A 2x6x14 pressure-treated board at Home Depot typically costs about $15-$28, with a planning average near $21 before tax or delivery. The price depends on store location, wood grade, treatment rating, moisture, and whether the board is in stock; larger purchases may also add delivery or cutting charges.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| One 2x6x14 pressure-treated board | $15 | $21 | $28 | Common ground-contact or above-ground stock; local shelf price varies |
| Price per linear foot | $1.07 | $1.50 | $2.00 | Board price divided by 14 feet |
| Ten-board material purchase | $150 | $210 | $280 | Before tax, delivery, and waste |
| Installed board replacement | $55 | $110 | $190 | One-board repair, including typical labor and basic fasteners |
Assumptions: U.S. retail pricing for standard pressure-treated pine, without sales tax; actual Home Depot inventory and price are store-specific.
What a 14-foot pressure-treated 2×6 usually costs
A single 2x6x14 pressure-treated board generally falls between $15 and $28 at Home Depot. A useful budget figure is approximately $21 per piece, or $1.50 per linear foot. Prices can shift with regional lumber supply, treatment category, board grade, and local store inventory, so the product listing or store shelf tag is the final reference for a specific purchase.
The dimensions are nominal. A typical surfaced board measures about 1.5 inches thick by 5.5 inches wide and 14 feet long. Pressure treatment protects wood against decay and insects, but it does not make every board suitable for every exposure. Above-ground-rated lumber and ground-contact-rated lumber can carry different prices and use restrictions.
For budgeting, allow $18-$25 per board for ordinary retail stock and check the treatment label before comparing prices. A board advertised at a lower price may have a different grade, treatment use, or appearance. Check for stamps or product details rather than comparing only the nominal size.
How lumber, labor, and delivery shape the quote
For a material-only purchase, the board itself is the largest expense. A repair or small build can bring additional costs for compatible fasteners, cutting, delivery, and labor. The table shows typical U.S. planning ranges; charges differ by store and contractor.
| Cost component | Typical price | What changes the charge | Typical scope |
|---|---|---|---|
| Pressure-treated 2x6x14 lumber | $15-$28 per board | Store, grade, treatment, availability | One standard-length board |
| Exterior-rated screws or nails | $5-$18 per small pack | Coating, quantity, connector requirements | Basic fastening for a small repair |
| Cutting service | $0-$10 per cut | Store policy and number of cuts | Simple length cuts where available |
| Local delivery | $50-$100 | Distance, order size, delivery tier | Small or medium lumber order |
| Carpenter labor | $60-$110 per hour | Market, access, demolition, finish work | Repair or installation work |
A contractor’s minimum service charge may be more important than the hourly rate for a one-board job. A brief repair can still incur a $100-$250 minimum, especially when travel, setup, and removal are included. The labor estimate can be modeled as .
Material-only and installed prices are not interchangeable. A homeowner buying lumber pays the board price plus any supplies and transport, while an installation quote may include inspection, removal of damaged wood, fastening, cleanup, and a minimum labor fee.
How board grade, treatment rating, and length change price
Pressure-treated boards are not always identical even when they share a nominal size. Lower-cost stock may have more knots, wane, or visible warp. Higher appearance grades can cost more, while structural suitability depends on the project design and grade stamp, not just how straight a board looks on the rack.
Treatment rating is a key specification. Lumber marked for above-ground use is intended for exposure conditions allowed by its label; ground-contact products are made for more severe exposure and may cost several dollars more per board. Use the rating required by the project and local code, rather than substituting a cheaper treatment category.
Length and actual dimensions also affect comparisons. A 12-foot board is not a direct substitute for a 14-foot board if the project needs a continuous 14-foot span. Cutting a longer piece may reduce waste in some layouts, but the available stock and extra length can raise the upfront cost. A warped or damaged board may also be unusable, making selection and a small waste allowance worthwhile.
Confirm both the treatment use and the intended structural grade before purchasing. For framing, stairs, decks, or other load-bearing work, follow the project plans and applicable code; a price comparison alone cannot establish whether a board is adequate.
How to lower the 2x6x14 lumber bill
Measure the project twice and make a cut list before buying. Each 14-foot board costs roughly $15-$28, so one unnecessary piece adds that amount plus possible delivery or disposal expense. A cut plan can reveal whether shorter lengths reduce offcuts, but account for seams, support locations, and the project’s structural requirements.
Compare the delivered total, not just the shelf price. A low-cost board can become more expensive after a separate delivery fee, while a larger combined order may qualify for a more favorable delivery rate. For a small purchase, carrying the board yourself may avoid a $50-$100 trip charge if the vehicle can transport it safely without bending or extending beyond legal limits.
Inspect boards before checkout. Choose straight pieces with sound ends and no severe splits, and ask about the store’s lumber return policy before purchasing. If the project is not visible or decorative, paying extra for a cleaner appearance may not provide value; for exposed deck edges or trim, appearance may matter more.
Keep the specification fixed while comparing quotes. Ask each seller for the same 14-foot length, treatment category, grade, and quantity. This prevents a lower quote from reflecting a different product rather than a genuine price saving.
Why Home Depot prices differ by region and delivery distance
Retail lumber pricing is local rather than a fixed national rate. A store in a high-cost metro area may price a board about 5%-15% above a lower-cost regional market, while nearby stores can differ because of inventory, promotions, and supplier costs. Rural locations may have fewer alternatives and higher delivery charges even when the shelf price is similar.
Delivery can create a larger difference than the board price when buying only one or two pieces. A $60 delivery charge adds $30 per board to a two-board order, but only $6 per board on a ten-board order. Some delivery tiers have minimum order values, distance limits, or unloading conditions, so confirm the total before checkout.
Online prices may not match the store shelf price or reflect the exact available grade. Inventory can also change rapidly during spring deck-building season or after storms. When comparing locations, check the same ZIP code, quantity, pickup or delivery method, and product treatment rating.
Use a 5%-15% regional adjustment as a rough planning allowance, then verify the local cart total. It is not a guarantee that every metropolitan store charges more; current stock and promotions can reverse the pattern.
How long a one-board replacement takes to install
Replacing one accessible, nonstructural board may take a carpenter about 1-2 hours, including removal, measuring, cutting, fastening, and cleanup. At $60-$110 per hour, that represents roughly $60-$220 in time before a contractor’s minimum charge, materials, or travel. Difficult access or a finish match can extend the visit.
Deck or porch repairs may take longer if the old board is screwed down, painted, trapped beneath railings, or attached to damaged framing. Removing a board without harming adjacent pieces can require careful cutting. If joists or supports are soft, the repair expands beyond replacing a single 2×6 and should be priced separately.
Do-it-yourself installation can avoid billed labor, but the actual savings depend on tool access and safe handling. A 14-foot board is awkward to move alone, and treated lumber should be cut and handled according to product safety guidance. Use exterior-compatible fasteners; ordinary interior screws can corrode prematurely in treated wood.
A simple replacement can cost more in labor than in lumber. For a contractor visit, ask whether the quote includes removal, disposal, fasteners, and any minimum service fee.
Three realistic purchase totals for common 2×6 projects
The examples below use a $21 average board price and typical local charges. They illustrate how the same lumber cost can lead to very different totals depending on quantity, installation, and delivery. Tax is excluded because rates vary by location.
| Example | Materials | Labor or delivery | Estimated total |
|---|---|---|---|
| One board picked up for a small repair | 1 board at $21, fasteners at $8 | Owner pickup; no hired labor | $29 |
| Four boards delivered for a deck repair | 4 boards at $21, fasteners at $15 | $65 delivery, 3 labor hours at $80 | $389 |
| Ten boards installed in an accessible area | 10 boards at $21, fasteners at $28 | $75 delivery, 6 labor hours at $80 | $853 |
In the four-board example, the material is $84, or $1.50 per linear foot across 56 total feet. The delivery and labor together account for $305. For the ten-board job, lumber totals $210 across 140 feet, while delivery and labor add $555.
Small jobs often have a higher installed cost per board because travel and setup do not shrink with the lumber quantity. Ask for labor as a separate line item so the board price can be compared independently.
Pressure-treated pine versus untreated or composite alternatives
Untreated pine may cost less upfront, but it is not a direct substitute where moisture, soil contact, or outdoor exposure requires treated material. A comparable untreated 2x6x14 can sometimes be around $10-$18, depending on species and grade, but using it in an unsuitable location can lead to early decay and replacement expense.
Composite deck boards are also not equivalent structural lumber. They are usually sold as decking, often at roughly $25-$60 or more for a 12-foot board, and require compatible framing and fastening details. A composite surface may be considered for visible decking, but it does not replace a pressure-treated framing member unless the product and plans specify that use.
Repairing only the damaged board can be less expensive than replacing a larger assembly, provided the supporting structure is sound. If multiple adjacent boards are decayed or the framing is compromised, replacing only one can postpone rather than solve the problem. Have structural damage assessed before treating a material-only price as the full project budget.
Choose alternatives by intended use and service life, not by purchase price alone. Pressure-treated pine is commonly selected for outdoor framing because treatment is built into the product, while appearance, exposure, and maintenance needs determine whether another material makes sense.