Homeowners typically spend between $8,500 and $22,000 to replace stucco with siding, with wide variation based on material choice, wall area, and removal work. The main cost drivers are old stucco removal, siding type, and labor for installation and finishes. Below is a practical, price-focused breakdown to help budget and compare options.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Starter project scope | $6,000 | $12,000 | $20,000 | One-story, moderate area |
| Siding material | $2.50/sf | $7.00/sf | $15.00/sf | Vinyl to fiber cement or wood |
| Stucco removal & disposal | $1.50/sf | $4.50/sf | $8.50/sf | Includes disposal |
| Labor (installation) | $4.00/sf | $9.00/sf | $16.00/sf | Includes fasteners, flashing |
| Permits & codes | $200 | $1,000 | $3,000 | Local requirements vary |
| Repairs & prep | $0.50/sf | $2.50/sf | $6.00/sf | Sheathing, moisture barrier |
| Delivery & disposal | $100 | $500 | $1,500 | Trash removal, debris handling |
| Warranty & aftercare | $0 | $300 | $1,200 | Limited vs full coverage |
| Taxes & overhead | $300 | $1,200 | $3,000 | Regional tax impact |
Assumptions: region, wall area, material selection, labor hours, and typical removal scope.
Overview Of Costs
Cost ranges to replace stucco with siding vary by material and project complexity. For a typical 1,800–2,400 square foot home, total project ranges in real-world bids often fall between $12,000 and $28,000, including removal, materials, and labor. Material choice is the largest swing factor: vinyl siding is usually the least expensive, while fiber cement and wood options push totals higher due to material and specialized installation needs.
Cost Breakdown
The following table outlines core cost components with assumed ranges and unit measures. The per-square-foot figures help approximate budgets for different home sizes and siding choices. Removal and prep are essential; skipping moisture barriers leads to long-term risk and higher future costs.
| Component | Units | Low | Average | High | Assumptions |
|---|---|---|---|---|---|
| Siding Material | $/sf | 2.50 | 7.00 | 15.00 | Vinyl, fiber cement, wood; 1,800–2,000 sf |
| Removal & Disposal | $/sf | 1.50 | 4.50 | 8.50 | Solid stucco; includes disposal |
| Labor (Installation) | $/sf | 4.00 | 9.00 | 16.00 | Crew costs; weather considerations |
| Permits | Flat | 200 | 1,000 | 3,000 | Depends on locality |
| Moisture Barrier & Wrapping | $/sf | 0.50 | 1.50 | 3.50 | House wrap type matters |
| Finish & Trims | $/sf | 0.50 | 1.50 | 4.00 | Soffits, corner boards, shutters |
| Delivery & Debris | Flat | 100 | 500 | 1,500 | Trash and materials handling |
| Warranty/Support | Flat | 0 | 300 | 1,200 | Labor or material coverage |
data-formula=”labor_hours × hourly_rate”>
What Drives Price
Material choice has the biggest impact: vinyl is typically $2.50–$8.00 per square foot, while fiber cement runs $8–$14 per square foot, and wood products can exceed $12 per square foot. Removal scope varies with stucco thickness, embedded anchors, and any underlying damage; more extensive repairs increase both material and labor costs. Other drivers include wall height, accessibility, and window/door openings that complicate flashing and integration.
Labor, Hours & Rates
Labor rates for siding installation commonly range from $40 to $85 per hour, depending on region and crew expertise. A typical replacement of 1,800–2,000 square feet may require 3–5 days for a two-person crew, plus preparation and cleanup. Estimating labor time precisely helps avoid budget overruns.
Regional Price Differences
Prices vary across the U.S. Three representative patterns: Urban, Suburban, and Rural. Urban markets tend to be about 10–20% higher due to labor demand and material transport; Suburban areas often sit near the national average; Rural areas can be 5–15% lower but may incur higher freight or limited local contractor options. Regional deltas should be factored into preliminary quotes.
Accessories, Extras & Hidden Costs
Extras can alter the bottom line: weather delays, re-sheathing, mold or water damage repairs, specialty trim, and upgraded flashing. Permits and inspections can account for a non-trivial portion of the budget in some jurisdictions, while small callbacks for sealant and paint touch-ups add minor long-term costs.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes for different project scopes. All include removal of stucco and full siding replacement with new weather barriers.
Basic: Vinyl Siding, Standard Prep
Specs: 1,800 sf, single-story, no major repairs. Labor: 3 workers, 4 days. Materials: vinyl, standard barrier. Totals: $12,000–$15,000 ($6–$8/sf). Assumptions: mild weather and standard access.
Mid-Range: Fiber Cement, Moderate Repairs
Specs: 2,100 sf, two-story sections, minor sheathing repairs. Labor: 4 workers, 5–6 days. Materials: fiber cement, upgraded barrier, trimmed openings. Totals: $20,000–$26,000 ($9–$12/sf). Assumptions: typical regional costs; local permits included.
Premium: Wood Siding, Extensive Prep
Specs: 2,400 sf, two stories, large window openings, significant moisture damage repair. Labor: 5 workers, 7–9 days. Materials: wood siding, premium barrier, high-end trim. Totals: $30,000–$42,000 ($12–$17/sf). Assumptions: specialty finish and longer commissioning process.
Budget Tips
Obtain multiple detailed quotes that break out materials, removal, labor, and permits. Compare manufacturers’ warranties and contractor reputation. Consider seasonal pricing patterns: off-peak seasons may yield modest savings and plan for weather-related delays in spring and fall. Ask about a staged approach if full replacement strains the budget; partial updates can still improve performance and curb appeal.