Costs for CertainTeed Presidential Shake roofing vary by roof size, pitch, and regional labor rates. The price typically hinges on material choice, underlayment, and installation complexity, with the main driver being roof area and slope. This guide shows cost ranges in USD and includes per-square-foot estimates and project totals to help buyers budget accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Roof Area | 1,000 sq ft | 2,500 sq ft | 4,000 sq ft | Assumes standard 3:12 pitch |
| Installed Cost (Total) | $10,000 | $22,000 | $38,000 | Includes materials and labor |
| Materials Only | $4,500 | $9,000 | $14,000 | Presidential Shake shingles |
| Labor & Installation | $5,500 | $12,000 | $20,000 | Crew time, tear-off, disposal |
| Per-Sq Ft Range | $6 | $9 | $12 | Material plus labor |
Typical Cost Range
Cost ranges capture common project realities across regions. Typical installed prices for Presidential Shake roofing start around $10,000 for small homes and can exceed $38,000 for larger or steeper roofs. Expect per-square-foot ranges between about $6 and $12, with higher figures for complex roofs, added insulation, or upgraded underlayment. The overall price is driven by roof size, pitch, edge details, and removal needs, plus labor market conditions.
Cost Breakdown
The following table outlines major cost components and example ranges for a mid-size project. The figures assume standard asphalt roofing conditions; unusual shapes or high-pitch sections may shift prices upward.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $4,000 | $8,000 | $14,000 | Shingles, starter, underlayment |
| Labor | $5,000 | $12,000 | $20,000 | Crew hours, removal, installation |
| Equipment | $500 | $1,500 | $3,000 | Rentals, safety gear |
| Permits | $100 | $600 | $1,500 | Local permit fees |
| Delivery/Disposal | $300 | $1,200 | $3,000 | Truck access, haul-away |
| Waste & Debris Fees | $100 | $600 | $2,000 | Sampled waste handling |
Pricing Variables
Several factors shape the final price for Presidential Shake installations. Roof size and pitch are primary drivers; steeper roofs add labor time and safety costs. Material selection, such as shake design options or premium underlayment, can shift pricing by several thousand dollars. Local labor markets and disposal costs also contribute noticeable deltas between regions and contractors. Supply chain timing and weather windows may influence scheduling and total costs.
Ways To Save
Cost-saving paths include choosing standard colorways and avoiding custom trim orders. Bundling disposal with tear-off contracts and negotiating bundled labor packages can reduce overhead. Verifying current warranty terms and requesting a single-solution estimate helps avoid hidden line items.
Regional Price Differences
Prices can vary by geography. In the Northeast urban markets, expect higher labor and permitting costs, while the Midwest may show moderate rates and strong competition. The Southeast often yields lower material transport charges but can incur weather-related delays. Budget deltas of roughly ±15% to ±25% are common when comparing Urban, Suburban, and Rural areas for Presidential Shake projects.
Labor & Installation Time
Labor costs reflect crew size and project duration. A typical installation might require 2–4 days on a mid-size home with a standard crew. Larger or custom-edged roofs can extend to a full week. The estimate should include tear-off, disposal, and clean-up. Longer installation times raise daily crew rates and total project spend.
Additional & Hidden Costs
Hidden fees may arise from drainage improvements, ice dam protection, or upgraded ventilation. Some contractors bill for extra underlayment, metal flashings, or specialty ridge caps. Unexpected structural repairs discovered during tear-off can significantly affect total costs. Always require a breakdown before signing.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes for different project scopes. Basic involves a small home with standard pitch and standard colors; Mid-Range adds upgraded underlayment and a larger roof; Premium uses premium color options, additional insulation, and complex detailing.
Basic scenario: 1,400 sq ft, standard pitch, basic underlayment. Installed price range: $9,500–$14,000. Labor hours: 14–22; Total per sq ft: $6.8–$10.0. Assumptions: region, standard material package, no major repairs.
Mid-Range scenario: 2,200 sq ft, moderate pitch, enhanced underlayment and starter. Installed price range: $16,000–$26,000. Labor hours: 28–40; Total per sq ft: $7.3–$11.8. Assumptions: typical suburban market, average access, no structural issues.
Premium scenario: 3,000 sq ft, high pitch, premium color and extra venting. Installed price range: $28,000–$38,000. Labor hours: 40–60; Total per sq ft: $9.3–$12.7. Assumptions: urban market, difficult access, enhanced warranty.
Assumptions: region, specs, labor hours.