Everlast and Hardie siding are popular exterior options in the United States, chosen for durability and aesthetics. This article focuses on the cost, including typical price ranges, and what drives those numbers. Homeowners will find practical estimates for installation, materials, and related expenses to help budget a siding project.
What buyers typically pay for Everlast versus Hardie siding hinges on material choice, project scope, house size, and labor rates. This guide presents clear cost ranges and per unit estimates to support budgeting and comparison, with emphasis on the total project price and the price per square foot.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Everlast Siding (material) | $2.50 | $5.50 | $7.50 | Composite vinyl-like product, varies by finish |
| Hardie Siding (material) | $4.50 | $6.50 | $9.00 | Fiber cement, premium durability |
| Installation Labor | $3.50 | $7.50 | $12.00 | Per sq ft; depends on complexity |
| Materials & Supplies | $0.50 | $2.50 | $4.50 | Fasteners, coatings, trim |
| Delivery/Handling | $150 | $400 | $900 | Depends on distance and order size |
| Labor Time Range | 1.0 | 1.8 | 2.8 | Days or crew-hours per 1,000 sq ft |
| Permits & Inspections | $0 | $200 | $1,000 | Local rules may apply |
Overview Of Costs
Cost ranges for siding projects generally reflect material type, house size, and climate. For a typical 2,000 sq ft home, installed price ranges can be $14,000 on the low end to $34,000 on the high end, with a common midrange around $22,000 to $28,000. Per-square-foot estimates are often shown as $5 to $12 for installed siding, with Everlast tending toward the lower end and Hardie toward the higher end due to fiber cement durability and installation requirements. Assumptions: single-story to mid-size home, standard wall height, normal climate, and standard trim work.
Cost Breakdown
The following table summarizes typical project costs. The totals assume a mid-sized home with average complexity and standard trim. Assumptions: region, siding color, and basic underlayment are standard.
| Category | Everlast Siding | Hardie Siding |
|---|---|---|
| Materials | $2.50-$7.50 per sq ft | $4.50-$9.00 per sq ft |
| Labor | $3.50-$12.00 per sq ft | $4.50-$14.00 per sq ft |
| Equipment | $0.50-$1.50 per sq ft | $0.50-$1.50 per sq ft |
| Permits | $0-$200 | $0-$200 |
| Delivery/Disposal | $150-$400 | $150-$500 |
| Warranty/Coatings | $0-$400 | $0-$600 |
| Contingency | 5-10% of project | 5-12% of project |
What Drives Price
Material characteristics greatly affect price. Everlast is typically a composite vinyl-like product with a lower cost per square foot, but it may require more frequent maintenance in some climates. Hardie fiber cement siding commands a higher upfront material cost because of its durability and resistance to fire, rot, and pests. Install complexity matters as well; multi-story homes, unusual angles, and extensive trim increase labor time and total cost.
Regional Price Differences
Prices vary by region due to labor markets and material shipment costs. In the Northeast and West, installed Hardie tends to be 8-15% higher than the national average due to local labor rates and permit costs. In the Midwest and South, Everlast projects may be 5-12% lower on average due to more temperate climates and contractor availability. Typical deltas range from a 5% to 15% spread between regions, with the fastest payback often seen in areas with lower labor rates and fewer weather-driven repairs.
Labor & Installation Time
Labor is a major driver of total cost. Everlast installations are generally quicker due to lighter panels and simpler cuts, translating to lower labor hours. Hardie installations require careful cutting, fiber cement dust control, and sometimes additional underlayment, which increases hours. For a 2,000 sq ft home, expect roughly 2 to 4 days of crew work for Everlast and 3 to 5 days for Hardie, depending on site conditions. Efficient crews and weather windows reduce total costs.
Additional & Hidden Costs
Hidden costs often appear as waste disposal, permit fees, and window/door trim changes. For both products, runs around corners, penetrations, and replacement of backerboard or sheathing can add 5-15% to the project. In areas with strict fire codes or wind load requirements, Hardie may require additional bracing or specialty fasteners, raising costs. Budget buffers and clear scope definitions prevent surprises.
Price By Region
Three regional snapshots illustrate typical installed price ranges for 2,000 sq ft homes. In Coastal Urban areas, Hardie may run $28,000 to $40,000 total, whereas Everlast could be $18,000 to $28,000. Suburban regions often show a $22,000 to $32,000 range for Hardie and $15,000 to $24,000 for Everlast. Rural markets frequently report lower labor, with Hardie in the $20,000 to $30,000 range and Everlast around $13,000 to $20,000. Regional dynamics influence both material and labor pricing.
Sample Real-World Pricing Scenarios
Three scenario cards illustrate typical project configurations. These examples use common assumptions and show totals plus per-square-foot details. Adjust for local conditions and current material costs.
Basic Scenario
2,000 sq ft home, Everlast siding, standard 4-inch reveal, standard trim, no extra underlayment. Materials $2.50-$5.50 per sq ft, labor $3.50-$7.50 per sq ft. Delivered materials $550, disposal $200, permits $0-$150. Estimated total $14,000-$20,000. Range per sq ft $9-$13.
Mid-Range Scenario
2,400 sq ft home, Hardie fiber cement, 6-inch reveal, additional trim, moderate underlayment. Materials $4.50-$7.50 per sq ft, labor $4.50-$10.00 per sq ft. Delivery $300-$600, permits $150-$500, coatings $200-$500. Estimated total $28,000-$36,000. Range per sq ft $9-$15.
Premium Scenario
3,000 sq ft home, Hardie with color coatings, enhanced seams, extra insulation board, wind-rated fasteners. Materials $5.00-$9.00 per sq ft, labor $6.00-$12.00 per sq ft. Delivery $500-$1,000, permits $400-$1,000, warranty upgrades $500-$1,000. Estimated total $45,000-$70,000. Range per sq ft $12-$19.
Maintenance & Ownership Costs
Both siding types offer long-term durability, but fiber cement generally carries lower maintenance needs than some vinyl composites. Over a 10-year horizon, maintenance costs are modest for both, though Hardie may incur higher initial maintenance during first year due to caulking and painting cycles on certain homes. A 5-year cost outlook shows labor and paint cycles for Hardie may add costs for color refreshes, while Everlast typically remains low maintenance if the finish is color-stable. Total ownership costs depend on climate and maintenance schedule.
Cost Compared To Alternatives
Compared with brick veneer or stucco, both Everlast and Hardie offer lower initial costs per square foot but differ in long-term maintenance. Vinyl siding variants like Everlast are often cheaper upfront but may require more frequent cleaning or paint refreshes, whereas fiber cement Hardie tends to retain color longer and resist weathering, potentially reducing mid-life repairs. Choosing between them involves evaluating upfront price against long-term performance.
FAQs
What is included in a typical installation price for siding projects? Most quotes include materials, labor, basic trim, fasteners, and standard underlayment. Extras like premium coatings, high wind-rated fasteners, and color-matched caulking may be billed separately. Always verify what is included in the estimate.
Do I need permits for siding replacement? Permits vary by jurisdiction. Some regions require no permit for cosmetic siding changes, while others require inspection. Expect $0-$1,000 in permit-related costs depending on local rules. Check local codes before starting a project.
Which is cheaper to install, Everlast or Hardie? On a per-square-foot basis, Everlast generally costs less to install than Hardie, especially for basic installations. However, total project price depends on house size, climate, and trim complexity. Factor in maintenance and color longevity when comparing overall value.