Trex decking cost per foot varies by line, profile, and installation. Typical price ranges reflect material quality, surface texture, and regional labor. This guide outlines the per-foot cost of Trex boards, plus installed pricing and common drivers that influence the total budget.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material cost per linear foot (board) | $2.50 | $5.50 | $8.50 | Including basic Trex lines; excludes VAT |
| Installed price per square foot | $8.00 | $12.00 | $16.00 | Depends on substructure, fasteners, and trim |
| Average project size | N/A | 250 sq ft deck | N/A | |
| Typical total (200–400 sq ft) | $4,000 | $6,000 | $9,000 | Material plus installation |
Overview Of Costs
Cost ranges cover material only and installed totals. Trex material cost per linear foot varies by line: Enhance starts near $2.50–$3.50, Select around $3.50–$5.50, and Transcend roughly $7.00–$8.50. Installed price per square foot typically spans $8.00–$16.00, depending on substrate, joist spacing, and access. Assumptions: mid-width boards (5.5 inches), standard interlocked profile, and a straightforward rectangular deck.
As a baseline, a 200 sq ft deck installed with mid-range Trex boards often lands in the $4,000–$8,000 range, with variations driven by labor rates and site conditions. Lower-cost scenarios usually involve simpler framing and fewer add-ons, while Premium configurations include upgraded fasteners, closed-stringer trim, and water management features.
Cost Breakdown
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.50/linear ft | $5.50/linear ft | $8.50/linear ft | Trex line varies by performance and color |
| Labor | $3.00–$6.00/sq ft | $6.00–$12.00/sq ft | $12.00–$20.00/sq ft | Includes framing and decking install; higher in tight spaces |
| Materials (fasteners, flashing) | $0.50–$1.50/sq ft | $1.00–$2.50/sq ft | $2.50–$4.00/sq ft | Hidden vs visible fasteners affect cost |
| Permits & inspections | $0 | $150–$500 | $1,000+ | Region dependent |
| Delivery/haul-away | $50–$150 | $150–$350 | $400–$800 | Distance and site access drive price |
| Warranties & extras | $0–$100 | $100–$300 | $300–$600 | Extended coverage available |
What Drives Price
Trex deck pricing is shaped by the chosen line, board length, and color stability. Material quality and warranty terms significantly impact per-foot cost. For example, Transcend boards command higher per-foot prices than Enhance or Select, reflecting longer warranty periods and higher fade resistance. Additionally, the deck’s geometry—curves, multiple levels, or custom railing and lighting—adds labor and materials cost.
Builders often price per linear foot for boards and per square foot for installed work. A typical assumption is five-and-a-half inch boards with standard joist spacing; deviations increase both material waste and installation time, nudging totals higher. Assumptions: region, specs, labor hours.
data-formula=”labor_hours × hourly_rate”>
Regional Price Differences
Prices vary across the U.S. For a three-area snapshot, material costs are similar, but installed totals diverge due to labor rates and permitting.
- West Coast: +5% to +15% on installed totals, driven by higher labor and freight.
- Midwest/Southern urban: baseline to +5% above national averages.
- Rural areas: often 0% to -5% on installation due to lower labor costs, but travel time can offset savings.
Labor & Installation Time
Installation time depends on deck size, complexity, and access. A simple 200 sq ft deck typically requires 1–2 weeks from site prep to finish, with crew sizes ranging from 2–4 workers. Time efficiency and crew experience directly affect total labor cost, while weather and permits can introduce delays.
Additional & Hidden Costs
Hidden costs often surface in the following areas: substructure repairs, hidden fastener systems, railings, stairs, and drainage modifications. Roof skylight or irrigation integration can add substantial fees. Some projects require structural reinforcement or moisture barriers, which raise both material and labor estimates.
Price By Region
Regional price dispersion matters when budgeting a Trex deck. A typical mid-range project in the Sun Belt may land near the national average, while coastal metros may push totals higher due to rigidity in codes and higher wage scales. Rural projects can be more affordable, provided access is straightforward.
Real-World Pricing Examples
Three scenario cards illustrate common outcomes. Each card includes specs, labor hours, per-unit prices, and totals.
Basic
Deck size: 180 sq ft, material: Trex Enhance, basic framing, standard railing. Labor 10–12 hours. Trex board: $2.80/linear ft; installed $8.00/sq ft; total around $4,000–$5,000.
Mid-Range
Deck size: 250 sq ft, material: Trex Select, added railing, fascia trim. Labor 14–18 hours. Trex board: $4.75/linear ft; installed $12.00/sq ft; total around $6,000–$9,000.
Premium
Deck size: 320 sq ft, material: Trex Transcend, complex layout, accented lighting, premium railing. Labor 22–28 hours. Trex board: $7.50/linear ft; installed $16.00/sq ft; total around $10,000–$15,000.
Assumptions: region, specs, labor hours.