Homeowners typically pay a broad range for brick storage sheds, driven by brick type, foundation needs, size, and finish details. The price landscape reflects material quality, local labor, and permit requirements. This article outlines typical costs in USD, with low–average–high ranges and practical price guidance for U.S. buyers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (brick, mortar, roof) | $2,800 | $6,000 | $12,000 | Includes basic bricks and roofing; higher for premium brick and complex roofs |
| Labor | $2,000 | $4,500 | $8,500 | Depends on wall height, pattern, and crew hours |
| Permits | $100 | $1,500 | $3,000 | Location-dependent; may require zoning review |
| Delivery/Disposal | $300 | $1,000 | $2,000 | Includes crane or heavy equipment if needed |
| Foundation & Site Prep | $1,000 | $3,000 | $6,000 | Concrete pad or ground anchors increase costs |
| Contingency | $400 | $1,200 | $3,000 | Assumes 10–15% of project cost for surprises |
Assumptions: region, shed size (120–240 sq ft), brick type, roof style, and local labor rates.
Overview Of Costs
Typical brick shed projects span a broad range from roughly $8,000 to $28,000. Most installations fall between $12,000 and $20,000 for a standard 150–200 sq ft footprint with a brick veneer and a pitched roof. Per-square-foot pricing commonly runs $45–$180 depending on brick, structural details, and site prep. A smaller, simple build on a slab can land near the low end, while a full-brick, chimney-inclusive design on a challenging slope will push toward the high end.
Key price drivers include foundation requirements, brick type (face brick vs. reclaimed or thicker modular bricks), roof material (asphalt shingle vs. metal), and whether utility connections or windows are added.
Cost Breakdown
The following table outlines major cost categories and likely ranges, with a focus on bricks and installation. The totals assume a mid-range shed with standard foundation and modest detailing.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2,800 | $6,000 | $12,000 | Brick, mortar, roofing, framing, doors/windows |
| Labor | $2,000 | $4,500 | $8,500 | Framing, bricklaying, finish work |
| Permits | $100 | $1,500 | $3,000 | Local permits and inspections |
| Delivery/Disposal | $300 | $1,000 | $2,000 | Materials transport and debris removal |
| Foundation & Site Prep | $1,000 | $3,000 | $6,000 | Slab, footings, or raised foundation |
| Contingency | $400 | $1,200 | $3,000 | Budget cushion for unforeseen work |
Assumptions: 120–200 sq ft footprint, standard doors, modest detailing.
What Drives Price
Brick type, wall height, and roof complexity are primary drivers. A veneer brick wall with a simple gable roof costs less than full-thickness brick with a complex hip roof and decorative cornices. The foundation choice—slab, crawlspace, or footing-and-piers—affects both material and labor costs. Sealed windows, custom entry doors, and added vents increase expenses. Local labor rates and access constraints can shift totals by ±20% or more.
Other notable drivers include drainage coordination, site grading, and whether the shed includes electrical outlets, lighting, or plumbing connections. For estimating accuracy, treat these as separate line items with explicit quantities and unit prices.
Ways To Save
Choosing a simpler design and delaying nonessential finishes can trim costs. Consider a standard-height wall, laminated or vinyl windows instead of custom glazing, and a moderate roof system. If permits are a concern, bundle the shed with nearby project work to share inspection fees. Scheduling outdoor work in the off-season may yield lower labor rates in some regions. A brick veneer over a cheaper structural shell can also reduce upfront costs without sacrificing storage value.
Engage suppliers for bulk material pricing, and confirm waste disposal arrangements early to avoid surprises at the job site.
Regional Price Differences
Prices vary by region due to labor markets, material availability, and permitting processes. In the Northeast, expect higher labor and permitting costs, with ranges commonly 10–25% above national averages. The South tends to be a bit cheaper for materials and foundation work, though climate-related adjustments (ventilation, damp-proofing) can add. The Midwest often sits mid-range but can spike in urban markets where urban-core zoning adds compliance costs. Across regions, a 15–25% delta between low-cost rural markets and high-cost metro areas is typical for brick sheds.
Real-World Pricing Examples
Three scenario cards illustrate common outcomes across sizes and finishes.
-
Basic (120 sq ft, veneer brick, asphalt roof)
Specs: 120 sq ft footprint, standard doors, slab foundation, minimal trim.
Labor: 40 hours at $60/hour; Materials: mid-range bricks and roofing.
Total: $9,500; per sq ft: $79; Notes: permits minimal if any, delivery included. -
Mid-Range (180 sq ft, full brick, metal roof)
Specs: 180 sq ft, full brick veneer, engineered roof, modest windows.
Labor: 70 hours at $65/hour; Materials: premium brick, metal roofing; Permits: standard.
Total: $16,800; per sq ft: $93; Notes: regional variation may apply, delivery extra. -
Premium (240 sq ft, full brick, complex roof, utilities)
Specs: 240 sq ft, full brick, decorative cornice, utility-ready interior, concrete slab.
Labor: 110 hours at $75/hour; Materials: high-end brick, custom doors, expansive roof; Permits: enhanced review.
Total: $28,200; per sq ft: $118; Notes: includes contingency; delivery included.
Assumptions: region, specs, labor hours.
Additional & Hidden Costs
Hidden costs can alter the final price by 5–15%. Common extras include drainage and grading, interior finishing, pest barrier installation, paint or stain, and long-term maintenance items like repointing joints. If an unanticipated water intrusion issue arises, foundation remediation may be required. Equipment rental or rental-time extensions, as well as temporary power supply during construction, can add to the bill. Budget for warranty extensions if offered by installers.
Always request a detailed invoice with itemized line items and notes on any assumptions to compare bids effectively.