Prices for Frigidaire dishwasher repairs typically range from a modest diagnostic fee to several hundred dollars for parts and labor. Key drivers include the specific model, the fault, and local labor rates. The following sections outline typical costs and practical budgeting tips for U.S. buyers. Understanding cost and price helps homeowners plan repairs with confidence.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Diagnostic Visit | $75 | $120 | $180 | In-home inspection or service call |
| Common Control Board Replacement | $150 | $270 | $550 | Includes parts and labor |
| Door Gasket / Seal Replacement | $60 | $120 | $210 | Leak-related fixes |
| Washer Pump / Motor | $120 | $260 | $520 | Impeller or motor failure |
| Drain/Filter Assembly | $50 | $110 | $180 | Clog or wear items |
| Labor (If Not Included) | $60/hour | $95/hour | $130/hour | Typical repair time varies by task |
Assumptions: region, model, fault type, and technician availability vary. Prices shown reflect common U.S. markets and standard warranties.
Overview Of Costs
Frigidaire dishwasher repair costs typically consist of a diagnostic fee plus parts and labor. Total project ranges depend on the faulty component, the model’s age, and whether replacement parts are new or refurbished. For a mid-range model, expect to pay a combined amount around $250-$500, with higher figures when critical boards or multiple parts fail. Most repairs fall within the $180-$350 range for common issues, while major failures can exceed $500 when a control board or motor is required. Labor rates in the U.S. generally fall between $85-$125 per hour, with a typical service call clocking 1–3 hours for straightforward fixes.
Per-unit pricing examples help buyers estimate costs before committing to service. For instance, a control board replacement might cost $150-$350 for parts plus $80-$120 for labor, totaling around $230-$470. A door gasket replacement can be $60-$120 for the part and $60-$100 for labor, totaling roughly $120-$220. These figures assume standard residential units and do not include potential taxes or disposal fees.
Cost Breakdown
Detailed categories show where money goes and how much is typical for Frigidaire repairs.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $50 | $140 | $520 | Gaskets, seals, boards, pumps |
| Labor | $60 | $95 | $130 | Hourly rate × hours |
| Equipment | $10 | $30 | $60 | Special tools or diagnostic gear |
| Permits | $0 | $0 | $0 | Typically none for residential repairs |
| Delivery/Disposal | $0 | $15 | $40 | Old part removal and disposal fees |
| Warranty / Overhead | $0 | $20 | $60 | Shop overhead or extended warranty add-ons |
| Taxes | $0 | $20 | $50 | State/local taxes |
Assumptions: model year, fault severity, and local labor markets affect the breakdown.
What Drives Price
Pricing varies with the type of fault and the replacement part complexity. Control boards and motors are among the most expensive components due to complexity and availability. Older Frigidaire models may require discontinued or refurbished parts, which can influence price and reliability. Additionally, unit capacity (standard 24-inch vs. compact models) and features like stainless steel tub or dual spray arms can shift part costs upward. Seasonal demand can also affect service call rates, particularly during holidays when kitchens see heavier use.
Labor, Hours & Rates
Labor contributes a meaningful portion of most repair bills. Typical jobs run 1–3 hours, depending on access, diagnostic time, and whether multiple assemblies must be replaced. In urban areas, hourly rates average $95-$125; rural rates can be closer to $75-$105. For complex intermittent faults, technicians may require longer diagnostic windows, increasing the total bill. Some shops offer flat-rate pricing for common fixes, which can reduce the risk of inflated hours.
Factors That Affect Price
Key price levers include model age, fault type, and regional labor costs. High-efficiency or newer Frigidaire models may demand more expensive boards or sensors. The fault class — electrical vs mechanical — also matters: electronics typically cost more to replace than seals or pumps. Model-specific parts availability can create price volatility; rare or discontinued boards may require alternatives or remanufactured units, impacting total price and reliability.
Regional Price Differences
Prices vary across regions due to labor market differences and travel time. In the Northeast, diagnostic fees and hourly rates often run higher than the Midwest or South. Urban centers may add travel surcharges or minimum-service fees, while rural areas may have limited technicians leading to higher wait times and potentially higher quotes. A typical regional delta might be ±15% to ±25% compared with national averages, depending on part availability and local competition.
Regional Price Differences — Quick snapshot
- Coastal metro areas: diagnostic $100-$180, labor $100-$130/hour
- Midwest suburban: diagnostic $90-$140, labor $85-$110/hour
- Southern rural: diagnostic $70-$120, labor $75-$100/hour
Real-World Pricing Examples
Concrete scenarios illustrate typical quotes and outcomes.
-
Basic: Diagnosed as a door seal leak; gasket replacement only.
Labor: 1.2 hours, Parts: $60 gasket.
data-formula=”labor_hours × hourly_rate”>
Estimated total: $120-$220. -
Mid-Range: Control board replacement with new pump.
Parts: $180-$260, Labor: 1.5–2.5 hours.
Estimated total: $260-$520. -
Premium: Motor failure on a high-capacity model; upgrade to a compatible board.
Parts: $320-$520, Labor: 2–4 hours.
Estimated total: $520-$970.
Assumptions: standard installation area, typical 24-inch unit, and common fault patterns.
Ways To Save
Budget-conscious options help manage Frigidaire repair costs without compromising reliability. Compare quotes from at least two technicians, ask for itemized estimates, and verify whether diagnostic fees apply toward the repair. If a part is still under warranty or a refurbished item is acceptable, discuss those paths before approving replacement. Some retailers or manufacturers offer repair rebates or bundled maintenance plans that lower long-term ownership costs. For very old units, consider cost-effective replacement versus repeated repairs when total estimates exceed 60-70% of a new unit’s price.
Cost Compared To Alternatives
Repair pricing should be weighed against replacement costs and energy efficiency gains. A new Frigidaire dishwasher can range from approximately $600 to $1,200 before installation, with higher-end models surpassing $1,500. Energy-efficient selections may reduce annual operating costs, potentially offsetting higher upfront prices over several years. When repair costs approach the price of a new unit, replacement becomes financially sensible, especially for models with frequent failure history or poor energy performance.
Maintenance & Ownership Costs
Ongoing costs influence the long-term value of any dishwasher. Routine maintenance, such as cleaning spray arms and filters, reduces the likelihood of clogs that escalate repair needs. Over a five-year horizon, expect intermittent minor repairs plus periodic belt or seal checks. Ownership costs also include potential service calls for delamination, drainage issues, or sensor recalibration. Keeping the unit within warranty or opting for extended service plans can mitigate unpredictable outlays.
Note: This article uses ranges to reflect typical U.S. pricing and acknowledges regional variations, labor markets, and model-specific parts. All figures are in USD and exclude tax.