The cost to replace vinyl siding with brick varies widely by house size, brick type, and labor. Most projects hinge on removing old siding, selecting brick veneer versus full brick, and any foundation or flashing work required to support brick features. Understanding these cost drivers helps builders estimate a realistic budget before signing a contractor agreement.
Summary table follows the introduction, showing typical ranges for common cost items and notes on assumptions.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Removal of vinyl siding | $1,500 | $3,000 | $6,000 | Exterior surface prep included in most jobs |
| Brick veneer materials (per sq ft) | $4 | $9 | $16 | Includes mortar and basic accents |
| Labor for framing, weather barrier, and installation (per sq ft) | $8 | $13 | $25 | Hours vary by complexity |
| Full brick veneer or brick-on-brick (per sq ft) | $10 | $18 | $32 | Assumes brick veneer with standard bond |
| Permits and inspections (flat) | $100 | $600 | $1,800 | Depends on locality |
| Delivery/haul-away (materials waste) | $300 | $1,200 | $2,500 | Depending on distance and debris |
Overview Of Costs
Assumptions: region, siding area around 1,800–2,200 sq ft, standard brick veneer, no major structural work.
Overview Of Costs
Total project range: A typical Home exterior project replacing vinyl with brick veneer generally runs from about $18,000 to $45,000 for a standard 1,800–2,000 sq ft house. For full brick or higher-end brick types, total costs can push toward $35,000 to $70,000 or more depending on wall area and mortar details. These ranges reflect both material choices and regional labor variations. The per-square-foot price often falls between $9 and $25 for veneer installations, with full brick projects tending to be higher at $18–$32 per sq ft.
Per-unit ranges: Veneer installed typically $9–$18 per sq ft (materials plus labor), while labor-only rates can be $6–$15 per sq ft in some markets. In addition, removing old vinyl commonly adds $1,500–$6,000 depending on siding length and accessibility. Assumptions: standard two-story home, accessible walls, no unusual foundation work.
Cost Breakdown
| Category | Low | Average | High | Assumptions | Notes |
|---|---|---|---|---|---|
| Materials | $4,000 | $14,000 | $28,000 | Brick veneer; decorative accents | $/sq ft and brick type vary |
| Labor | $8,000 | $15,000 | $28,000 | Framing, weather barrier, brick application | Higher for taller walls or complex corners |
| Delivery/Disposal | $300 | $1,500 | $3,000 | Material logistics, debris removal | Includes dumpster or haul-off |
| Permits | $100 | $600 | $1,800 | Local code compliance | Can be higher in urban zones |
| Removal of vinyl | $1,500 | $3,500 | $6,000 | Old siding tear-off | May require asbestos check in rare cases |
| Miscellaneous | $600 | $2,000 | $5,000 | Flashing, sealants, caulking | Adjust for specialty details |
Where The Money Goes
Key drivers include wall area, brick type (veneer vs full brick), and accessibility for crew. For instance, larger homes or walls exceeding 2,000 sq ft increase material and labor costs substantially. A brick veneer project with standard mortar and a simple accent pattern typically costs less than a full-brick installation with thicker walls and more complex bond patterns.
Factors That Affect Price
Project size and scope dominate pricing: larger homes raise both material and labor costs. Wall complexity, such as multiple corners, arches, or high gables, increases time and waste.
Brick type and installation method: veneer costs depend on brick face selection and mortar joints; full brick adds significant weight, foundation considerations, and structural work. Mortar color and repointing needs also influence ongoing maintenance costs.
Region and contractor availability: urban markets tend to have higher labor rates, while rural areas may show more variable lead times. Permitting rules differ by jurisdiction and can affect schedule and price.
Ways To Save
Effective planning and phased work can reduce upfront disruption and allow budgeting adjustments.
Choose veneer over full brick for substantial savings in material weight, labor, and foundation needs.
Efficient design choices: limiting the number of custom arches or decorative features lowers time on site and material waste.
Regional Price Differences
Three-region comparison shows how location shifts pricing. In the Midwest, a veneer job may land near the average, while the West and Northeast often see higher rates for labor and materials. In Rural areas, costs can dip due to lower labor rates but rise if shipping materials is costly. The following illustrates typical deltas: Midwest baseline; Urban West +12% to +22%; Urban Northeast +8% to +18%; Rural areas -5% to +5% relative to national average.
Labor & Installation Time
Install time and crew costs depend on wall count, height, and access. A 1,800–2,000 sq ft, two-story home may require 2–4 weeks of work with a crew of 3–6, affecting overall cost through labor hours. A mini formula tag can help: data-formula=”labor_hours × hourly_rate”>
In typical projects, labor rates range from $40 to $60 per hour in many markets, with higher rates for specialty brickwork or expedited timelines.
Real-World Pricing Examples
Scenario cards provide practical guidance for budgeting.
Basic: 1,800 sq ft, veneer, standard bond, medium complexity. Labor 120–180 hours; materials $6,000–$12,000; total $18,000–$28,000; per sq ft $10–$16.
Mid-Range: 2,000 sq ft, veneer with accents, some corners. Labor 180–260 hours; materials $10,000–$18,000; total $28,000–$40,000; per sq ft $12–$20.
Premium: 2,200 sq ft, full brick veneer, intricate detailing. Labor 240–320 hours; materials $14,000–$28,000; total $42,000–$70,000; per sq ft $19–$32.
Maintenance & Ownership Costs
Long-term considerations include maintenance for brick joints, tuckpointing intervals, and potential repointing every 20–25 years. A brick exterior often requires occasional masonry attention but can offer durable performance compared to vinyl over decades.
Five-year cost outlook suggests maintenance cycles and occasional repointing costs that may add several thousand dollars, depending on local climate and brick quality.
Price At A Glance
Quick take: Replacing vinyl with brick veneer typically costs $18,000–$45,000 for standard homes; full brick can push $35,000–$70,000 or more. Expect veneer materials around $9–$18 per sq ft plus $6–$15 per sq ft for labor, with removal and permits adding $1,600–$7,800 overall.
Builders should confirm wall area, chosen brick type, and local permit requirements to refine estimates. Assumptions: standard home, no major structural work, accessible walls.