The typical cost for a Stiltz home lift includes the lift unit, installation, and any necessary site work. Price varies by model, home layout, and local labor rates. The main cost drivers are equipment choice, access constraints, permits, and delivery logistics. Cost and price awareness helps buyers budget effectively.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Lift Unit | $18,000 | $28,000 | $45,000 | Stiltz models vary by capacity and features |
| Installation & Labor | $7,500 | $12,000 | $18,000 | Typically 1–3 crews; site access matters |
| Permits & Inspections | $300 | $2,000 | $4,000 | Local codes may require reviews |
| Delivery & Handling | $1,000 | $2,500 | $4,000 | Warehousing and curb-to-site costs |
| Electrical & Ancillaries | $1,500 | $3,000 | $6,000 | Electrical work and transformer if needed |
| Total Project | $28,300 | $46,500 | $77,000 | Assumes standard two-story home and interior shaft |
Overview Of Costs
Typical cost range for a Stiltz home lift includes the unit plus installation. In most U.S. projects, total installed price falls between a low of about $28,000 and a high near $77,000, with an average around $46,000. Costs assume a standard two-story home, accessible floor joists, and indoor installation. Assumptions: region, specs, labor hours.
The per-unit range for the lift itself generally sits around $18,000 to $45,000, depending on model and capacity. Heavier or feature-rich configurations push the price toward the upper end. Labor and permitting often account for a sizable portion of the budget and can vary by city.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $18,000 | $28,000 | $45,000 | Lift unit and shaft components |
| Labor | $7,500 | $12,000 | $18,000 | Install, framing, electrical rough-in |
| Equipment | $1,500 | $3,000 | $6,000 | Tools, lifts, adapters |
| Permits | $300 | $2,000 | $4,000 | Building and electrical permits |
| Delivery/Disposal | $1,000 | $2,500 | $4,000 | Site delivery and waste removal |
| Warranty & Aftercare | $200 | $600 | $1,200 | Limited coverage or optional plans |
What Drives Price
Model selection influences unit cost; higher capacity and premium finishes raise the price. Installation complexity, including shaft location, ceiling height, and interior finish work, also affects totals. Regional labor rates and permit requirements can create meaningful delta in total spend.
Ways To Save
Shop multiple quotes to compare installation scope and materials. If feasible, combine available permits and schedule permits together with other remodeling work to reduce trips. Consider a standard model with fewer options to lower the upfront cost.
Regional Price Differences
Prices vary by location due to labor costs, permit fees, and accessibility. In major metro areas, expect higher labor and delivery charges, while rural markets may offer lower installation fees but longer lead times. Three-region snapshot shows roughly +/- 15–25% variance between Urban, Suburban, and Rural projects.
Labor & Installation Time
Average installation spans 1–3 days for standard layouts, with longer timelines if structural work or retrofitting is needed. Labor hours and rates typically range from 8–24 hours at $90–$150 per hour depending on crew experience and local conditions.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes with Stiltz lifts. Assumptions: region, specs, labor hours.
Basic Scenario
Two-story home, standard lift model, no shaft modifications. Lift unit $18,000; installation $7,500; permits $300. Total around $25,800. Delivery and electrical add $2,000.
Mid-Range Scenario
Two-story home, enhanced finish, minor shaft work. Lift unit $28,000; installation $12,000; permits $2,000; delivery $2,500; electrical $3,000. Total around $47,500.
Premium Scenario
Three-story home, high-capacity unit with premium interior finishes. Lift unit $42,000; installation $18,000; permits $4,000; delivery $4,000; electrical $6,000. Total around $74,000.
Assumptions: region, specs, labor hours.