Roof Cost for 1100 Sq Ft: Price Guide and Savings 2026

The cost of reroofing a 1100 sq ft roof typically varies by material, roof complexity, and local labor rates. Common drivers include material type, removal of old roofing, underlayment, and disposal. This guide presents cost ranges in USD and highlights where price can swing based on choices. Cost, price, and pricing are addressed to help buyers estimate budgets accurately.

Item	Low	Average	High	Notes
Roofing materials	$1,800	$3,300	$9,000	Asphalt shingles are common; metal or tile increases cost.
Labor	$1,000	$2,000	$4,000	Includes removal, installation, and cleanup; varies by pitch and complexity.
Removal & disposal	$500	$1,200	$2,500	Old material hauling and landfill fees apply.
Underlayment & flashings	$250	$600	$1,500	Quality underlayment adds durability; flashing increases with roof edges.
Permits & inspections	$50	$350	$1,000	Depends on local codes and permit fees.
Delivery & miscellaneous	$100	$350	$900	Materials delivery, waste bags, and small tools.

Overview Of Costs

Typical cost range for a 1100 sq ft roof is about $4,000-$12,000 depending on material choice and roof condition. The per-square-foot estimate commonly falls between $3.50-$9.00 per sq ft installed, with asphalt shingles on the lower end and premium options on the high end. Basic projects often land near the lower end when removal is minimal and the pitch is moderate. Heavier roof designs, complex geometry, or difficult access can push prices upward.

Cost Breakdown

The following table shows how a project can break down for a 1100 sq ft roof. The numbers assume standard suburban conditions with typical access and a moderate pitch.

Component	Low	High	Typical	Notes
Materials	$1,800	$9,000	$3,300	Material type drives the spread; asphalt vs metal vs tile.
Labor	$1,000	$4,000	$2,000	Includes installation, removal, and cleanup.
Permits	$50	$1,000	$350	Local jurisdiction fees may apply.
Disposal	$500	$2,500	$1,200	Waste hauling and disposal charges.
Underlayment	$250	$1,500	$600	Quality underlayment adds protection.
Delivery & extras	$100	$900	$350	Fasteners, sealants, small accessories.

Factors That Affect Price

Roof material choice is the dominant driver—asphalt shingles are cheapest; metal and tile are more expensive due to material and installation complexity. Roof pitch and complexity affect labor time and safety needs; steeper or multi-peak roofs increase both duration and risk. Assumptions: region, specs, labor hours. Local labor rates and disposal fees also influence total cost, with coastal cities often higher than inland areas.

Ways To Save

Option to save includes choosing standard asphalt shingles over specialty products, performing work in favorable seasons, and bundling full replacement instead of partial repairs. Request multiple quotes to compare labor rates and material warranties. Ensure the estimate lists removal, disposal, permits, and waste management to avoid surprise charges.

Regional Price Differences

Prices vary by region due to crew availability, demand, and material transport. In the table, three regional snapshots illustrate typical deltas from the national baseline:

• West Coast: +5% to +12% due to higher labor and permit costs.
• Midwest: near baseline with occasional +5% spikes in hot seasons.
• Southeast: -5% to -15% when competition among contractors is high and material costs are stable.

Labor & Installation Time

For a 1100 sq ft roof, installation time typically spans 1–3 days depending on crew size and roof complexity. Labor rate ranges commonly run $40-$65 per hour per worker; a 2–3 person crew is typical for residential reroofing. Span considerations include material handling, safety equipment setup, and weather delays.

Real-World Pricing Examples

Three scenario cards illustrate common outcomes for a 1100 sq ft roof. Assumptions: suburban home, standard pitch, no significant repairs.