Cambria Countertops Price Guide 2026

Practical estimates for Cambria countertops typically range from a modest budget to premium projects. The price depends on slab thickness, edge and sink options, fabrication complexity, and local labor rates. This guide focuses on cost considerations and realistic price ranges to help buyers plan a Cambria installation with confidence.

Item	Low	Average	High	Notes
Cambria Material (per sq ft)	$60	$80	$110	Includes standard slabs, mid-range pattern, no special reselection.
Edge Profile (per linear ft)	$25	$40	$70	Round, eased, or standard Ogee edge add cost.
Fabrication & Installation (per project)	$1,200	$2,500	$4,000	Includes templating, cutting, polishing, and install crew.
Sink Cutouts & Accessories	$150	$350	$700	Integrated or drop-in sinks, fittings, and hardware.
Delivery & Disposal	$100	$300	$600	Includes haul-away of old countertops if applicable.

Assumptions: region, specs, labor hours.

Overview Of Costs

Cambria countertop pricing blends material cost with fabrication and installation labor. The typical project covers 30–40 linear feet for a standard kitchen, with 1.25″ or 2CM thickness as common choices. A reasonable range you’ll see is $4,800 to $10,000 for mid-size kitchens, depending on edge details and layout complexity. For larger spaces or premium patterns, costs can exceed $12,000. The per-square-foot arithmetic is $60–$110 for material plus $20–$70 per linear foot for edge work, and $1,200–$4,000 for fabrication and installation in total. These ranges assume standard cabinets and a straightforward layout, with no major irregularities.

Cost Breakdown

Category	Low	Average	High	Notes
Materials	$60/sq ft	$80/sq ft	$110/sq ft	Standard Cambria slabs; pattern complexity affects cost.
Labor	$1,200	$2,500	$4,000	Templates, precision cutting, edge finishing, seam work.
Edges	$25/ft	$40/ft	$70/ft	Custom or elaborate profiles raise price.
Delivery	$100	$300	$600	Fuel surcharge or restricted access adds cost.
Permits, If Required	$0	$200	$500	Uncommon for interior kitchen installs; varies by locale.
Waste & Contingency	$50	$200	$500	Buffer for waste slabs and minor corrections.

What Drives Price

Material selection and edge complexity are primary drivers. Cambria offers a wide range of colors and patterns, and some high-contrast or veined designs can command a premium. Edge profiles such as full bullnose or Ogee add significant per-foot costs beyond a basic straight edge. Layout considerations—corner radii, long overhangs, or multiple sink cutouts—also impact fabrication time and waste. Regional wage differences and local permit requirements further influence final pricing.

Ways To Save

Smart planning can trim costs without sacrificing quality. Consider standard edge profiles, select mid-range colors with readily available slabs, and aim for straight runs with minimal seams. If possible, combine multiple surfaces or use a single slab to reduce waste and seams. Scheduling during off-peak seasons can impact installation labor rates. Matching sink type and avoiding custom fabrication at initial ordering helps lock in a lower baseline price.

Regional Price Differences

Prices vary by region due to labor markets and material availability. In the Northeast, total project costs for Cambria countertops typically run higher due to labor premiums and delivery logistics, often 5–12% above national averages. The Midwest generally shows mid-range pricing, about 0–8% below coastal levels on material and installation. In the Southeast and Southwest, costs may dip further on materials, but local installation rates can offset savings by 3–6%. Always confirm a written estimate that breaks out material, fabrication, and installation to compare apples-to-apples across regions.

Labor, Hours & Rates

Labor time depends on layout complexity and crew efficiency. A standard kitchen installation may take 1–2 days of on-site work for a straightforward layout, with a crew of 2–4 skilled tradespeople. In more intricate kitchens, including island detailing or multiple sink cutouts, scheduling may extend to 3–4 days. Typical labor rates range from $60 to $110 per hour per worker, but projects often bill a fixed fabrication and install fee to cover templating, edging, and seam work. Minor adjustments during installation can affect total cost by several hundred dollars.

Real-World Pricing Examples

Concrete scenario snapshots illustrate variation by project scope.