Prices for Everlog siding typically hinge on material grade, profile, installation complexity, and regional labor rates. The cost per square foot combines material and installation, with additional factors such as preparation, finish, and waste. Cost and price drivers to watch include board width, texture, and whether insulation or primers are needed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material (Everlog siding) | $4.50/sq ft | $6.20/sq ft | $9.00/sq ft | Profile, finish, and density vary |
| Installation Labor | $3.50/sq ft | $5.50/sq ft | $8.50/sq ft | Includes mounting, corrections, fasteners |
| Prep & Surface Work | $0.75/sq ft | $1.75/sq ft | $3.00/sq ft | Sheathing, moisture barriers if needed |
| Finishes & Coatings | $0.50/sq ft | $1.25/sq ft | $2.25/sq ft | Primer, sealant, paint or stain |
| Delivery/Disposal | $0.25/sq ft | $0.60/sq ft | $1.50/sq ft | Waste handling and transport |
| Permits & Inspections | $50 | $250 | $600 | Depends on locality |
Overview Of Costs
Everlog siding cost per square foot combines material and labor, with typical ranges from $8.00 to $16.00 per square foot installed. This article uses per-square-foot ranges and per-unit assumptions to help buyers estimate total project budgets. Assumptions: region, siding profile, crew size, and porch or multi-story complexity.
Cost Breakdown
Material costs and installation vary by profile and thickness. The following table summarizes typical components and how they contribute to the total. Per-unit prices reflect installed projects, not just material purchases.
| Component | Low | Average | High | Notes | Per-Unit |
|---|---|---|---|---|---|
| Materials (Everlog siding) | $4.50/sq ft | $6.20/sq ft | $9.00/sq ft | Texture and density drive price | $/sq ft |
| Labor | $3.50/sq ft | $5.50/sq ft | $8.50/sq ft | Crew size and regional wages | $/hour or $/sq ft |
| Prep & Surface Work | $0.75/sq ft | $1.75/sq ft | $3.00/sq ft | Moisture barrier, repairs | $/sq ft |
| Finishes | $0.50/sq ft | $1.25/sq ft | $2.25/sq ft | Primer, paint or stain | $/sq ft |
| Delivery & Disposal | $0.25/sq ft | $0.60/sq ft | $1.50/sq ft | Waste handling | $/sq ft |
| Permits | $50 | $250 | $600 | Local code requirements | Flat |
Assumptions: region, specs, labor hours.
What Drives Price
Key price drivers include profile options (thicker boards cost more), installation difficulty (multi-story or tight spaces increase time), and regional labor rates. Material selection such as textured grain or smooth finish can swing costs by 20–40%. A higher-grade moisture barrier or paint system adds to the total, while bulk purchases or long-term warranties may reduce per-square-foot pricing when negotiated.
Factors That Affect Price
Enclosed spaces, number of corners, and roof line complexity contribute to labor time and waste. HVAC and electrical clearances around exterior walls can affect crew movement and safety measures. For Everlog siding, main drivers also include the thickness, texture, and colorfastness of the composite or polymer blend used. Seasonal scheduling may shift labor availability and rates in some markets.
Labor, Hours & Rates
Local labor costs directly influence installed pricing. Urban areas tend to charge higher hourly rates than rural locations. Typical installation may range from 1.5 to 2.5 days for a standard single-story 1,500 sq ft home, depending on access and site conditions. A crew might consist of 2–4 installers plus a supervisor, with total labor hours scaling with wall area and openings.
Regional Price Differences
Regional variation matters for Everlog siding. In the Northeast, higher material transport costs and labor rates push the installed price upward. The South may see lower overall costs due to milder weather and competition among contractors. The Midwest often sits between these extremes, with prices affected by climate-related prep needs and building codes. Expect ±10–20% deltas between Urban, Suburban, and Rural settings in each region.
Real-World Pricing Examples
Three scenario cards illustrate typical project ranges. Each case uses the same house size but varies in profile, finish, and labor intensity. The per-square-foot numbers assume 1,500 sq ft of siding. data-formula=”labor_hours × hourly_rate”>
| Scenario | Spec | Hours | Materials | Labor | Other | Total |
|---|---|---|---|---|---|---|
| Basic | Standard texture, mid-grade finish | 28 | $9,000 | $4,200 | $1,000 | $14,200 |
| Mid-Range | Textured grain, premium finish | 34 | $11,500 | $5,000 | $1,150 | $17,650 |
| Premium | Custom texture, advanced coating | 40 | $14,000 | $6,600 | $1,400 | $22,000 |
Assumptions: region, specs, labor hours.
Pricing FAQ
What is a typical price per square foot for Everlog siding installed? Installed price commonly ranges from $8.00 to $16.00 per sq ft, depending on profile, finish, and regional labor. Expect material costs to account for roughly 40–60% of the total, with labor and prep making up the remainder.
Ways To Save
Smart planning reduces project price. Consider batching siding orders to reduce waste, scheduling during off-peak seasons if possible, and requesting itemized bids that separate materials, labor, and permits. If you can reuse or slightly adjust the existing sheathing, it may cut prep costs. A site assessment by a contractor can identify drainage or moisture barriers that can avoid costly surprises later.
Regional Price Differences
Local markets impact final invoices. Compare three market types: Urban, Suburban, and Rural. Urban settings typically show a +10% to +20% delta over Rural due to higher wages and logistics. Suburban markets often land in the middle, with variation based on contractor density and competition. For a 1,500 sq ft project, this can swing total cost by several thousand dollars depending on locale.
Cost Compared To Alternatives
Everlog siding vs. alternatives includes materials like vinyl, fiber cement, or true wood. Compared with vinyl, Everlog offers a more durable, textured appearance but with higher upfront costs. Against fiber cement, Everlog can be similar in price but may differ in installation ease and long-term maintenance. Relative to real wood, Everlog sits higher on price but can reduce maintenance and replacement cycles over time.
Assumptions: region, specs, labor hours.