Prices for double front entry doors typically span from a modest setup to premium installations. The exact cost depends on door material, glass options, hardware, and whether a full frame or rough opening needs remodeling. The main cost drivers are door material, insulation and energy ratings, finishing options, and installation complexity. The article highlights cost ranges and practical pricing to help with budgeting for a standard U.S. home.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Doors (2 exterior units) | $800 | $2,000 | $5,000 | Materials vary by material (steel, fiberglass, wood); includes pre-hung units |
| Framing & Prep | $400 | $1,200 | $3,000 | Rough opening enlargement or adjustments may be required |
| Hardware & Finishes | $150 | $800 | $2,000 | Hinges, locks, handles, weatherstripping, interior trim |
| Installation | $500 | $1,800 | $4,500 | Labor hours, crew size, and access affect cost |
| Permits & Inspections | $50 | $250 | $1,000 | Depends on local code and project scope |
Assumptions: region, door type, frame work, and labor hours influence the ranges.
Overview Of Costs
The typical project for adding a set of double front entry doors ranges from about $3,000 on a budget to $12,000 or more for premium materials and elaborate finishes. A common mid-range budget lands around $5,000-$8,000 including installation. Pricing is driven by door material, glass and energy features, installation complexity, and local labor rates.
Cost Breakdown
The table below frames a three-tier view using a consistent structure. It blends total project ranges with per-unit considerations, and shows basic assumptions that affect each tier. data-formula=”labor_hours × hourly_rate”>
| Tier | Materials ($) | Labor ($) | Permits ($) | Delivery/Disposal ($) | Contingency ($) | Total ($) |
|---|---|---|---|---|---|---|
| Basic | 600–1,100 | 400–900 | 0–50 | 50–150 | 100–200 | 1,150–2,400 |
| Mid-Range | 1,200–2,800 | 900–1,600 | 50–200 | 150–350 | 200–500 | 2,500–5,450 |
| Premium | 3,000–6,000 | 1,500–3,000 | 100–400 | 300–700 | 400–1,000 | 5,300–11,100 |
Assumptions: standard double doors, mid-range installation crew, and typical weather considerations.
What Drives Price
Key variables include door material, glass and insulation options, and installation complexity. Steel and fiberglass doors are typically less expensive than solid wood for exterior use, yet offer different aesthetics and performance. Thicker door slabs and energy-rated glass increase both material and fabrication costs. Hinges, multi-point locks, and advanced weatherstripping add to hardware costs, while the rough opening size and wall condition can affect framing and prep expenses.
Factors That Affect Price
Several practical drivers shape final pricing beyond basic material choice. Regional labor rates and the need for structural modifications can shift costs by a wide margin. A door with impact-rated glass or high-energy performance (low U-factor) typically costs more, while simpler, non-insulated variants reduce price. The installation scope—whether it includes removing an old door, sealing, and leveling—also changes the ledger.
Ways To Save
Budget-friendly paths include selecting standard sizes, choosing durable but affordable materials, and handling some prep work yourself where feasible. Request quotes that itemize materials, labor, and permits to compare apples-to-apples. Seasonal promotions, contractor bundling, or choosing factory-direct configurations can yield meaningful savings. Ensure a qualified installer will handle weatherproofing and code compliance to avoid costly recuts later.
Regional Price Differences
Prices for double front doors vary by region due to shipping, labor markets, and building codes. In the Northeast urban corridors, expect higher installation labor rates and permit costs, averaging about 10–20% above national norms for similar projects. In the Midwest suburban areas, prices tend to align with national averages with modest variations around 5–12%. In rural Southwest markets, material options may be similar, but labor costs can be 5–15% lower, reflecting lower regional wage scales. Choosing a local installer with experience in your climate reduces both upfront and long-term costs.
Labor & Installation Time
Labor costs hinge on crew size, job complexity, and hours spent on framing, weatherproofing, and trim work. Typical installation spans 1–3 days for standard double doors, with smaller crews achieving faster turnarounds. data-formula=”hours × rate”> For a basic installation, expect 8–16 hours of labor at $60–$110 per hour; a mid-range job often runs 16–40 hours at similar rates, and premium setups can exceed 40 hours if extensive carpentry or reframing is needed. Time is money when doors must be custom-fit or integrated with smart hardware.
Additional & Hidden Costs
Hidden add-ons frequently emerge from site-specific conditions. Common items include structural modifications, extended weatherproofing, soundproofing seals, and higher-end glass or decorative panels. Delivery, disposal, and waste removal charges can surprise first-time buyers if not itemized. Warranty extensions and post-install adjustments also contribute to the total. In new construction, rough-opening preparation and shimming may add to both materials and labor, especially with non-standard openings.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes for different preferences and home contexts.
- Basic scenario: pre-hung steel doors with minimal glass, simple hardware, standard sizing. Specs: 6’8″ doors, insulated steel, 1-pane clear glass. Labor 10–18 hours, materials $800–$1,100, total around $1,400–$2,400.
- Mid-Range scenario: fiberglass doors with decorative glass, energy efficiency upgrade, upgraded hardware. Specs: 6’8″ doors, quad-pane glass, medium insulation, weatherstripping. Labor 16–28 hours, materials $1,200–$2,800, total around $2,500–$5,450.
- Premium scenario: solid wood or high-end fiberglass with impact-rated glass, custom trim, premium hardware. Specs: 6’8″ doors, decorative glass, enhanced energy ratings, custom casing. Labor 30–50 hours, materials $3,000–$6,000, total around $5,300–$11,100.
Prices reflect common market ranges with region- and project-specific adjustments. Assumptions: standard rough opening, local permit rules, and typical climate considerations.