Refelting a pool table is a common maintenance task with costs driven by cloth quality, table size, and labor. Buyers typically pay for materials, labor, and any necessary prep work. The following sections break down typical pricing, what affects totals, and ways to save on a refelting project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Table Refelting (labor + cloth) | $400 | $750 | $1,500 | Standard 8 ft table with mid-range cloth; DIY partials possible. |
| Cloth (per table) | $120 | $250 | $500 | Standard billiard cloth; prices vary by fabric and wool content. |
| Installation Time (hours) | 3 | 5 | 8 | Professional setup includes leveling and tensioning. |
| Leveling & Setup (service) | $50 | $150 | $300 | Critical for true roll; higher with irregular slate. |
| Materials & Supplies | $20 | $60 | $120 | Glue, underlay, trimming, seam tape. |
| Travel/Delivery | $0 | $80 | $180 | Based on distance; urban areas higher. |
| Warranty & Post-Install Checks | $0 | $50 | $150 | Optionally included for labor coverage. |
| Permit/Fees | $0 | $0 | $0 | Typically none for residential work. |
Overview Of Costs
Refelting a pool table involves materials, labor, and sometimes prep or leveling. Typical price ranges reflect table size, cloth selection, and regional labor rates. Assumptions include a standard residential installation, 8 ft or 9 ft tables, and mid-range wool-blend cloth. The total project usually falls between $500 and $1,800, with higher-end options exceeding $2,000 for premium materials or large tables.
Per-unit ranges illustrate costs per table rather than per foot: cloth often ranges $120-$500 per table, while labor and setup can be $350-$1,000 or more depending on complexity.
Cost Breakdown
The breakdown below outlines how the total price typically assembles. Geometry, cloth type, and labor quality drive most variances.
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Taxes |
|---|---|---|---|---|---|---|
| $120-$500 | $350-$1,000 | $30-$100 | $0 | $0-$50 | $0-$150 | 0-9% |
What Drives Price
Cloth quality is the dominant price lever. Premium wool-blend or long-pile fabrics cost more but improve ball response and durability. Table size and shape matter: larger or non-standard tables require more fabric and extended labor. For example, a 9 ft table often costs more to refelt than an 8 ft table due to additional cloth and handling. Professional leveling adds cost but reduces future issues; mislevel tables create inconsistent rolls and require reseating weights or slate work, which raises the price.
Other drivers include regional labor rates (urban markets typically higher) and travel time if the installer must commute long distances. Assumptions: region, specs, labor hours.
Regional Price Differences
Prices vary by U.S. region due to labor markets and material availability. In general, the ranges below illustrate typical deltas from a national baseline.
- Coastal metropolitan area: +10% to +25% vs. national average due to higher labor and delivery costs.
- Midwest suburban: near national average, +/- 5% depending on cloth choice and schedule.
- Southern rural: -5% to -15% as labor rates trend lower and travel time is shorter.
Labor, Hours & Rates
Labor costs reflect crew size, skill, and time on site. A standard refelt job typically uses one to two technicians over 3–8 hours. Hourly rates commonly range from $50 to $120, with premium installers at the higher end. When a slate bed exists or needs leveling, crews may require extra hours or a second visit, increasing the total by 20%–40%.
data-formula=”labor_hours × hourly_rate”> For example, 4 hours at $90/hour yields $360 in labor; 6 hours at $110/hour yields $660. Consider scheduling during off-peak seasons to potentially reduce labor costs.
Additional & Hidden Costs
Hidden or optional costs can shift totals. Underlay thickness or cloth seam alignment may require additional labor time. If the table is in a room with limited access, extra labor for moving the table into position may apply. Travel fees apply in rural areas or for distant installers, and warranty extensions add cost but provide post-install confidence. Some shops offer blended pricing blends for both cloth and installation, reducing average per-unit costs when bundled.
All-inclusive quotes help avoid surprises. A typical setup may include basic alignment and a short follow-up check, with optional paid tune-ups at 6–12 months if pockets or rails show wear.
Real-World Pricing Examples
Three scenario cards illustrate common outcomes. Each includes specs, labor hours, per-unit prices, and totals. Assumptions: residential room, standard 8 ft table, cloth quality mid-range.
Basic Scenario
8 ft standard table, mid-range wool-blend cloth, simple leveling. Specs: 8 ft x 4 ft playing area, room with standard access. Labor: 3–4 hours. Cloth: $150. Total: $450–$750.
Mid-Range Scenario
9 ft table, premium wool-blend cloth, thorough leveling and TV clearance. Specs: larger sheet, more fabric. Labor: 4–6 hours. Cloth: $250. Total: $700–$1,100.
Premium Scenario
9 ft table, high-end cloth (silky feel, improved speed), expert leveling, delivery, and setup in a tight space. Specs: extra fabric and adjustments. Labor: 6–8 hours. Cloth: $420. Total: $1,500–$2,100.
Price By Region
To illustrate regional differences, consider three markets with approximate deltas. A standard 8 ft refelting job may range:
- Urban Northeast: $650–$1,100
- Suburban Midwest: $500–$900
- Rural South: $450–$800
Price Components
Isolating components helps planning. The most impactful components are Materials and Labor, with Cloth price and Installer time driving most variations. Budget planning should allocate roughly equal shares to materials and labor, with a cushion for potential extra hours if leveling proves intricate.
Assuming a standard 8 ft table with mid-range cloth, a practical budget range is $500–$1,000 for typical residential projects, and $1,000–$2,000 for larger tables or premium cloth with meticulous leveling and delivery considerations. Assumptions: region, specs, labor hours.