Homeowners typically pay for a dishwasher control board replacement to restore full function. The overall cost depends on board type, model compatibility, labor time, and parts availability. This guide provides cost estimates, price ranges, and practical tips to budget for the upgrade.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Control Board | $60 | $180 | $350 | OEM vs aftermarket varies by model |
| Labor | $70 | $130 | $250 | 1–3 hours typical; more for difficult access |
| Delivery / Parts Handling | $0 | $15 | $40 | Includes shipping or trip charges |
| Taxes / Fees | $0 | $15 | $40 | Based on local rates |
| Totals (Typical Project) | $130 | $330 | $680 | Assumes standard 1–3 hour service call |
Overview Of Costs
Typical cost range for a dishwasher control board replacement spans from about $140 to $680, depending on board type, model compatibility, and labor. The per-unit price for the board itself commonly ranges from $60 to $350, with labor accounting for the majority of the variability.
Assumptions: region, model compatibility, labor hours.
Cost Breakdown
| Component | Low | Average | High | Notes | Unit |
|---|---|---|---|---|---|
| Materials | $60 | $180 | $350 | OEM board vs aftermarket options | $ |
| Labor | $70 | $130 | $250 | Technician time, diagnostics | $/hour |
| Delivery / Parts Handling | $0 | $15 | $40 | Shipping or trip charges | $ |
| Permits | $0 | $0 | $0 | Not typically required for residential repairs | $ |
| Contingency | $10 | $25 | $60 | Extra parts or re-work | $ |
| Taxes | $0 | $15 | $40 | Local tax rate varies | $ |
| Estimated Total | $130 | $330 | $680 | Ranges reflect several common scenarios | $ |
What Drives Price
Key price drivers include the board type (OEM vs aftermarket), model compatibility (newer or high-end models often cost more), and labor complexity (difficulty accessing the control module or water inlet components). A common ceiling occurs when diagnostic time reveals multiple interrelated failures beyond the control board, raising both parts and labor costs.
Factors That Affect Price
Specific pricing factors to watch: board warranty length, availability of the exact model, and your geography which influences service call charges. Digital diagnostics may be included in some estimates as a separate line item. data-formula=”labor_hours × hourly_rate”>
Regional Price Differences
Prices vary by region and market density. In urban areas, expect higher labor rates but more rapid availability of parts, while rural areas may see longer wait times and travel fees. Typical regional deltas versus national averages: Northeast +5% to +15%, Midwest near parity to +5%, West Coast +10% to +20%.
Labor, Hours & Rates
Most replacements take 1–3 hours of on-site labor. Labor rates typically range from $70 to $130 per hour, with a few technicians charging more for complex access or after-hours work. Estimate a separate diagnostic fee if the technician issues one, though some shops waive it with the replacement.
Additional & Hidden Costs
Surprises can include shipping delays for OEM boards, reflow or reprogramming needs, or additional seals and connectors that must be replaced. Some repairs require a bottom panel removal or a full dishwasher stand replacement, which adds time and parts. Always ask for a written estimate with line items to avoid hidden charges.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes based on model type and access.
Basic — OEM board, straightforward access, standard model. Specs: 1½ hours labor, parts include board and standard connectors. Total: $140-$190. Assumptions: regional pricing near national average.
Mid-Range — Aftermarket board, compatible with mid-tier model, moderate access. Specs: 2 hours labor, board + connectors. Total: $250-$320.
Premium — OEM board, high-end model, tight access or additional seals required. Specs: 2–3 hours labor, board + parts + possible reprogramming. Total: $420-$680.
Assumptions: region, model compatibility, labor hours.