Homeowners typically pay between $350 and $1,100 to reglaze a sink, with most projects landing in the $550–$900 range depending on material, condition, and labor. The main cost drivers are the sink material, the prep required, the number of sinks, and any add-ons like upgrades or repairs. The cost is influenced by whether the project involves a ceramic, porcelain, or stainless steel sink and the extent of surface damage.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Sink Reglazing Service | $350 | $550 | $1,100 | Includes surface prep, priming, coating, and sealant |
| Materials (Coating, Primers) | $40 | $120 | $260 | Quality epoxy or acrylic coatings vary by brand |
| Labor (Hours) | 2 | 4 | 6 | Assumes a single basin, standard size |
| Repairs/Prep Turnaround | $0 | $80 | $180 | Patch chips or cracks before coating |
| Permits/Fees | $0 | $0 | $0 | Typically not required for residential reglazing |
Overview Of Costs
Typical cost ranges include project totals and per-unit equivalents. For a standard bathroom sink, expect a total project range of $350–$1,100, with per-sink equivalents around $2–$6 per square inch of surface treated, depending on the coating and prep needs. Assumptions: single sink, standard dimensions, mid-range coating, no structural repairs. Assumptions: region, specs, labor hours.
Cost Breakdown
Understanding the components helps compare quotes accurately. The following table shows key cost drivers and typical values for a single-sink reglaze job. The figures assume mid-range materials and standard prep; regional pricing may shift these numbers.
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Overhead | Contingency |
|---|---|---|---|---|---|---|---|
| $40–$120 | $150–$420 | $20–$60 | $0 | $0–$20 | $20–$80 | $0–$60 | $0–$80 |
data-formula=”labor_hours × hourly_rate”> Labor is commonly the largest variable. Typical hourly rates in the U.S. are $45–$90, with total labor reflecting 2–6 hours depending on sink size and prep work required.
What Drives Price
Material quality and surface condition are major price levers. The coating type (high-build epoxy vs. standard) and the need to repair chips, cracks, or edge damage can add $80–$300 to the base cost. If the sink is unusual in size or shape, or requires more extensive surface prep, expect higher pricing.
Ways To Save
Smart planning can reduce total expenditure. Schedule during off-peak seasons, request quotes for multiple coatings, and ask about bundled services (countertop refinishing in the same visit). Ensure the project includes proper curing time to avoid premature wear, which could lead to rework costs later.
Regional Price Differences
Prices vary by region and market conditions. In the Northeast, expect a slight premium due to higher labor costs; the Midwest generally trends lower; the West often lands mid-to-high due to material costs. Typical regional deltas are ±15% relative to national average for a standard reglaze job.
Labor, Hours & Rates
Labor costs are a major component of the total price. A typical single-sink reglaze job uses 2–6 hours of work, influenced by the sink’s material, countertop access, and any required repairs. Regional wage differences can shift the final quote by roughly 30–40% between high-cost cities and rural areas.
Additional & Hidden Costs
Be aware of potential extras that can appear in quotes. Some contractors add a surcharge for edge refinishing, extra coats for gloss levels, or expedited timelines. If heavy rust, granite, or composite sink materials are involved, expect higher overhead and longer cure times. Assumptions: region, specs, labor hours.
Real-World Pricing Examples
Practical scenarios help set expectations. Below are three sample quotes for different sink types and conditions. They combine total project ranges with per-unit notes to illustrate pricing structure.
Basic Scenario
Scope: Standard porcelain single basin, light surface wear, no repairs. Labor 2–3 hours. Materials: mid-range epoxy.
Estimated: $350–$550 total; $175–$275 material cost; $100–$180 labor.
Mid-Range Scenario
Scope: Porcelain or fiberglass sink with minor chips; includes light prep and two-coat finish. Labor 3–4 hours. Materials: better coating with sealant.
Estimated: $550–$800 total; $120–$180 materials; $260–$420 labor.
Premium Scenario
Scope: Ceramic or stainless steel with multiple chips repaired; high-gloss finish; premium coating.
Estimated: $800–$1,100 total; $200–$260 materials; $420–$700 labor.
Maintenance & Ownership Costs
Reglazing typically offers several years of service before recoat is needed. A reglaze can extend the life of a worn sink by 5–10 years, depending on use and care. Routine cleaning with non-abrasive products helps preserve gloss and prevent premature wear.
Seasonality & Price Trends
Timing can influence cost variability. Demand tends to rise in spring and early summer when home improvement projects peak. Some contractors offer discounts in late fall or winter to fill schedules.
FAQ
Common price questions answered here. Do reglazes require removal? Most services are performed in place; some setups may require temporary fixture removal. How long does curing take? Typically 24–48 hours for initial handling, with full cure across 3–5 days.