A 200-foot wood fence typically costs $4,000-$12,000 installed, with a common average near $7,000 for a basic six-foot privacy fence. The final price depends on wood species, fence height and style, terrain, old-fence removal, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed 200-foot wood fence | $4,000 | $7,000 | $12,000 | Typical six-foot fence, standard access |
| Installed price per linear foot | $20 | $35 | $60 | Style, lumber, and labor change the rate |
| Materials only | $1,600 | $3,000 | $5,000 | Posts, rails, pickets, and fasteners |
| Removal of an existing fence | $400 | $900 | $1,600 | About $2-$8 per linear foot |
What a 200-foot wood fence installation usually costs
For a straightforward project, contractors commonly charge about $20-$45 per linear foot for a basic wood fence, or $4,000-$9,000 for 200 feet. A six-foot privacy fence in pressure-treated pine often lands around $5,000-$8,000. Cedar, decorative layouts, difficult digging, or a sloped yard can push the installed rate to $45-$60 per foot or more.
These estimates assume a residential property, standard post spacing, ordinary soil, and no major gate or demolition work. A 200-foot boundary may include corners and gates that require extra bracing and hardware. Assumptions: U.S. mid-market labor rates, six-foot fence, standard materials, and normal site access. A practical planning budget for a standard project is $6,000-$9,000.
How posts, pickets, and labor shape the quote
Materials and installation are the largest parts of most fence estimates. Ask whether the quote includes concrete, fasteners, gates, cleanup, and tax; a low per-foot price may leave these items out. The ranges below describe a 200-foot project and can vary with lumber prices and site conditions.
| Cost component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Lumber and hardware | $1,600 | $3,000 | $5,000 | Posts, rails, boards, fasteners |
| Labor | $1,800 | $3,200 | $5,000 | Layout, digging, assembly |
| Equipment and concrete | $250 | $600 | $1,200 | Auger, post mix, small tools |
| Delivery and disposal | $100 | $500 | $1,400 | Lumber delivery or old-fence haul-away |
| Gate and hardware allowance | $150 | $500 | $1,200 | One walk gate; larger gates cost more |
Labor often works out to roughly $9-$25 per linear foot, depending on the crew, fence design, and digging conditions. A two- or three-person crew may need two to four workdays for a typical 200-foot installation, including layout and cleanup. Confirm that labor includes setting posts, attaching rails and boards, and leaving the work area clean.
Does fence height, wood species, or slope change the price?
Height and design affect both lumber quantity and installation time. A four-foot picket fence may cost $15-$30 per foot installed, while a six-foot privacy fence often runs $25-$45. An eight-foot fence can reach $40-$70 per foot where local rules allow it, because it uses more material and may need stronger posts.
Pressure-treated pine is usually the lower-cost choice; cedar commonly adds about 20%-50% to lumber costs. A horizontal-board or board-on-board design can add another 15%-35% compared with a simple vertical privacy layout. On a slope, stepped or racked construction may add 10%-25%, especially when the grade changes by more than a few inches over each 8-foot panel. Measure height, slope, and total gate openings before comparing estimates.
Three 200-foot fence quotes with different specifications
A basic quote for 200 feet of four-foot pressure-treated picket fencing might total $4,200-$6,000, including standard posts, one walk gate, and straightforward installation. That equals about $21-$30 per foot. It suits a simple boundary but provides less privacy than a taller board fence.
A common six-foot privacy-fence quote using treated pine may total $6,000-$9,000, or $30-$45 per foot. This assumes average access, one walk gate, and no removal of an existing fence. A cedar privacy fence with a second gate, decorative cap, and uneven ground could run $9,000-$13,000, or $45-$65 per foot.
Compare each quote using the same height, wood species, gate count, and removal scope. Otherwise, the lowest total may simply cover fewer materials or less work.
What removal, gates, and permits add to 200 feet
Removing an old wood fence usually adds about $2-$8 per linear foot, or $400-$1,600 for 200 feet. Heavy concrete footings, dense growth, or difficult access can raise the charge. A basic walk gate often adds $150-$500 installed; a wide double-drive gate may add $500-$1,500 or more, depending on framing and hardware.
Permit rules differ by city and county. Where a permit is required, allow roughly $50-$300 for the application, with additional charges possible for inspection or survey work. Local rules may limit fence height near streets or require approval for corner lots. Check permit and property-line requirements before materials are ordered.
How wood fence prices vary across U.S. markets
Labor and delivery can make the same fence cost different amounts by location. Dense urban markets and high-cost coastal areas may run 10%-25% above a typical national estimate. Rural areas can be 5%-15% lower for labor, but long delivery distances or limited contractor availability can offset the savings.
Local lumber supply also matters. Cedar may be relatively accessible in parts of the West and Northwest, while treated pine is widely used across the South and other regions. These are broad comparisons, not fixed regional price schedules. Request local quotes that list both the per-foot rate and the total project scope.
Which choices can lower the wood fence bill?
Keeping the design simple is often the most reliable way to control cost. A vertical treated-pine fence, standard 8-foot post spacing, and one appropriately sized gate usually cost less than custom spacing, premium lumber, or decorative tops. If only a short stretch is damaged, replacing that run may cost less than rebuilding all 200 feet.
Homeowners can reduce labor charges by clearing brush, marking known underground utilities through the appropriate service, and arranging access for the crew. Get at least three itemized estimates and compare post depth, concrete, lumber grade, cleanup, and warranty terms. A quote with a clear scope is more useful than a low per-foot figure alone.