potential material transport costs. Urban: +15–25% vs. Rural; Suburban: +0–10% vs. Rural.
Assumptions: standard house shape, 1,500–2,000 sq ft siding area.
Labor, Hours & Rates
Labor time for beveled cedar siding depends on wall complexity, weather, and board length. A typical crew may install 1,200–2,000 sq ft per week under
ideal conditions. Harder jobs with custom trim or vented soffits add 10–30% to labor hours. Labor rate range: $4.50–$7.50 per sq ft.
Additional & Hidden Costs
Hidden fees can include scaffold setup, window/door flashing, scaffolding rental, and discard container fees. If gutters, soffits, or soffit vents require rework, expect additional line items. Assume a 5–10% contingency for weather delays unless the project occurs in a dry season.
Real-World Pricing Examples
Scenario 1 — Basic
1,200 sq ft of bevel siding, mid-grade cedar, standard trim, no significant removal. Materials: $2.50/sq ft; Labor: $5.50/sq ft; Per-unit substitutions included. Total: data-formula=”1200×(2.5+5.5)”> $9,000–$12,000. Assumptions: single-story, typical climate.
Scenario 2 — Mid-Range
2,000 sq ft with minor removal of existing siding, pre-finished bevel, added flashing. Materials: $3.75/sq ft; Labor: $6.75/sq ft; Permits included. Total: data-formula=”2000×(3.75+6.75)”> $20,000–$28,000. Assumptions: two-story, temperate region.
Scenario 3 — Premium
2,500 sq ft with high-grade cedar, 6/12 bevel, extensive trim, and moisture barrier upgrade. Materials: $5.00/sq ft; Labor: $8.25/sq ft; Extras: $1.00/sq ft. Total: data-formula=”2500×(5+8.25+1)”> $32,500–$39,000. Assumptions: coastal climate, detailed window trim.
Assumptions: region, specs, labor hours.
Maintenance & Ownership Costs
Beveled cedar siding requires periodic maintenance to maintain appearance and protect against moisture. Expect repaint or re-stain every 3–7 years, with maintenance costs ranging from $0.50–$1.50 per sq ft per year for staining and sealing. A 5-year cost outlook helps quantify repaint cycles and potential sealant upgrades.
Price At A Glance
Beveled cedar siding is a durable, high-visual-impact option with costs primarily driven by material grade and finish, bevel size, and installation complexity. For budgeting, plan for a per-square-foot installed range of $6–$12, with total project quotes aligning to home size, roofline complexity, and locale. Per-unit pricing examples: $/sq ft and total project ranges reflect standard labor and materials bundles.