Buyers typically pay for Edco metal shingles with a focus on material cost, installation labor, and roof size. The overall cost is driven by shingle gauge, finish, underlayment, roof pitch, and local labor rates. This article presents cost ranges in USD and includes per-unit pricing where relevant to help with budgeting.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Edco metal shingles (materials only, 3–peel finish) | $2.00/sq ft | $4.50/sq ft | $8.00/sq ft | Depends on gauge and color |
| Installation labor (roof-only) | $2.50/sq ft | $4.50/sq ft | $7.50/sq ft | Includes startup, waste handling |
| Underlayment, fasteners, accessories | $0.50/sq ft | $1.50/sq ft | $2.50/sq ft | Color-matched options add cost |
| Permits & inspections | $200 | $600 | $1,200 | Region dependent |
| Removal of old roofing | $1.50/sq ft | $3.00/sq ft | $5.00/sq ft | Asphalt shingles vs. existing metal varies |
Overview Of Costs
Cost estimates for Edco metal shingles cover both materials and installation, with total project ranges often expressed per square foot or per roof area. Typical metal shingle projects run from the low to high continuum as shown, excluding unusual site conditions.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.00/sq ft | $4.50/sq ft | $8.00/sq ft | Gauge, finish, color options |
| Labor | $2.50/sq ft | $4.50/sq ft | $7.50/sq ft | Crew size and roof complexity matter |
| Equipment | $0.20/sq ft | $0.60/sq ft | $1.00/sq ft | Lifts, safety gear |
| Permits | $200 | $600 | $1,200 | Jurisdiction varies |
| Removal & disposal | $1.50/sq ft | $3.00/sq ft | $5.00/sq ft | Old roof type affects cost |
| Delivery & warranty | $0.10/sq ft | $0.40/sq ft | $0.80/sq ft | Warranty terms add value |
Assumptions: region, roof size, pitch, and labor hours.
What Drives Price
Key drivers include shingle gauge (gauge 26–29 is common), finish (painted, coated, or embossed), roof area, and complexity. For Edco metal shingles, higher gauges and premium finishes raise material costs, while steeper pitches increase installation time and safety requirements. Other drivers are underlayment choices, venting, and attic insulation needs which can influence overall pricing.
Pricing Variables
Local market conditions shape both material availability and labor rates. A higher-cost urban market may see installation rates 10–20% above rural areas. In regions with strict permitting or required inspections, permit fees can add 200–1,200 USD per project. Lastly, the roof size, composition of the old roof, and any necessary debris containment systems can add to both labor and disposal costs.
Regional Price Differences
Prices vary by region, with three typical patterns: Urban, Suburban, and Rural. In the Urban Northeast, total bills often land toward the high end due to labor demand and permit fees, while Suburban Midwest tends to be mid-range. Rural Southern markets can show the lowest end of the spectrum, though material shipping costs may offset some savings. Expect ±10–25% deltas across these areas depending on project specifics.
Labor, Hours & Rates
Labor costs commonly range from $2.50 to $7.50 per square foot, depending on crew experience and roof height. A typical 1,500-sq-ft roof might require 15–25 hours of labor for installation, plus an additional 5–10 hours for removal and disposal if needed. data-formula=”labor_hours × hourly_rate”> Accurate budgeting should include a contingency for weather delays.
What About Hidden Costs?
Hidden costs can appear in several forms. Surprises include waste disposal fees beyond standard estimates, additional underlayment or drip edge requirements, and disposal of old architectural elements that cannot be recycled. Some projects also incur extra costs for color-matching fasteners or special trims. Budget for 5–10% contingency to cover these extras.
Real-World Pricing Examples
Three scenario cards illustrate typical Edco metal shingle projects. Each scenario assumes a standard single-story residence with no unusual roof features.
- Basic: 1,200 sq ft roof, standard gauge, basic finish, standard underlayment. Materials: $2.00/sq ft; Labor: $2.50/sq ft; Removal: 0.75/sq ft; Permits: $300. Total: $7,800–$11,400.
- Mid-Range: 1,500 sq ft roof, mid-range gauge and finish, upgraded underlayment, mild pitch. Materials: $3.50/sq ft; Labor: $4.00/sq ft; Removal: $2.50/sq ft; Permits: $600. Total: $16,000–$25,000.
- Premium: 2,000 sq ft roof, premium finish, textured look, enhanced warranty. Materials: $6.00/sq ft; Labor: $6.00/sq ft; Removal: $3.00/sq ft; Permits: $1,000. Total: $32,000–$52,000.
Assumptions: region, specs, labor hours.
Cost Compared To Alternatives
Compared with asphalt shingles, Edco metal shingles generally cost more upfront but offer longer life and lower maintenance. When evaluating, consider the 30–50 year life expectancy, energy savings from reflective finishes, and potential tax incentives or rebates that may apply in some states. A mid-range metal option can replace several asphalt roof cycles while delivering enhanced durability, though it may not suit every architectural style.
Maintenance & Ownership Costs
Ongoing costs include periodic inspections, resealing or repainting of exposed metal, and occasional fastener replacement. While metal shingles resist common issues like rot and insect damage, the apparent finish may require refinishing over time. A 5-year cost outlook shows maintenance accounting for surface wear and fastener checks, with minimal risk of major structural repairs if installed correctly.