Prices for pressure washing gutters vary by gutter length, height, and debris load. The main cost drivers are ladder setup, interior gutter cleaning, and disposal of debris. This guide provides practical cost ranges in USD and per-unit pricing to set expectations.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Gutter pressure washing (per linear ft) | $0.25 | $0.40 | $0.60 | Assumes standard aluminum gutters, mild debris |
| Total project (125–200 ft) | $125–$250 | $200–$350 | $350–$600 | Typical residential homes |
| Labor (hourly) | $40–$60 | $60–$90 | $90–$150 | Crew time and setup |
| Equipment & supplies | $20–$50 | $40–$120 | $60–$200 | Soap, protectants, rinse aids |
| Disposal & cleanup | $0–$20 | $20–$60 | $50–$120 | Depends on debris load |
Overview Of Costs
Cost for gutter pressure washing typically ranges from $125 to $600 depending on length, height, and condition. Assumptions: standard aluminum gutters, single-story or low two-story home, no extensive mold or paint damage.
Cost Breakdown
Items and pricing break down the total project cost. The table below shows the main cost categories and common ranges, mixing total project estimates with per-unit rates to help with budgeting.
| Category | Low | Average | High | Notes | Per-Unit |
|---|---|---|---|---|---|
| Materials & supplies | $20 | $60 | $200 | Soaps, cleaners, protective gear | $0.15–$0.60/ft |
| Labor | $40 | $60 | $150 | Based on hourly rates; typical crew size 1–2 | $30–$75/hr |
| Equipment & setup | $20 | $40 | $120 | Ladders, hoses, nozzles | $0.10–$0.40/ft |
| Disposal | $0 | $20 | $120 | Debris removal and cleanup | Included in project |
| Permits & codes | $0 | $0 | $0 | Typically not required for standard cleaning | NA |
| Travel & accessibility | $0 | $20 | $60 | Extra for remote locations or surge pricing | NA |
| Contingency | $0 | $0 | $40 | Contingent on unseen obstructions | NA |
What Drives Price
Key price drivers include gutter length, number of stories, pitch and accessibility, debris buildup, and required cleanup. For example, two-story homes with long gutters and heavy pine needle buildup will push costs higher than a single-story, smooth gutter run. Another driver is interior downspout access, which can add time. Assumptions: typical residential scenario, mild to moderate debris.
Ways To Save
Small adjustments can reduce the bill. Combine gutter washing with nearby exterior tasks (e.g., siding or driveway cleaning) to share labor. Scheduling in mild weather and avoiding peak seasons may reduce price. Ask for a flat-rate quote for a defined run length to minimize surprises. Assumptions: single service visit, defined gutter length.
Regional Price Differences
Prices vary by region and market conditions. Urban areas often see higher quotes than suburban or rural locations due to labor demand and equipment costs. The table below outlines typical delta ranges across three U.S. markets.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Urban | $0.30 | $0.50 | $0.70 | Higher labor and access costs |
| Suburban | $0.28 | $0.45 | $0.65 | Most common range |
| Rural | $0.22 | $0.35 | $0.55 | Lower callout and travel time |
Real-World Pricing Examples
Three scenario cards illustrate typical quotes. Each includes specs, labor hours, per-unit pricing, and total estimates to guide budgeting.
Basic
Specs: 120 ft of standard aluminum gutters, single-story, light debris. Labor: 2 hours. Per-unit: $0.40/ft. Total: $96–$120. Assumptions: no downspout cleaning, no extra protection required.
Mid-Range
Specs: 150 ft, two-story house with light moss and pine needles, minor downspout runs. Labor: 3.5 hours. Per-unit: $0.50/ft. Total: $150–$225. Assumptions: basic protection and disposal included.
Premium
Specs: 200 ft, two-story with heavy debris and cable guards, shaping and edge cleaning. Labor: 4.5 hours. Per-unit: $0.60/ft. Total: $300–$520. Assumptions: thorough rinse, post-cleanup, and minor downspout flushing.
Notes on estimates: Prices assume standard materials and typical crew sizes. If gutters require painting, lining, or extensive downspout work, costs may increase. Assumptions: region, specs, labor hours.