When budgeting a 100 ft chain link fence, buyers typically see costs driven by material grade, height, labor, and site conditions. This article presents the price ranges you can expect for an installed 100 ft chain link fence, with clear low-average-high figures and per-unit details.
Introduction notes: Prices assume standard 9-foot posts, 6-foot chain link, basic gate(s), and typical residential labor in a suburban setting.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed fence (100 ft, standard 6 ft height) | $1,000 | $1,900 | $3,000 | Includes posts, fabric, tie wires, and gates |
| Per linear foot (installed) | $10 | $19 | $30 | Typical range by region and access |
| Gate(s) addition (single 4 ft) | $350 | $500 | $900 | Labor and hardware included |
| Post concrete (per hole) | $8 | $15 | $25 | Concrete mix and installation |
| Removal/haul-away (if existing fence) | $150 | $350 | $650 | Depends on access and waste disposal |
Assumptions: Midwest labor rates, standard 6 ft chain link, no heavy gate hardware, level ground, and typical soil for post setting.
Total price spectrum for a 100 ft chain link fence, installed
Most homeowners pay between $1,000 and $3,000 for a completed 100 ft chain link fence with a couple of gates. The average commonly lands around $1,900 to $2,500 in many suburban markets. Costs rise with taller sections, heavier gauge wire, upgraded coatings, or difficult site access. Regional differences can push the high end above $3,000 where labor rates are higher or the project requires trenching or slope work.
Assumptions: Level yard, standard 6 ft fabric, zinc-coated galvanized steel, and a single 4 ft gate in a typical backyard lot.
Material and labor dominate the quote, with concrete, hardware, and gate costs shaping the final price. A compact breakdown helps buyers compare bids without guessing where money goes.
Below is a compact cost components table often found in quotes for a 100 ft chain link project.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (fabric, posts, ties) | $600 | $1,000 | $1,800 | Includes galvanized steel and fittings |
| Labor | $600 | $1,000 | $1,500 | Installation, post setting, and edging |
| Concrete / post setting | $80 | $240 | $500 | Depends on soil and depth |
| Gates and hardware | $250 | $500 | $900 | Single or double gate options raise cost |
| Delivery / site prep | $40 | $100 | $200 | Access and material staging affect pricing |
| Permits / inspections | $0 | $50 | $250 | Municipal rules vary by city |
Increasing height from 6 ft to 8 ft typically adds 20%–40% to the material and labor costs. Denser mesh or heavier gauge wire also increases per-foot pricing and may require stronger posts or more concrete. For example, 6 ft standard chain link may range $10-$20 per ft, while 8 ft or heavy-gauge options can push to $20-$30 per ft installed in some markets.
Assumptions: Standard residential installation with one 4 ft or 6 ft gate and uncomplicated ground conditions.
Coastal and metropolitan areas tend to be higher than rural regions due to higher labor costs. Expect roughly 10%–40% variance between markets. For example, a suburban Northeast bid may sit near $2,000–$2,800, while a simpler Midwest project could land around $1,400–$2,200.
Assumptions: 6 ft height, standard galvanized steel, standard gate count, and accessible terrain.
Adding a rising number of gates, extra long spans, or decorative coatings can change the price meaningfully. Fence lighting, privacy slats, or anti-climb features add both materials and labor charges. Specialty finishes or powder coatings may add 15%–25% on top of base material costs.
Assumptions: One main gate, no custom finishes beyond standard galvanized or vinyl-coated options.
Scope control and upfront planning reduce surprises at sign-off. Consider sticking to a single-gate plan, reuse existing fence line where possible, and avoid upgrading to higher-performance coatings unless necessary. Scheduling during non-peak seasons may also yield lower labor rates.
Assumptions: No large trenching, no slope grading, no excavation beyond standard post holes.
Per-foot pricing typically ranges from $10 to $30 installed depending on height, gauge, and regional labor costs. See the table for representative quotes with common configurations.
| Configuration | Per Foot | Total (100 ft) | |
|---|---|---|---|
| 6 ft galvanized chain link, no gate | $12-$20 | $1,200-$2,000 | Standard residential use |
| 6 ft vinyl-coated chain link, single 4 ft gate | $18-$28 | $1,800-$2,800 | Higher durability and color choice |
| 8 ft height, standard gauge, one gate | $22-$30 | $2,200-$3,000 | Greater privacy and security |
| 8 ft height, two gates | $28-$36 | $2,800-$3,600 | Additional hardware and permits may apply |
Typical quotes assume labor hours in the 14–28 hour range depending on site conditions. The final number reflects the local wage rate, material supplier pricing, and any site-specific challenges.