Homeowners typically pay a combined price for GE oven igniter replacement that covers parts, labor, and potential minor repair needs. The main cost drivers are the igniter model, whether a universal part fits, and regional labor rates. This guide breaks down exact cost ranges and what affects them.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Igniter part (GE, OEM or aftermarket) | $15 | $40 | $90 | Urgency can push toward OEM parts. |
| Labor for installation | $60 | $120 | $180 | Typical 1–2 hours depending on access. |
| Diagnostic/service fee (if not replacing) | $0 | $50 | $90 | Some shops waive with part purchase. |
| Tax | $0 | $10 | $20 | Based on location. |
| Delivery/Pickup (optional) | $0 | $15 | $30 | Can be waived if ordered with service. |
Overview Of Costs
Typical cost range for GE oven igniter replacement combines parts and labor. A standard self-contained job often falls in the $75–$210 range when an igniter is readily accessible and compatible with a common GE model. If the job requires a non-diagnostic visit or extensive disassembly, total costs can rise toward $300 or more. Assumptions include a standard 24-inch gas or electric wall oven, single igniter replacement, and normal access in a residential kitchen.
Per-unit pricing can help plan budgets: igniter parts typically $15–$90, plus labor at $60–$180. In many cases, a complete kit that includes the igniter and a door seal or screw set costs slightly more, around $25–$120 for the parts portion.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $15 | $40 | $90 | OEM vs aftermarket impacts price. |
| Labor | $60 | $120 | $180 | Typically 1–2 hours; complexity varies by access. |
| Permits | $0 | $0 | $0 | Residential uninstall/repair rarely requires permits. |
| Delivery/Removal | $0 | $15 | $30 | Assessed when a service call includes pickup/delivery. |
| Taxes | $0 | $10 | $20 | State and local tax applies. |
| Diagnostics (if not replacing) | $0 | $50 | $90 | Some providers charge if the part is not needed. |
What Drives Price
Igniter compatibility with GE models affects both part availability and cost. Some older or specialty ovens require OEM parts at higher prices, while newer units may use universal igniters that fit multiple models. Labor complexity also matters; easier access under a range hood or behind a bottom panel can cut time.
Model and fuel type determine the exact part number. A gas oven igniter replacement might incur additional checks for gas safety and venting, especially if related components show wear. Electric ovens generally have simpler access but may require wiring checks for safety.
Regional Price Differences
Urban vs. Suburban vs. Rural differences exist in labor rates and availability of OEM parts. In big-city markets, expect higher labor rates, typically 10–25% above national averages, with OEM parts frequently priced higher. Suburban areas usually sit near national averages with occasional supply delays. Rural locations may offer lower labor rates but longer travel fees or scarcity of parts.
Labor, Hours & Rates
Typical install time is 1–2 hours for a straightforward igniter swap. If additional components must be replaced (spark module, safety valve, or door seal), total time can extend to 3–4 hours. Technician hourly rates commonly range from $60 to $150, depending on region and certification level.
Mini formula data-formula=”labor_hours × hourly_rate”> helps estimate costs when hours and rates vary. For example, 1.5 hours at $100/hour equals $150 for labor (before taxes and possible trip fees).
Additional & Hidden Costs
Hidden costs may include diagnostic fees if the problem is misdiagnosed, or a service call surcharge for after-hours work. Some service providers include the diagnostic in the labor line if the igniter is replaced in the same visit.
Surge pricing scenarios can occur when parts are backordered or a technician must come from a distant location, potentially adding 20–40% to the base labor fee. In high-demand seasons, schedule windows may carry a premium or expedited service option.
Real-World Pricing Examples
Basic
Parts: OEM igniter $45; Labor: 1.0 hour at $90; Tax: $8; Total: $143.
Mid-Range
Parts: OEM igniter $60; Labor: 1.5 hours at $110; Diagnostics: $40; Tax: $12; Total: $262.
Premium
Parts: OEM igniter $90; Labor: 2.5 hours at $130; Delivery/Removal: $25; Taxes: $22; Total: $345.
Prices At A Glance
Low-High snapshot: Igniter part $15–$90, labor $60–$180, taxes and extras bring total replacement cost to roughly $75–$300 in most residential scenarios. For complex installs or older appliances, totals can approach $350–$450.
What To Ask Before Scheduling
Clarify coverage of diagnostic fees, part availability, and whether the quoted price includes disposal, return trips, or a warranty on parts and labor. Confirm the model number of the GE oven to ensure the correct igniter part is ordered, and ask about any potential after-hours charges if you need a same-day visit.