New Shingle Roof Cost: Price Guide for Homeowners 2026

Buyers typically pay for a new shingle roof between $6,800 and $18,500, with averages around $10,400 depending on roof size, shingle quality, and installation complexity. Key cost drivers include roof area in squares, roof pitch, underlayment, and local labor rates.

Item	Low	Average	High	Notes
Total project	$6,800	$10,400	$18,500	Asphalt shingles; standard pitch; 1-3 vents; moderate complexity
Per square (100 sq ft)	$350	$520	$650	Installed price range; varies by shingle grade
Per hour (labor)	$40	$55	$75	Crew rates vary by region and experience
Materials	$2,800	$4,200	$7,200	Shingles, underlayment, flashing, and nails
Labor	$2,000	$3,800	$6,400	Roof removal, installation, cleanup
Permits	$100	$300	$1,000	Depends on city/county rules
Delivery/Disposal	$400	$900	$2,000	Waste disposal and haul-away
Warranty	$0	$300	$800	Manufacturer warranty options
Contingency	$300	$1,000	$2,000	5–10% for unforeseen issues

Assumptions: region, typical roof size around 1,600–2,600 sq ft, standard pitch, asphalt architectural shingles.

Overview Of Costs

Typical price range for a standard asphalt shingle roof is $6,800–$18,500, with most homes in the $9,500–$12,000 range. For homeowners budgeting per square, expect $350–$650 per 100 sq ft installed, depending on shingle grade and complexity.

Key cost drivers include roof area (in squares), roof pitch (steeper roofs need more labor and safety measures), underlayment quality, attic ventilation, and local labor rates. Higher-end architectural shingles raise material costs but can reduce the need for additional features in some cases.

Cost Breakdown

The following table shows the main cost categories and typical ranges. The figures assume asphalt architectural shingles and standard installation with basic flashing and one roof vent. Higher complexity or premium materials shift these amounts upward.

Category	Low	Average	High	Notes
Materials	$2,800	$4,200	$7,200	Shingles, underlayment, nails, flashing
Labor	$2,000	$3,800	$6,400	Removal + installation; safety gear included
Equipment	$200	$600	$1,200	Ladders, roto, dumpsters
Permits	$100	$300	$1,000	Local requirements vary
Delivery/Disposal	$400	$900	$2,000	Waste hauling and disposal fees
Warranty	$0	$300	$800	Materials and workmanship options
Contingency	$300	$1,000	$2,000	Unforeseen issues (rot, sheathing)

Labor encoding: data-formula=”labor_hours × hourly_rate”>

What Drives Price

Roof size and pitch are primary; larger homes and steeper roofs require more materials and labor. Shingle type also matters: basic 3-tab shingles cost less than architectural/laminate styles. A higher NRC, better wind resistance, and longer warranties add cost but may reduce long-term maintenance.

Ways To Save

Strategies to reduce costs include choosing standard asphalt shingles over premium options, matching existing roof lines to avoid extra flashing, and scheduling during off-peak seasons when crews are more available. Roof complexity reduction by redesigning a few roof features can trim labor time and waste.

Regional Price Differences

Prices vary by region due to labor markets and material access. In the three markets below, typical ranges differ by roughly +/- 15–25% from national averages.

• <bUrban: Higher permitting costs and crane or safety requirements push totals toward the upper end.
• Suburban: Most common pricing band, balanced between labor and material costs.
• Rural: Lower labor rates but higher trucking charges for materials can push totals mid-range.

Assumptions: regional labor rates, transport distances, and permit fees vary by locale.

Real-World Pricing Examples

Three scenario cards illustrate how specs affect outcomes. Each includes labor hours, per-unit prices, and totals. Parts lists vary to show practical differences.