Three-quarter-inch EMT conduit typically costs $5-$12 per 10-foot stick, while a professionally installed straight run often totals $8-$20 per linear foot. The 3/4-inch EMT price depends on local supply, fittings, labor, mounting conditions, and whether the job includes bending or removal of old conduit.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| EMT conduit, 10-foot stick | $5 | $8 | $12 | Standard galvanized steel |
| Installed straight run | $8 per ft | $13 per ft | $20 per ft | Accessible surface-mounted work |
| Connector or coupling | $0.50 | $1.50 | $4 | Each; type and finish affect price |
| Small contractor visit | $150 | $350 | $700 | Minimum charge and scope vary |
What 3/4-inch EMT costs by stick and installed foot
A 10-foot stick of standard 3/4-inch electrical metallic tubing generally sells for $5-$12 at U.S. hardware and electrical suppliers, with a typical shelf price near $8. That is about $0.50-$1.20 per linear foot before fittings, tax, and delivery. Heavier-duty or specialty-coated tubing can cost more.
For a basic surface-mounted installation, budget roughly $8-$20 per linear foot, including ordinary materials and labor. A 50-foot accessible run might total $400-$1,000; short jobs can exceed that per-foot range because contractors often charge a service minimum. Assumptions: standard galvanized steel, ordinary indoor access, typical materials, and no major panel or wall repairs. Material alone is inexpensive; labor and job minimums usually drive the installed total.
How conduit, fittings, and labor appear on a quote
Quotes may show materials as a bundle or list each item separately. A straight run needs connectors at box entries, couplings between sticks, and supports; turns may require field bends or factory elbows. Ask whether the estimate includes tax, delivery, and cleanup.
| Quote component | Typical price | Pricing basis | What changes it |
|---|---|---|---|
| 3/4-inch EMT | $5-$12 | Per 10-foot stick | Brand, gauge, local stock |
| Connectors and couplings | $0.50-$4 | Per fitting | Compression or set-screw type |
| Straps and anchors | $0.25-$2 | Per support point | Mounting surface and spacing |
| Electrician labor | $75-$150 | Per hour | Market, access, and crew |
| Delivery or disposal | $0-$100 | Per job | Order size and old conduit removal |
Typical electrical labor rates are $75-$150 per hour, though a small project may carry a $150-$350 minimum. Confirm whether the quote prices labor by the hour, by the foot, or as a fixed project charge.
Run length, bends, and wall access shift the estimate
Length affects material totals, but layout can matter just as much. A straight, exposed 100-foot run may install faster per foot than a 20-foot path with several offsets, tight corners, and crowded equipment. More than four bends in a short run can add layout and pulling time, especially if the conduit must pass around existing pipes.
Mounting height and surface also change labor. A run under 8 feet on open framing is usually easier than work above 10 feet that needs ladders, lifts, or ceiling access. Concrete, masonry, and finished drywall may require special anchors, drilling, or patching. Request a site-specific price when access or the route is uncertain.
Save on a 3/4-inch EMT run without cutting corners
Grouping several runs into one visit can spread the contractor’s minimum charge across more work. Measure the route and identify box locations before requesting bids, but leave code-compliant routing and conductor-fill decisions to the electrician. Keeping the path accessible and avoiding unnecessary offsets can reduce installation hours.
Compare quotes with the same scope: footage, fittings, supports, surface type, removal, and finish work. Buying conduit independently may not save money if the contractor needs a different brand or charges for pickup. Avoid choosing a lower price that excludes grounding or required connections. Scope clarity is usually a safer saving than using fewer supports or unsuitable fittings.
Electrician hours matter more on short conduit jobs
One electrician may install an uncomplicated exposed run in a few hours, while a helper can speed up longer routes or overhead work. A 30-foot straight garage run might take 2-4 labor hours; a 100-foot route with multiple bends and drilling can take 6-12 hours. These are planning ranges, not guaranteed production rates.
At $75-$150 per hour, 2-4 hours of labor equals $150-$600 before materials, but minimum charges may set a higher total. Scheduling around other electrical work can reduce repeat visits. Ask whether travel, testing, and cleanup are included in the stated labor hours.
Regional material and labor prices vary across the U.S.
Material pricing is often fairly similar across nearby markets, but shipping and local inventory can create noticeable differences. Labor tends to vary more: metropolitan areas with higher wages may run 15%-30% above national midrange estimates, while rural markets can be 5%-15% lower when contractors are available locally.
Remote locations may reverse that advantage if travel charges apply. In storm-repair periods or during busy construction seasons, limited electrician availability can also raise scheduling fees. Compare local quotes using the same footage and installation conditions rather than relying only on a national per-foot average.
Fittings, removal, and difficult mounting add charges
Compression connectors, weather-resistant fittings, and specialty boxes can cost more than basic set-screw parts. Extra bends may add roughly $10-$40 each in labor, depending on access and complexity. Removing existing conduit can add $2-$6 per linear foot when it is accessible; embedded or tangled runs may cost more.
Ceiling work, drilling through masonry, lift rental, and patching are commonly priced separately. Outdoor exposure may call for compatible weatherproof boxes and fittings, adding $10-$50 or more per connection point. Check the estimate for exclusions before comparing its bottom line.
Three 3/4-inch EMT quote examples by job scope
A 20-foot garage run with two bends, basic supports, and an accessible wall might use two sticks plus fittings. At 2-3 labor hours and $75-$150 per hour, an approximate total is $200-$550, depending on the contractor’s minimum.
A 50-foot open basement run with several boxes and moderate bends could total $400-$1,000, including roughly $40-$100 in conduit and fittings and about 4-6 labor hours. A 100-foot commercial surface run with 8-12 bends, overhead mounting, and a helper may land around $1,000-$2,500. These examples assume no panel upgrade, permit work, concealed wiring, or extensive demolition.