Homeowners typically pay between $200 and $900 to replace a kitchen faucet, with most projects landing around $350–$600 depending on faucet style and installation complexity. The main cost drivers are faucet type, labor time, and any additional parts or permits required.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| faucet price | $60 | $180 | $500 | New faucet quality varies widely |
| Labor | $60 | $180 | $420 | Includes removal, install, testing |
| Materials & parts | $20 | $60 | $120 | New supply lines, connectors |
| Disposal & travel | $20 | $40 | $60 | Trash haul, service area |
| Accessories | $10 | $40 | $100 | Aerators, soap dispenser, escutcheon |
| Total project | $200 | $350 | $900 | Assumes standard single-handle or dual-handle faucet |
Overview Of Costs
Typical cost range for changing a kitchen faucet spans $200–$900, with most projects around $350–$600. The Assumptions: regional labor rates, standard under-sink setup, no structural repairs. Price depends on faucet type, installation time, and any incidental plumbing work.
Costs include faucet hardware, labor to remove the old unit, install the new one, connect lines, test for leaks, and cleanup. Per-unit estimates help when comparing options: labor commonly falls in the $60–$120 per hour band, and faucet prices vary by material and finish.
Cost Breakdown
| Column | Materials | Labor | Equipment | Delivery/Disposal | Accessories | Taxes | Subtotal |
|---|---|---|---|---|---|---|---|
| Low | $60 | $60 | $0 | $20 | $10 | $0 | $150 |
| Average | $180 | $120 | $40 | $40 | $40 | $0 | $420 |
| High | $500 | $260 | $120 | $60 | $100 | $0 | $1,060 |
data-formula=”labor_hours × hourly_rate”> Labor time varies by faucet type. For a standard single-handle, expect 1–2 hours; for a pull-down or composite unit, 2–3 hours. Heavy-duty repairs or valve replacement can extend time beyond the typical range.
What Drives Price
Key factors include faucet type (single-handle, dual-handle, pull-down, pull-out), finish (chrome, brushed nickel, oil-rubbed bronze), and the length and complexity of supply lines. Regional labor rates influence totals, as do under-sink access and existing valve condition.
Two niche drivers to consider: (1) Faucet type and mounting complexity (e.g., high-arc models with solid brass body may add $50–$180 in parts and $60–$180 in labor), (2) Valve and supply line upgrades if old lines leak or corrode, often adding $40–$150 in materials plus 1–2 extra hours of labor.
Regional Price Differences
Prices show regional variation. In the Northeast, expect a 5–15% premium versus the Midwest; in the West, similar ranges apply. Rural areas may see 5–20% lower labor costs than urban settings due to fewer crews and travel time.
Regional deltas are typical for total projects: Low-cost markets around $260–$360; Mid-range markets $380–$700; High-cost markets $800–$1,000+ for premium fittings and complex installs.
Labor, Hours & Rates
Labor is the largest variable. Typical hourly rates run $60–$120, with time estimates: 1–2 hours for standard installs, 2–3 hours for pull-downs, and 3–5 hours if valve replacement or extra carpentry is needed. Expect 1–2 hours for removal and 1–3 hours for install depending on access.
Formula reference: data-formula=”labor_hours × hourly_rate”>. If the job requires extra fittings or adapters, factor in $10–$60 per item.
Additional & Hidden Costs
Hidden costs may include upgrading shut-off valves, replacing lines under the sink, or installing a new escutcheon plate. Expect an extra $20–$100 for accessories and $40–$150 for line upgrades if leaks or corrosion are found.
Imports from third-party vendors can add shipping or handling charges if the faucet is special-order. Some jurisdictions may require minor permit considerations for remodeling work, though kitchen faucet changes typically do not require permits.
Real-World Pricing Examples
Basic — Standard chrome single-handle faucet, no valve replacements. Assumes 1.5 hours labor at $90/hour; faucet $70; connectors $15; disposal $25. Total: about $260. Assumptions: standard install, city-area labor rate.
Mid-Range — Pull-down faucet, brushed nickel, with new supply lines and escutcheon. 2 hours labor at $100/hour; faucet $180; lines $50; escutcheon $20; disposal $40. Total: about $510.
Premium — High-arc, commercial-grade stainless faucet with integrated spray and filtration, plus two valve upgrades. 3 hours labor at $120/hour; faucet $350; lines $80; valves $120; disposal $50; accessories $60. Total: about $1,060.
Assumptions: region, faucet spec, labor hours.