buyers typically pay for Sherwin Williams Super Paint in the low hundreds per gallon, with total project costs driven by coverage area, surface prep, and finish level. This guide breaks down the current price ranges, what affects cost, and practical budget tips for U.S. homeowners and contractors. The focus is on cost and price considerations to help plan a painting project with Sherwin Williams Super Paint.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Paint (gallon, Interior Flat or Eggshell) | $45 | $58 | $70 | Depends on retailer and finish. |
| Coverage (per gallon) | 250 sq ft | 350 sq ft | 400 sq ft | Assumes one coat; two coats common. |
| Preparation & Priming | $50 | $150 | $350 | Includes sanding, patching, and primer if needed. |
| Labor (hours) | 4 | 12 | 28 | Varies by area and surface complexity. |
| Labor Rate (per hour) | $28 | $45 | $65 | Union vs non-union or regional differences. |
Overview Of Costs
Cost estimates for Sherwin Williams Super Paint on typical interior rooms range from $60 to $120 per gallon when purchased retail, with larger projects spanning $1,200 to $3,000 for whole-home jobs depending on surface area and finish. The per-square-foot pricing commonly falls between $1.20 and $3.00, assuming two coats and standard prep. Assumptions: region, room count, surface type, and required priming.
Cost Breakdown
Breakdown of a standard interior painting job using Sherwin Williams Super Paint shows key cost buckets. The table below uses a mix of totals and per-unit pricing to reflect real-world bills. The example assumes a mid-sized 1,800 sq ft home with 2 interior coats and basic surface prep.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $120 | $250 | $420 | Two gallons per 500 sq ft; extra for high ceilings. |
| Labor | $540 | $1,320 | $2,600 | Based on 12–40 hours; varies by crew size. |
| Labor Rate | $24/hr | $45/hr | $65/hr | Regional differences apply. |
| Prep & Priming | $80 | $180 | $420 | Patching cracks and priming when needed. |
| Permits & Fees | $0 | $50 | $150 | Typically minimal; varies by locale. |
| Delivery/Disposal | $20 | $60 | $120 | Bulk supply vs. small batch delivery. |
| Contingency | $40 | $110 | $260 | 10–15% is common for unforeseen repairs. |
| Taxes | $0 | $60 | $120 | State/local tax on materials and services. |
What Drives Price
Pricing variables for Sherwin Williams Super Paint include the finish level (matte, eggshell, satin), room size, surface condition, amount of priming, and geographic labor costs. Regions with higher living costs or skilled-labor demand can see higher hourly rates. The paint’s color and availability can also influence price if specialty tints or promotions apply. Assumptions: interior project, standard walls, single-story home.
Ways To Save
Budget techniques include combining rooms to reduce material waste, selecting a less costly sheen when possible, and scheduling during promotions or contractor slow seasons. Using a single contractor for both labor and materials can reduce overhead. Proper surface preparation saves money by reducing re-coats. Assumptions: no major repairs needed; two coats typical.
Regional Price Differences
Price varies by region due to local wage standards and material costs. In the Northeast, expect higher labor rates, while the Midwest may offer moderate pricing. The West often shows strong demand-driven pricing, and the South may offer more competitive labor rates. A typical delta is ±15% to ±25% between Urban, Suburban, and Rural areas. Assumptions: similar home size; standard surfaces; two coats.
Labor & Installation Time
Time impacts cost through crew size and efficiency. A small room with standard walls may take 4–6 hours of labor for prep and two coats; larger homes with vaulted ceilings or demanding trims can require 20–30 hours. Labor rates commonly range from $28 to $65 per hour depending on region and contractor. Assumptions: interior painting only; no specialty coatings.
Real-World Pricing Examples
Scenario 1 — Basic: One 12×12 room, standard walls, one ceiling, two coats, no priming. Materials: 2 gallons, Labor: 6 hours, Rate: $40/hr, Extras: minimal. Total: about $260–$420. Assumptions: interior, standard surfaces.
Scenario 2 — Mid-Range: Four rooms, 1,200 sq ft total, some patching, light primer, two coats. Materials: 5–6 gallons, Labor: 16–24 hours, Rate: $45/hr. Total: about $1,100–$2,000.
Scenario 3 — Premium: Whole-home project, 2,000–2,500 sq ft, extensive prep, premium finish, multiple colors, two coats. Materials: 8–10 gallons, Labor: 40–60 hours, Rate: $65/hr. Total: about $4,500–$7,000. Assumptions: premium surfaces; extensive trimming and ceilings.
Assumptions: region, specs, labor hours.