Homeowners typically pay a broad range to fix a kicked-in door, often from a few hundred to several thousand dollars depending on damage, door type, and installation needs. The main cost drivers are frame damage, hardware replacement, weatherproofing, and labor.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door repair or replacement | $150 | $600 | $2,000 | Frame repair, door slab, or full door replacement |
| Labor (installation/repair) | $80 | $200 | $450 | Per hour or per project; varies by region |
| Materials (hardware, new door) | $50 | $300 | $1,200 | Includes hinges, latch, weatherstripping |
| Frame repair or replacement | $100 | $600 | $1,800 | Structural framing and shims as needed |
| Permits & codes checks | $0 | $100 | $400 | Only in some jurisdictions |
| Delivery/Disposal | $0 | $50 | $150 | Waste removal or material haul-off |
Overview Of Costs
Cost ranges reflect door type, frame integrity, and labor hours. Typical jobs include assessing damage, ordering parts, and completing installation. For a standard steel or fiberglass door with minor frame damage, expect mid-range costs around $600-$1,200. If the frame is warped or the door is hollow-core with significant damage, totals often reach $1,200-$2,000 or more.
Cost Breakdown
The following table aggregates common cost components for fixing a kicked-in door. It shows totals and per-unit estimates where applicable. Assumptions: region, specs, labor hours.
| Component | Low | Average | High | Units | Notes |
|---|---|---|---|---|---|
| Materials | $50 | $300 | $1,200 | $- | Hardware, door slab, weatherstripping |
| Labor | $80 | $200 | $450 | hours | Hours multiplied by local rate |
| Frame Repair | $100 | $600 | $1,800 | $- | Structural repairs if needed |
| Permits | $0 | $100 | $400 | permit | Some jurisdictions require checks |
| Delivery/Disposal | $0 | $50 | $150 | job | Waste removal or material haul-off |
What Drives Price
Key price levers include frame integrity, door type, and installation complexity. A kicked-in door may require frame alignment, hinge reinforcement, or a new jamb. Niche requirements such as security-grade hardware or weather sealing add cost. Door materials differ in price: steel around $200-$600, fiberglass $250-$1,000, wood $150-$800 for slab components.
Regional Price Differences
Costs vary by market. In urban West Coast cities, expect higher labor rates and disposal fees, while rural areas may be lower but with longer wait times for parts. Typical deltas relative to national averages: West Coast +10% to +20%, Midwest -5% to +5%, South +0% to +10%.
Labor & Installation Time
Most door repairs take 2–6 hours, depending on damage severity and accessibility. data-formula=”labor_hours × hourly_rate”> Typical hourly rates: $60–$120, with journeyman specialists at the upper end. For complex frame repair, time and labor can push total toward the high end, especially when re-seating the door and adjusting latches.
Additional & Hidden Costs
Hidden costs may include expedited ordering fees, additional weatherproofing, and hidden water damage behind the frame. If the door frame is compromised, expect extra framing lumber and nails. Assume a 10–20% contingency for unforeseen issues not visible at inspection.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes. Assumptions: region, specs, labor hours.
- Basic Repair — steel door, minor frame warp, standard latch. Materials $50, labor 2 hours at $90, hardware $60, disposal $0. Total: $320-$520.
- Mid-Range Fix — fiberglass door, moderate frame damage, weatherproofing added. Materials $250, labor 4 hours at $110, hinges $40, weatherstripping $70, disposal $25. Total: $700-$1,150.
- Premium Replacement — wood or composite door, substantial frame repair, security hardware, full weather sealing. Materials $600, labor 6 hours at $120, new jamb $150, hardware $200, disposal $60. Total: $1,500-$2,200.