For 1x6x16 fence boards, buyers usually pay a price that varies by material, grade, and region. The cost to purchase these boards typically ranges from about $1.50 to $6.50 per board, with regional delivery surcharges and seasonal demand affecting the final total. The primary cost drivers are material type, board grade, and quantity, plus any delivery or handling fees. This article breaks down the price, per-unit options, and concrete ranges to help plan a budget for a 1x6x16 fence project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 1x6x16 Pressure-Treated Pine | $1.50 | $2.75 | $4.50 | Common, moisture-treated; best for low-maintenance exterior walls |
| 1x6x16 Cedar | $3.50 | $4.75 | $6.50 | Longevity and appearance; higher upfront cost |
| 1x6x16 Redwood | $4.00 | $5.75 | $7.50 | Premium option; best for natural look |
| Delivery Fee (regional) | $0 | $50 | $120 | Depends on distance and carrier |
| Quantity (per 100 boards) | $150 | $275 | $650 | Bulk pricing may apply |
Assumptions: Midwest labor rates, standard grade boards, standard 8–12 ft ladder access, typical load/unload handling.
Typical Cost for 1x6x16 Fence Boards by Material Type
Material choice drives the most variance in price. For a standard install, the per-board cost spreads from affordable pressure-treated pine to premium cedar or redwood options. Expect roughly $1.50-$6.50 per board depending on material and finish. A typical 1x6x16 fence line that uses 60 boards would cost in the $90 to $390 range for boards alone, before labor and hardware are added.
| Material | Low per Board | Avg per Board | High per Board | Notes |
|---|---|---|---|---|
| Pressure-Treated Pine | $1.50 | $2.75 | $4.50 | Most economical; widely available |
| Cedar | $3.50 | $4.75 | $6.50 | Good rot resistance; natural look |
| Redwood | $4.00 | $5.75 | $7.50 | High-end aesthetics and durability |
Assumptions: standard 16-foot long boards cut to 16-inch on-center spacing, 8-foot tall fence count.
Impact of Board Grade and Finish on Price
Grade defines straightness and defect levels. Higher grades yield fewer knots and less waste, which raises cost per board but can reduce waste and labor time in installation. Grade ranges commonly add $0.50 to $2.50 per board above base material prices, depending on supplier and stock.
| Grade | Cost Impact per Board | Typical Scenarios | Notes |
|---|---|---|---|
| Standard | $0.00-$0.50 | Common backyard projects | |
| Select | $0.50-$1.50 | Fewer knots; cleaner appearance | |
| Premium | $1.50-$2.50 | Minimal defects; premium species |
Regional Price Variations and Delivery Impacts
Prices fluctuate by region due to supply, demand, and freight. In coastal or urban markets, expect higher base rates; rural areas may see lower base prices but higher delivery fees. Typical delivery adds $0 to $120 per order. Regionally, per-board prices can swing by 20%–40% from national averages.
Estimating Board Quantities for a 1x6x16 Fence Run
Estimating requires board count based on linear footage. A 6-foot tall fence with 1x6x16 boards spaced 1/4 inch apart yields close to 15 boards per 8 linear feet; a longer run scales linearly. For budgeting, multiply board price by total board count, then add 10% for cuts and waste.
| Scenario | Linear Footage | Boards Needed (est) | Board Cost Range | Notes |
|---|---|---|---|---|
| 20 ft fence run | 240 in | 40 | $60-$260 | Material only |
| 60 ft fence run | 720 in | 90 | $135-$585 | Assumes standard spacing |
Assumptions: yard layout allows straight runs; no corners beyond simple angles.
Labor and Installation: How Boards Fit into Overall Cost
Labor to install 1x6x16 boards adds on average $2–$6 per linear foot, depending on terrain, yard access, and whether fencing posts are already set. For a 60-foot run, labor can range from $120 to $360. The board price plus labor typically dominates the initial budget, with hardware and fasteners adding another $20–$60.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Boards | $90 | $390 | $585 | 60 boards at $1.50–$9.75 per board |
| Labor | $120 | $300 | $420 | Perimeter installation varies by crew |
| Hardware | $20 | $40 | $60 | Screws, brackets, hits |
| Delivery | $0 | $50 | $120 | Distance-based |
Cost Drivers: Board Size, Spacing, and System Type
Spacing and system type affect waste and labor. A typical 1x6x16 board used for vertical fencing assumes 1/8 to 1/4 inch spacing and standard posts. Smaller gaps or full-coverage boards increase material usage and cost, while pre-sanded or pre-stained finishes raise the price per board by a modest margin.
Seasonal Trends and Timing Effects on Price
Prices can shift with demand; peak construction seasons often raise material costs and curbside stock. If timing allows, scheduling in early spring or late fall may yield modest savings. Expect 5%–15% variability by season in intensive markets.
Pricing Scenarios for a Typical 60-Foot Fence Run
Using 60 feet as a reference, here are three practical scenarios. Low scenario uses pressure-treated pine with basic labor; Average uses Select grade pine with standard labor; High uses cedar with premium labor and delivery. Perimeter quotes should reflect local taxes and any permit needs.
| Scenario | Material | Boards (count) | Board Cost Range | Labor Range | Total Range |
|---|---|---|---|---|---|
| Low | Pressure-Treated Pine | 40-48 | $60-$105 | $120-$180 | $240-$385 |
| Average | Select Pine | 50-70 | $125-$340 | $180-$300 | $305-$640 |
| High | Cedar | 60-90 | $270-$540 | $260-$420 | $530-$960 |