Buying an interior door replacement typically costs between $150 and $900 per unit, with overall project prices ranging from $350 to $1,900 depending on door type, size, and labor. The main cost drivers are door material, finish, hinge and hardware quality, and whether trimming or framing work is required.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door (solid/core, hollow, or prehung) | $100 | $250 | $600 | Standard 6’8″ x 28–32″ sized doors vary by material. |
| Hardware (latch, knobs, hinges) | $20 | $60 | $180 | Includes 2–3 hinges and a matching latch. |
| Labor (removal + install) | $100 | $250 | $700 | Time depends on door type and framing needs. |
| Finish/paint or stain | $50 | $150 | $350 | Drying & prep included where needed. |
| Hardware installation & trim work | $40 | $100 | $200 | In some cases, trim is reused. |
| Delivery/Dispose old door | $20 | $60 | $150 | Includes haul-away if chosen. |
| Totals (per door) | $330 | $970 | $2,230 | Assumes standard sizing; multiple doors increase costs. |
Overview Of Costs
Cost ranges are commonly $350-$1,900 for a single interior door replacement in the United States, depending on material and labor. When a prehung or new frame is required, totals trend higher. For homeowners replacing multiple interior doors, per-door pricing often falls modestly due to bulk ordering of hardware and coordinated scheduling. Assumptions: region, door size, and labor hours.
Cost Breakdown
The breakdown below shows typical components and how each contributes to the total. Solid-core interior doors generally cost more than hollow-core, and prehung doors with frames add both material and labor. A mini formula can estimate labor: data-formula=”labor_hours × hourly_rate”>.
| Materials | Labor | Hardware | Delivery/Disposal | Finishing | Subtotal |
|---|---|---|---|---|---|
| Door (solid core or specialty) | $100-$400 | Hinges, latch: $20-$60 | Included or $20-$60 | $50-$150 | $320-$820 |
| Door (hollow core or prehung) | $60-$200 | $20-$60 | $0-$40 | $0-$50 | $100-$350 |
| Finish/paint/stain | $0-$0 | $0-$0 | $0-$0 | $50-$150 | $50-$150 |
| Subtotal per door | $120-$970 | ||||
What Drives Price
Prices vary by door material, size, and installation complexity. Material type and door weight influence both hardware needs and labor time. A common threshold is the difference between hollow-core doors and solid-core doors, which can add $100-$350 to the door cost alone. For doors with prehung frames, expect additional framing work and potential trim adjustments, typically $50-$200 extra per unit. Labor rates in urban areas can be 15–25% higher than rural areas.
Factors That Affect Price
Door type matters most: hollow-core doors are cheaper; solid-core or engineered wood doors cost more but are more durable. Fire-rated doors, glass panels, and decorative panels increase both material and installation time. The door size and the existing frame condition influence trim, shimming, and potential adjustments. Assumptions: standard 6’8″ height; frame in good condition.
Ways To Save
To lower costs, consider hollow-core doors, standard sizes, and DIY finish work if feasible. Bulk purchases for multiple doors, shopping during off-peak seasons, and choosing commonly stocked sizes reduce delivery delays and price spikes. Getting a precise price requires an in-home measurement for door width, height, and hinge placement. If you can reuse old trim or hinges, total costs drop further. Labor hours can be reduced by using prehung doors; DIY finishing can trim finishing costs.
Regional Price Differences
Prices vary across the U.S. due to labor markets and material costs. In the table below, three regions show typical deltas relative to a national baseline. Urban pricing can be 10–20% higher than suburban pricing, while rural pricing may be 5–15% lower.
- Coastal Metropolitan: higher labor rates; hollow-core doors often $150-$300 lower than solid-core equivalents when not prehung.
- Midwest Suburban: balanced costs; a standard prehung solid-core door averages $350-$700 total.
- Rural Southeast: lower installation rates; hollow-core doors provide the best cost-to-durability ratio, totaling $250-$500 per unit.
Real-World Pricing Examples
Three scenario cards illustrate typical quotes in common setups. Prices assume standard doors, no custom milling, and typical installation teams. All quotes include minimal disposal and normal lead times.
- Basic — Hollow-core door, no prehung frame, standard hardware, minimal trim. Specs: 6’8″ x 30″, basic latch. Labor: 2–3 hours. Materials: $100–$180. Labor: $120–$220. Total: $320–$520. $/door: $100–$180.
- Mid-Range — Solid-core door, prehung frame, upgraded hardware, light finish. Specs: 6’8″ x 32″, reinforced frame. Labor: 3–4 hours. Materials: $180–$350. Labor: $180–$320. Finish: $50–$150. Total: $420–$970. $/door: $120–$275.
- Premium — Fire-rated solid-core with decorative panels, custom stain, high-end hardware, professional trim. Specs: 6’8″ x 36″, heavy frame. Labor: 4–6 hours. Materials: $300–$600. Hardware: $100–$180. Finish: $150–$300. Trim/Disposal: $60–$140. Total: $1,000–$2,230. $/door: $300–$600.
Assumptions: region, specs, labor hours.